Strainrite PETSTOP User manual
Powered by
25m
COMPLE TE
FENCE KIT
OUTPUT ENERGY
STORED ENERGY 0.5J
0.3J
GUARANTEE
This energizer, manufactured by Nemtek (Pty) Ltd, is guaranteed for a period of two years from date of sale against defects
due to faulty workmanship or materials. Strainrite Fencing Systems will, at its discretion, either repair or replace a product
that proves to be defective.
Strainrite Fencing Systems guarantees that the product, when correctly installed and used in line with the
specication as determined by Strainrite Fencing Systems from time to time, will execute its designed function.
Strainrite Fencing Systems does not guarantee that the operation of the product will be uninterrupted and totally
error free. Faulty units must be returned to the place of purchase with receipt. The buyer shall pay all shipping and other
charges for the return of the product to Strainrite Fencing Systems.
LIMITATION OF GUARANTEE
The guarantee does not apply to defects resulting from acts of God, modications made by the buyer or any third party,
misuse, neglect, abuse, accident and mishandling.
EXCLUSIVE REMEDIES
The remedies provided herein are Strainrite Fencing Systems sole liability and the buyer’s sole and exclusive remedies
for breach of guarantee. Strainrite Fencing Systems shall not be liable for any special, incidental, consequential, direct or
indirect damages, whether based on contact, tort, or any other legal theory. The foregoing guarantee is in lieu of any and
all other guarantees, whether expressed, implied, or statutory, including but not limited to warranties of merchantability
and suitability for a particular purpose.
PRODUCT SPECIFICATIONS
Power Supply 12 V battery (10 V to 15 V)
Current consumption 0.045 A
Output Energy(max) 0.3 J
Maximum Fence Voltage 7 Kv
Dimensions W x H x D (mm) 115 x 190 x 76
Environmental rating IP 65
Weight 0.65 Kg
Solar panel 12 V / 3 W
Currently, this energizer is designed and manufactured in South Africa for the South African and international markets.
More information on our products and general information are available on our web site at www.strainrite.co.nz
CONTACT DETAILS
Website:www.strainrite.co.nz
E-mail: [email protected]o.nz
SPK00049
INSTALLATION
INSTALLATION VIDEO
A full installation video is available
online at www.strainrite.co.nz
Or via our Youtube Channel
TOOLS REQUIRED
Block of Wood or Rubber Mallet
Wire Cutter
19mm Spanner or Adjustable Wrench
Phillips Screw Driver
Safety Gloves
Felt Tip Marker or Permanent Marker
Measuring Tape
CONTENTS
1 x Pet Energizer
1 x 3W Solar Panel
1 x Earth Stake
1 x Earth Cable
1 x Warning Sign
1 x 12v 2Ah Battery
1 x Mounting System
1 x 200m Polywire
8 x Fibre glass Rods
24 x Spring Clips
2 x Phillips Screws
CONGRATULATIONS on your purchase of the Strainrite PETSTOP DIY Electric Fence Kit.
The PETSTOP Kit is the perfect solution to keep your pets away from ower beds or refuse areas.
Inside this box is a complete low-power DIY electried fence kit which, once installed, delivers a harmless electric shock that
is safe for children, animals and adults but is usually well remembered.
You can also install the system on top of a fence line or a wall to keep pets inside or out or cordon o fruit trees to fend of
possums.
STEP 1 CHARGE YOUR BATTERY
Connect the Solar Panel to the Battery only. Place in direct sun for a day or 8 hours. This will ensure the battery is fully
charged when the energizer load is attached.
STEP 2 PLAN YOUR FENCE LOCATION
Use a tape measure to map out the area requiring the electric fence and position of the bre glass rods.
How many wires are you running? The solar power unit needs to be placed in a position to get as much sunlight as
possible generally north facing unobstructed by shade. Consider the location of the energizer. Does it need to be
protected inside the fence or is sitting outside the fence installation suitable. Mark position.
STEP 3 FIBRE GLASS ROD ASSEMBLY
Attach the spring clips to one of the bre glass rods using safety gloves. With the over run end facing down squeeze
the spring clip and slide over the rod. Use as a template to mark out the location on the remaining posts.
STEP 4 INSTALL POSTS
Install the posts into soft ground using a block of wood or rubber mallet. Try not to damage the posts and use safety
gloves when handling.
STEP 5 RUN POLYWIRE
Tie o the Polywire on the bottom end of one post, feed the wire across or around the bottom row feeding through the
spring clip eyelet that has an over run end. In one continuous length feed the polywire up to the next run and repeat
until you are at the top. On the top row of the last post, tie o and leave plenty of cord to reach the energizer.
Mount the warning sign.
STEP 6 ASSEMBLE THE ENERGIZER
Attach the Solar Panel to the Mounting System using the 2 screws provided Install the Earth Stake into the ground and
remove the top nut and washer. Place the mount over the Earth Stake and drop the Earth Cable over the end of the
stake feeding out to the right side of the frame and secure with washer and nut. Push the black and red insulated
cables through the hole to the front of the mount and connect to the energizer plugs colour coded on the under side.
Attach the earth cable to the green terminal and wrap the polywire around the red terminal.
STEP 7 OPERATING THE ENERGIZER
WARNING: The following steps will activate the electric fence
Place the battery in the carriage in the back of the mount. Connect the Black (-) battery lead to the black (-) clip
Connect the Red (+) battery lead to the Red (+) clip. The energizer will begin pulsing every 1.5 seconds
The Energizers display INPUT VOLTAGE Indicated the Battery Level GREEN Battery is ok. YELLOW Battery is low. RED Battery is at
The Energizers display ENERGIZER ashing RED Indicating power output from the red terminal pulsing every 1.5 seconds.
POLYWIRE going through one
eyelet of the spring clip
CONGRATULATIONS
Table of contents
