Strauss water Bubble PLUS User manual

User Guide

2

3
The CO2Cylinder
The disposable CO2cylinder is produced from recyclable materials in accordance with the
sustainability and environment protection standards.
It is recommended to deliver the used cylinders to electronic waste collection points.
The Company is responsible for the proper operation of the gas cylinder under the following
conditions:
•
The CO2cylinder contains compressed carbon dioxide ( CO2 ).
• Do not expose the
CO2cylinder to temperatures above 50
0
Celsius or to direct sunlight.
• Do not expose the cylinder to fire.
• Do not pierce, dismantle or tamper with the
CO2cylinder in any way.
• Do not remove the
CO2cylinder from the water bar during the sparkling operation and
until the cylinder is empty.
• When performing maintenance on the water bar, cylinder removal will be performed only
by a qualified technician of the Company.
• Do not remove the
CO2cylinder from the water bar before emptying it, as this may
produce a loud noise and frostbite.
The
CO2cylinder is protected from being filled by unauthorized parties and the Company will
only be responsible for the safety and soundness of cylinders filled by authorized parties that
carry the Company’s safety stamp.

4
User Guide
Welcome to Strauss Water, your purchase of the water bar enables you and your family
to enjoy tasty and quality water; hot, cold, and sparkling water exactly the way you like it.
Why should I read it?
The following user guide is the shortest and best way to get to familiarize yourself with your
new water bar.
The user guide explains and answers most of the questions that may arise during the use of
the water bar.
How to contact us.
If you have an issue or a question to which you have not found an answer in the guide, you
are welcome to visit our website at www.strauss-water.com from a computer or mobile
device. The website will provide quick response using our chat service, on-site technician
visits, and personal service providing information regarding your personal account.
We have ensured that the product you have complies with the strictest international
standards so that you and your family can enjoy clear quality water. Therefore we recommend
that you dispense a cup of water, clear or sparkling, and enjoy.
Strauss Water

Our products comply with strict Israeli and international standards in order to
guarantee that your family and you will enjoy high quality and safe water.
The Strauss Water Company hereby declares that the water bar complies
with Israeli and international standards for use in a food/drinking water
environment as well as electrical safety.
Standard Mark 1505 - Systems Handling Drinking Water for Home
Use - Filtration and Purification:
Odor and taste removal - level 1 chlorine reducer (at least 75%)
The system reduces the water bacterial load
Removes particles 2 microns and above
Safety Mark 5452 - defines testing of product that come in contact
with drinking water
European standard for electrical products safety
Strauss Water Co. Israel and its quality system have been certified according to
international standard ISO9001:2008.
Avishay Shapira
Quality Manager
Strauss Water
Manufacturer Compatibility Certificate

6
Table of Contents
1. Overview..................................................................................................................................... 9
2. Operation/Control Panel.................................................................................................10
3. Water Bar Operation ..........................................................................................................11
a. Dispensing Cold Water .......................................................................................................................................11
b. Dispensing a Measured Quantity of Cold Water ...............................................................................11
c. Dispensing Mixed Water.....................................................................................................................................11
d. Dispensing Hot Water ........................................................................................................................................12
e. Dispensing a Measured Quantity of Hot Water...................................................................................12
f. Dispensing Water with Child Lock ...............................................................................................................13
g. Boiling the Water....................................................................................................................................................13
h. Dispensing a Jug of Cold Water....................................................................................................................13
3.f 13
i. Dispensing a Cup of Sparkling Water..........................................................................................................14
j. Dispensing a Cup of Strong Sparkling Water..........................................................................................14
k. Dispensing a Cup of Light Sparkling Water............................................................................................ 14
l. Dispensing a Jug of Sparkling Water ...........................................................................................................15
m. Keypad Lock............................................................................................................................................................. 15
4. Preferences Menu Actions.............................................................................................16
a. Defining a Measured Quantity.......................................................................................................................16
a.1. Setting the Quantity for Dispensing Cold Water............................................................................. 16
a.2. Setting the Quantity for Dispensing Mixed Water......................................................................... 17
a.3. Setting the Quantity for Dispensing Hot Water...............................................................................17
a.4. Setting the Quantity for Dispensing a Jug of Cold Water.......................................................... 18
a.5. Setting the Quantity for Dispensing a Jug of Sparkling Water...............................................19
b. Setting Water Temperature..............................................................................................................................19
b.1. Setting Cold Water Temperature .............................................................................................................. 19
b.2. Setting Mixedm Water Temperature ...................................................................................................... 20
b.3. Setting Hot Water Temperature.................................................................................................................20
c. Sparkling Levels Adjustment...........................................................................................................................20
d. Automatic Heating................................................................................................................................................ 21
d.1. Smart Heating....................................................................................................................................................... 21
d.2. Wakeup..................................................................................................................................................................... 22

