stilum agila 51 7021 601 User guide

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 1
post 1
post 2
pendulum seat
cable way trolley
cable
Diagram 1: Overall view of play equipment
brake spring
3,00m
brake spring
1,50m
climb

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 2
Pos.3 Pos.1
play level
Pos.4
Pos.2
Diagram 2: Foundation plan
1700 15002100 1000 1200 1700
600
600
L - 3450
450
3700
2700
L
450
2800
1700
1700 400
2500
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
agila Robinie 30m
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Name
Fundamentplan
1103-00-00
Maßstab
Schramm 24.10.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
DatumÄnderungRev
1700 15002100 1000 1200 1700
600
600
L - 3450
450
3700
2700
L
450
2800
1700
1700
400
2500
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
agila Robinie 30m
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:100
A3
Name
Name
Fundamentplan
1103-00-00
Maßstab
Schramm 24.10.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
DatumÄnderungRev

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 3
The cable car is available in lengths L = 20m, 25m, 30m, 35m
1. Select the location of the play equipment taking into account the required
minimum space (see diagram 3).
2. The impact area of a playground equipment with an enforced movement is
not allowed to overlap the impact area of other equipment.
According to DIN EN 1176-1, 4.2.8.5.2 shock-absorbing oors must be
made on the entire impact area of every equipment that cause forced move-
ment.
3. Carry out excavation work for the foundations as shown in diagram 2.
After excavation, compress the foundation oor.
Note: The cableway is only available with an installation depth of 450 mm.
The cableway is installed at play level.
Pay attention to items marked „play level“ at play equipment!
4. Set up two concrete foundations acc. to diagram 2, Pos.1 and Pos.2 with
reinforcement acc. to diagram 5 and 6 in the concrete quality class C25/30.
5. After a setting period of 10 - 14 days, depending on weather conditions and
foundation size - clean the surface of the foundations.
6. Place the front posts onto the foundation (Pos. 1 and 2 in diagram 2) and
align. Screw the posts with the pedestal and the climb to the foundations
with the included heavy-duty dowels.
7. Pour the rear stainless steel tubes into the foundations (Pos.3+4) with rein-
forcement acc. to diagram 7 in the concrete quality class C25/30. Support
the tubes during the setting period of the concrete foundation. Please make
sure that the concrete around the tubes is also compressed properly.
8. After a setting period of 10 - 14 days, depending on weather conditions and
foundation size - ll up and compress the holes between the foundation and
the foundation hole with the excavation.
4000
1500
L + 6300
L
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
agila
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
Rev Änderung Datum
1:100
A3
Name
Name
Draufsicht
1103-00-00
Maßstab
Schramm 24.10.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 3: Top view
Area of the minimum space

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 4
3700
45°
Feder
33251
2590
30000
2700
Federbefestigung
2000
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
agila Robinie 30m
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:100
A3
Gewicht
Name
Name
Übersicht
1103-00-00
684.3 Maßstab
Schramm 18.04.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
9. Cover the entire impact area with fall protection according to the required
drop height in accordance with EN 1176-1.
Critical drop height 1700 mm
Recommended surface material: sand, wood chip, gravel, synth. impact
protection.
10. Fasten the cable eyelet with the support shaft between the shackles of post
1 and fasten the brake springs (brake spring at the start: 1500 mm - at the
end: 3000 mm) and the cableway trolley.
11. Mount the cable tensioner onto the post 2, thread and screw the cable and
tighten the cable by wind up the cable tensioner (rope sagging of 1% - max.
2% rope sag).
12. Important note: Minimum distance of seat with load about 69,5 kg to
ground is 350 mm!
13. The brake spring at the end is to be xed in such a way that with a load of
69,5 kg on the seat and with a deection of 45° a barrier-free space of 2.00
m is still guaranteed (see diagram 4). The distance to the cable tensioner is
2590 mm.
14. Attach and screw the pendulum seat into the cableway trolley.
15. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
STAINLESS STEEL
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may
rub o󰀨 and leave small steel particles in combination with moisture brown rust
stains.
Diagram 4: Installation brake spring at the end
Spring
Spring fastening
3700
45°
Feder
33251
2590
30000
2700
Federbefestigung
2000
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
agila Robinie 30m
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:100
A3
Gewicht
Name
Name
Übersicht
1103-00-00
684.3 Maßstab
Schramm 18.04.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 5
Diagram 5: Reinforcement plan Pos.1
BSt 500 S(A)
Pos. Anz. ø Länge Bem.:
1 18 8 0.99
Gesamtgewicht 7.039 kg
Mattensummenliste
Pos. Anz. Bez/Typ Breite Länge
1 1 Q188A 2.30 4.00
3 1 Q188A 0.69 3.88
Gesamtgewicht 35.869 kg

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 6
Diagram 6: Reinforcement plan Pos.2
BSt 500 S(A)
Pos. Anz. ø Länge Bem.:
1 12 8 1.19
Gesamtgewicht 5.641 kg
Mattensummenliste
Pos. Anz. Bez/Typ Breite Länge
1 1 Q188A 2.30 3.00
Gesamtgewicht 20.838 kg

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 7
Diagram 7: Reinforcement plan Pos.3 and Pos.4
BSt 500 S(A)
Pos. Anz. ø Länge Bem.:
1 20 8 0.99
Gesamtgewicht 7.821 kg
Mattensummenliste
Pos. Anz. Bez/Typ Breite Länge
1 1 Q188A 1.60 4.40
Gesamtgewicht 21.261 kg

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instruction cableway „agila“ robinia
Item No. 51 7021 601
Status: 28.10.2021 | p. 8
MAINTENANCE: If such corrosion occur on stainless steel parts, they are ne to
remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the components are
made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse o󰀨 with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the playground equipment at intervals of
three to six months.
WOOD
NOTE: For all play equipment with wooden elements, it cannot be ruled out that
dry cracks may develop. These natural changes of wood are dependent on clima-
te conditions as well as on the age and usage of the play equipment. Longer dry
periods may lead to more dry cracks.
This development, however, does not represent a quality defect. Static properties of
the equipment are not impaired.
See EN 1176 Bbl 1:2019-01 4.2.7.6: Dry cracks in wood elements as a consequence
of weather conditions are not to be considered as dangerous openings in terms
of the standard due to the fact that the shape of the cracks (tapering towards the
inside) makes it almost impossible for ngers to get trapped in them.
MAINTENANCE: To ensure a long life of stilum playground equipment, wooden
surfaces should be regularly re-glazed. This provides the wooden surfaces with the
necessary protection and preserves the look. Areas which are not exposed to rain
should be regularly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6 to 12
months, or to shorten the cleaning interval to 3 to 6 months if the wheather condi-
tions are bad.
LASUR: Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with mild
javel water, which should in any case be rubbed o󰀨 afterwards. For resistant dirt use
a wood cleaner. Eventually a light abrasion is necessary. If water-based detergents
are used for cleaning, please ensure that the wood elements are thoroughly dried
before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.