
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodikationen vorbehalten Stand: 04.11.15 · S. 2 · MSö/DK
Mounting instructions for play house „intera“
Artikel - Nr. 515517401
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 4380mm x 3950mm).
2. Carry out excavation work for foundation as shown in Diagram 2a and 3a.
After excavation, compress the foundation oor.
Note: Cover the foundation holes with the safety cover required for the height
of fall indicated.The combination equipment is built in on the play level. Pay
attention to items marked „game level” of play equipment!
3. Set up the concrete foundation (LxWxH 2000 x 150 x 600 mm) acc. to the
dimensions indicated in diagram 2 in the quality class C 20/25.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the playground equipment. Drill holes into all foundations and screw
the play equipment into the foundations with the included heavy-duty dowels.
5. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1400 mm.
Recommended surface material: grass, sand, bark mulch, gravel, synth.
fall protection.
Bewehrungsplan: Beton-Fundament mit Bewehrung
Hauptfundament: BSt 500S
Je 4 Bügel Ø 8 mm längs und quer
Betonüberdeckung h = 3 cm
Betongüte C 20/25
1500
450
600
440
1283
2000
Kennzeichnung
Einbautiefe
Beton
Concrete
Füllmaterial
Filling
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0117-00-00
01.08.2014
Abmaße:
Fertigung:
M.Boehm
-
Gewicht:
Intera
Fundamentplan
1500
450
600
440
1283
2000
Kennzeichnung
Einbautiefe
Beton
Concrete
Füllmaterial
Filling
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0117-00-00
01.08.2014
Abmaße:
Fertigung:
M.Boehm
-
Gewicht:
Intera
Fundamentplan
Diagram 2: Rear view and foundation plan with dimension details „intera“