stilum turris 170 User manual

Mounting instructions for slide „turris 170“
Item-No. 51 3512 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 17.06.2016 p. 1
Diagram 1: Overall view of the play equipment

Mounting instructions for slide „turris 170“
Item-No. 51 3512 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 17.06.2016 p. 2
1. Select the play equipment location in consideration of the required safety area
(see Diagram 3: 7500 x 4000mm).
2. Carry out excavation work for 3 foundations as shown in Diagram 2. After
excavation, compress the foundation oor.
Note: The roundabout is built in on the play level. Pay attention to items
marked „game level“ of play equipment!
3. Set up the concrete foundations acc. to the dimensions indicated (LxWxH
900 x 800 x 400 mm for the main foundation, LxWxH 400 x 800 x 400 mm for
the ladder and 400 x 800 x 400 mm for the slide exit) with central, horizontal
reinforcement.
4. After a setting period of 10-14 days, depending on weather conditions an foun-
dation size, clean the surface of the foundations.
5. Place the slide tower with the ladder onto the main foundation and screw it
onto the foundation using the dowels M10 for heavy loads included in the
delivery.
Reinforcement plan: Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C50/25
400 900
400 450
2050525 400
900
400 900 400
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
05.04.2016
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF / ROHMAß:

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
B200001
Behnke Fundamentplan
turris
diagram 2: foundation plan
400 900
400 450
2050525 400
900
400 900 400
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
05.04.2016
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF / ROHMAß:

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
B200001
Behnke Fundamentplan
turris
Betonfundamente
400 900
400 450
2050525 400
900
400 900 400
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
05.04.2016
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF / ROHMAß:

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
B200001
Behnke Fundamentplan
turris

Mounting instructions for slide „turris 170“
Item-No. 51 3512 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 17.06.2016 p. 3
6. Hang the slide onto the slide tower and screw it onto the slide tower and ont
the oor panels on the foundation of the slide exit.
7. Seal the foundation with the safety cover required for the height of fall indica-
ted.
Free fall height: 1.700 mm
Recommended surface material: sand, bark mulch, wood chip, gravel,
synth. fall protection.
8. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to particu-
lar risks of injury for the user. For this reason, make clearly visible that the equip-
ment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub off and
leave small steel particles in combination with moisture brown rust stains.If such
corrosion occur on stainless steel parts, they are ne with an abrasive (240 grit) to
remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
Diagram 3: Top view „turris“
Extent of the minimum zone =
safety area
7320
4000
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
04.04.2016
Abmaße:
Fertigung:
Behnke
Gewicht:
Draufsicht
B3 00012
turris 150
Diagram 3: Connection tower and slide.

Mounting instructions for slide „turris 170“
Item-No. 51 3512 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved. State: 17.06.2016 p. 4
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefo-
re cleaning is advisable at intervals of six to twelve months – whereby in the case
of strong soiling it is appropriate to clean the playground equipment at intervals of
3 to six months.