7
Table of Contents
5. Actions in the Settings Menu ......................................................................................23
a. Clock ............................................................................................................................................................................... 23
a.1. Time & Day Adjustment..................................................................................................................................23
a.2. Setting Clock Format........................................................................................................................................23
a.3. Clock Display.......................................................................................................................................................... 24
b. Child Lock Mechanism ......................................................................................................................................24
c. Keypad Sound ..........................................................................................................................................................25
d. Language Setting...................................................................................................................................................25
6. Water Bar Maintenance & Periodic Care................................................................26
a. Emptying the Drip Tray .......................................................................................................................................26
b. Filter and UV Lamp Replacement................................................................................................................ 26
c. Filter Replacement Instructions.....................................................................................................................26
d. Displaying and Resetting the Filter Replacement Timer ...............................................................27
e. Lamp Replacement Instructions................................................................................................................... 27
f. Displaying and Resetting the UV Lamp Replacement Timer .......................................................28
g. Washing Tanks..........................................................................................................................................................28
h. CO2cylinder content............................................................................................................................................ 29
i. Internal Cleaning......................................................................................................................................................29
j. Maintenance After a Prolonged Period of Time.................................................................................... 29
k. Initialization ................................................................................................................................................................30
k.1. Restoring Factory Settings ............................................................................................................................ 30
k.2. Smart Heating Reset ......................................................................................................................................... 31
l. Energy Saving Mode..............................................................................................................................................31
l.1. Turning On Energy Saving Mode ...............................................................................................................31
m. Turn Off Mode.........................................................................................................................................................32
7. Replacement Date for the CO2Cylinder...............................................................33
8. Replacing the CO2Cylinder..........................................................................................34
9. Cleaning the Water Bar ....................................................................................................36
10. Safety Warnings .................................................................................................................37
11. Technical Specifications................................................................................................38
12. Troubleshooting................................................................................................................39
14. Service and Warranty Options..................................................................................41

8

9
1. Overview
2 Top cover
3 Operation panel with
digital display
4 Dispensing spout
6 Folding tray
7 Drip tray
8 Ventilation vents
9 Electricity cable and
heating switch
11 CO2cylinder housing
10 Water entry
5 Folding tray bars
1 CO2cylinder cover

10
2. Operation/Control Panel
1. Measured quantity of mix water dispensing button
2. Extra hot - boiling button
3. Boiling control light (blinks until boiling has been completed)
4. Hot water dispensing button
5. Digital display
6. Boiling progress bar - when boiling temperature has been achieved, is
replaced with extra hot water icon
7. Wakeup / smart heating icon (appears when option is on)
8. Child lock icon (appears when the option is on)
9. Cold water dispensing button
10. Additional dispensing options button (short press) and settings / preferences
menu (long press)
11. Sparkling cup of water dispensing button
12. Cylinder emptying progress bar - appears when starting CO2emptying until
the process is complete
13. The CO2cylinder icon (appears when the CO2cylinder is empty or no cylinder
is present or when it is not screwed-in all the way)
14. Clock
Please note! The above display is for illustration purposes only.
2
1314
3
11
10
1
4 75
9
8
12
6

11
3. Water Bar Operation
a. Dispensing Cold Water
To dispense cold water, press the marked top right button. Dispensing will
continue while the button is pressed. Please note that continuous dispensing is
limited to 4 minutes.
b. Dispensing a Measured Quantity of Cold Water
To dispense a measured quantity of cold water, briefly press the marked top
right button. Pressing any button during dispensing will stop the action.
c. Dispensing Mixed Water
Mixed water is a mixture of cold water filtered and purified by UV and hot water.
To dispense a measured quantity of warm water at a set temperature, briefly
press the bottom left button. Pressing any button during dispensing will stop
the action.
When child lock is on, it is necessary to press the marked bottom left button
and also briefly press the marked top right button. It is not necessary to
continue pressing the top right button during dispensing.
Caution! The mixed water is dispensed from 2 different nozzles. When
dispensing into a narrow neck bottle, use a funnel, or first dispense into a wide
neck jug.
Note: When the hot water temperature is low, the mixed water cup on the
display will be dimmed and dispensing will not be possible. When pressing the
mixed water button, the hot water progress bar will advance, the water will
start to heat until it reaches the dispensing temperature. When the dispensing
temperature is reached, the color of the hot and mixed cups on the display will
fill up.
PRESS ANY KEY TO STOP

