Stellar Home SEA12 User manual
Dual Zone Induction HobDual Zone Induction Hob Dual Zone Induction Hob
Portable Touch Control
Dual Zone
Induction
Hob
Instruction
Manual
Model No. SEA12
Please read this instruction
manual carefully before use
and save for later reference.
Unpack your Induction
Hob carefully and remove
packing pieces, labels and
stickers before use.
The Stellar Guarantee covers the product to be free of
defects in materials and workmanship for a period of TWO
YEARS from the date of original retail purchase. During this
period, Stellar will, at our option, repair or replace defective
parts of the product, or replace the product, providing the
Use, Care and Safety Advice has been followed.
Stellar 2 Year Domestic Electrical Guarantee
YEAR
GUARANTEE
DOMESTIC
ELECTRICAL
USE
STELLAR
The Guarantee does not cover damage, defect or failure caused by or resulting from
accidents, external damage, alteration, modification, abuse, misuse or misapplication.
The Guarantee does not cover any damage caused by taking the appliance apart
yourself, or attempting to repair the appliance yourself.
THE PRODUCT IS INTENDED FOR DOMESTIC USE ONLY.
Please keep your Purchase Receipt and contact us directly if you encounter any
problems with your product.
HORWOOD SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT (INCLUDING COLOUR
FADING, SCRATCHES OR ACCUMULATED DIRT) WITHOUT FOLLOWING THE USE,
CARE & SAFETY INSTRUCTIONS.
Note: Due to the introduction of improvements from time to time, the right
is reserved to supply products which differ slightly from those illustrated and
described in this publication.
Errors and Omissions Excepted.
STELLAR CUSTOMER SERVICES, HORWOOD, AVONMOUTH WAY,
BRISTOL, BS11 9HX, GREAT BRITAIN
www.stellarcookware.co.uk
Tel: 0117 940 0000
Specification
Name Model No. Power Supply Max.Wattage Temp. Range
Dual Zone Induction Hob SEA12 220-240V
50Hz
3100W 40°C - 220°C
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental
safe recycling.
FOR DOMESTIC USE ONLY
• Do not insert plug with wet hands.
• Do not operate this device using a Timer/
Controller, or remote control system.
• Do not use outdoors.
• Do not place the Hob near a hot gas or
electric burner, or in a heated oven.
• Do not use the hob in high humidity
conditions.
• The hob should be placed on a level
stable worktop at least 10cm from walls
or other solid obstructions.
• Do not use the Induction Hob on a metal
table.
• Do not use the Induction Hob on a carpet
or tablecloth - the air circulation fan
ports are underneath the hob, and could
become blocked with fibres.
• Do not move the Induction Hob whilst in
operation. Never move the hob by pulling
the power cord
1
.
• Ensure that the power cord
1
does not
trail over the edge of the worktop, and
that it is kept away from any hot object.
• Do not operate the appliance if the Power
Cord
1
has been damaged: contact
Stellar at the address given.
• Close supervision is necessary when used
by, or near, children or the infirm.
• The Hob Plate
2
may remain hot
immediately after cooking.
• Never use the appliance when it has been
dropped, shows damage or does not
function properly: contact Stellar at the
address given.
• Do not attempt to repair the Induction
Hob yourself: contact Stellar at the
address given.
• Use the appliance only for its intended
purpose.
• Extreme caution must be used when
moving pans containing hot oil or other
hot liquids.
• Do not heat empty pans, as bases may
distort and become ineffective for future
use.
• Do not touch hot surfaces - always wear
oven gloves when handling hot pans.
Disconnect by turning the Induction Hob
OFF
8
and removing the power cord
plug
1
from the wall socket at the end of
your cooking session, and ALWAYS before
cleaning when the unit has cooled.
• Keep the unit clean, and prevent foreign
matter from entering the Air Circulation
Ports
10
.
• Do not immerse the appliance in water.
• Do not place the Induction Hob close to
devices or objects which are sensitive to
magnetic fields - radios, TVs, recording
devices, credit cards etc.
• Persons with PACEMAKERS should
keep a minimum distance of 60cm from
Induction Hobs - seek the advice of a
doctor.
• Do not leave ‘out of use’ cookware on the
Hob Plate - this will become hot if the hob
is inadvertently switched ON.
• The hob plate
2
is temperature resistant
glass. If it has been damaged in any
way, even if the damage is minor, do not
operate the unit: contact Stellar at the
address given.
• Do not attempt to insert wires or tools
into the Air Circulation Ports
10
, as this
could lead to electric shock.
• Do not heat unopened tins on the
Induction Hob as they could explode.
• Do not dispose of any electrical product
as part of household waste. Check
your recycling facilities with your local
authority.
Dual Zone Induction Hob Dual Zone Induction HobDual Zone Induction Hob
Identifying your
Induction Hob’s parts
1. Power Cord & Plug
2. Hob Plate
3. Large Heating Zone
4. Small Heating Zone
5. Temperature Control
for Large Heating Zone
6. Temperature Control
for Small Heating Zone
7. Timer Control for both
Large and Small
Heating Zones
8. On/Off switch
9. Lock for Settings
10. Air Circulation Ports
How Induction Hobs work
An Induction Hob heats in a dynamically
new way. A very strong magnetic field is
created by electricity running through an
electrical coil positioned under a ceramic
plate. The ‘induction current’, created by
the magnetic field, generates heat in any
magnetic cookware, when standing on the
ceramic plate.
Features
The Stellar Portable ‘Touch Control’ Dual
Zone Induction Hob has many advantages:
• Safe: Only the pans are heated - the
ceramic plate remains relatively cool.
• Clean: Because the ceramic plate stays
relatively cool, spilt food will not burn-on
to the surface, and can be simply wiped
off at the end of cooking.
• Energy Efficient: Induction Hobs consume
less electricity.
• Controllable: Hob temperatures can be
set in 8 steps -
220°C
180°C
140°C
90°C
80°C
60°C
40°C
100°C
• Please note these temperature settings
are approximate and must be used as a
guide only. Temperatures will vary + or -
10° depending upon the type of cookware
used
• Cooking temperatures are reached in
seconds: then heat can be reduced from
a fast boil to a gentle simmer extremely
quickly compared to conventional hobs.
• Easy to use: sensitive ‘touch control’
switches - positive and easy to clean.
Suitable cookware for
Induction Hob use
Only pans that are MAGNETIC can be used
on Induction Hobs. Most recent Stellar,
Judge, and Horwood cookware is induction-
ready, and is described as ‘Suitable for ALL
Hobs’. Some cookware, although made of
non-magnetic materials, has special Bases
which allow efficient working on Induction
Hobs. It is easy to see if your current
cookware is suitable for use on an Induction
Hob - just see if a fridge magnet will stick
to the Base of the pans. If it does, the pan is
magnetic and will heat on an Induction Hob.
SUITABLE PANS
• Enamel Coated Steel, with or without a
non-stick coating.
• Cast Iron cookware, with or without an
enamel-coated base.
• Stainless Steel cookware specially
designed for Induction Hob use -
described on Stellar, Judge and Horwood
packaging as ‘Suitable for
ALL hob types’.
• Aluminium and ‘Hard Anodised’
cookware, ONLY if it has bases specially
constructed for Induction Hob Use.
UNSUITABLE PANS
• Glass, Ceramic, Earthenware, Aluminium,
Copper, unless the pans are fitted with
special Induction Hob Bases. Suitability
for Induction Hob use is usually made
clear on current cookware packaging.
• Any pan with a Base diameter of less
than 12cm.
The portable induction hob can be inset
into a typical kitchen worktop, so long as
the following guides are considered:
• Aperture required is 27cm x 50cm
• Allow adequate ventilation to the
underside all round, especially around
(10) the air circulation ports
• Ensure no ferrous (magnetic) metal is
placed within 15cm under the hob.
• We do not advice using a silicone mastic
to seal the hob in place, simply allow
gravity to hold it in place.
9
5 7 6
8
4
3
2
1
10
10
How to use the Hob
1. Plug-in the Hob to a socket.
2. A “beep” will sound to confirm
connection.
3. Place suitable cookware on one or both
heating zones
3
/
4
.
4. Touch the power switch
8
.
THEN FOR EACH ZONE:
5. Touch and the heating zone will
heat to Level 5.
6. The heat level can then be adjusted by
touching the and controls.
7. Pressing the control will lock the heat
setting - until the is touched and
held to unlock.
8. After a heating zone
3
/
4
has been
heated, the cooling fan
10
will operate for
one extra minute to cool the device.
Timer
• You can set the timer
7
for one of the
two heating zones
3
/
4
, or both zones
to the same time. Simply operate the plus
or minus controls for Timer.
• Settings may be locked by pressing the
control. Times can be set from
0 - 99 minutes.
Heating levels shown in power levels.
Hob temperatures can be set in 8 steps -
220°C
180°C
140°C
90°C
80°C
60°C
40°C
100°C
• Turn off the device by touching the power
switch
8
.
Error messages
• If a heating level is set when there is no
cookware or unsuitable cookware on the
heating zone, the display will flash ‘E’.
• E0: Cookware not present, is not suitable
for use with induction hobs or has an
induction base less than 12cm diameter;
hob powers off and “beeps” - use
compatible cookware.
If the following messages are shown on
the display, please contact Stellar at the
address given in the Warranty section.
• E1: Overheating of IGBT or damage to
thermal resistor
• E2 or E5: Damage to temperature
sensor/ dry boiling protection
• E3: Too high or too low supply voltage
How to clean the hob
The hob must be disconnected from mains
supply and completely cooled down
before cleaning.
• Hob Plate: Clean with a warm soapy
damp cloth, or occasionally a proprietary
Hob Cleaner.
• Casing: Clean with a warm soapy damp
cloth.
• Air Circulation Ports: Wipe surfaces with
a cotton bud, or warm soapy damp cloth.
• DO NOT immerse the Induction Hob in
water.
Important information
• Please read and understand this Manual,
and keep it for future reference.
• Please retain your Purchase Receipt.
• Check that the Electrical Supply ratings
of the appliance are correct for your
home (see Specification).
• The Induction Hob must be fitted to an
Earthed Socket, which should have an
individually rated load of above 10A. The
plug must be fully pushed into the socket.
Overheating could occur if a socket is
shared and overloaded.
Table of contents