12
*Please note! Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity
was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
d. Dispensing Hot Water
To dispense hot water, press the marked top right button.
The dispensing will continue while the button is pressed.
Note: When the hot water temperature is low, the hot water cup on the
display will be dimmed and dispensing will not be possible. When pressing
the hot water button, the hot water progress bar will advance, the water will
start to heat until it reaches the dispensing temperature. When the dispensing
temperature is reached, the color of the hot cup on the display will fill up.
e. Dispensing a Measured Quantity of Hot Water
To dispense a measured quantity of hot water, briefly press the marked top left
button.
Pressing any button during dispensing will stop the action. It is not possible to
dispense a measured amount of hot water when child lock is on.
Note: The dispensing a measured quantity of hot water function can be
canceled.
*Please note! Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
PRESS ANY KEY TO STOP

13
f. Dispensing Water with Child Lock
To dispense hot water with child lock it is necessary to simultaneously press the
marked top left button and also briefly press the marked top right button. The
dispensing will continue as long as the top left button is pressed. There is no
need to continue pressing the top right button during dispensing.
Hot Water Dispensing with Child Lock will Always be Accompanied by a Beep.
g. Boiling the Water
To heat the water to a temperature close to boiling, press the marked left button.
When the button is pressed, the progress bar above the hot water cup will
advance, the water will be heated until it is near boiling, and the LED above the
button will start blinking. When the temperature is near boiling, the color of
the hot water cup on the display will fill up and the steam icon above the hot
water cup will be displayed instead of the progress bar.
h. Dispensing a Jug of Cold Water
To dispense a jug of cold water, briefly press the menu button. After moving
to the next dispensing menu, press the marked right top button. Pressing any
button during dispensing will stop the action.

14
i. Dispensing a Cup of Sparkling Water
To dispense a cup of sparkling water, press the marked right bottom button.
Pressing any button during dispensing will stop the action. The water
bar is designed to provide a fixed quantity of sparkling water per cup. It
is recommended to wait until dispensing has completed. The set default
sparkling level of the home screen is regular, but the sparkling level can be
changed from MENU > SPARKLING LEVELS (see section "c. Sparkling Levels
Adjustment" on page 20).
Note that it is not possible to change the measured quantity of sparkling water.
The sparkling levels are defined using the following icons
Strong Regular Light
j. Dispensing a Cup of Strong Sparkling Water
To dispense a cup of strong sparkling water, briefly press the menu button.
After moving to the next dispensing menu, briefly press the marked bottom
left button.
k. Dispensing a Cup of Light Sparkling Water
To dispense a cup of light sparkling water, briefly press the menu button. After
moving to the next dispensing menu, briefly press the marked top left button.

15
l. Dispensing a Jug of Sparkling Water
To dispense a jug of sparkling water, briefly press the menu button. After
moving to the next dispensing menu, briefly press the marked bottom right
button.
The default number of cups to be continuously dispensed into a jug is 5.
The setting can be changed to 2-7 cups (see section "a.5. Setting the Quantity
for Dispensing a Jug of Sparkling Water" on page 19).
m. Keypad Lock
This option enables locking all the water bar keys so that dispensing water
and using the menus are disabled. When the function is on, the icon will
permanently appear on the display. To lock and unlock the water bar keys,
simultaneously press the buttons and for a few seconds.
*Please note! Before cleaning the touch screen and replacing the CO2cylinder, turn on this option to avoid
unwanted water dispensing during the cleaning.

16
4. Preferences Menu Actions
The menu enables changing general water bar settings and customizing
settings. To enter the menu press button no. 1 for a few seconds.
Navigating the different menu options is performed using buttons no. 2 & 3.
Selecting an option is performed by pressing button no. 4.
To exit the selected option, press button no. 5.
*Please note! If the water bar's setting menu has not been accessed within 15 days of installation, a
message will be displayed on the water bar to remind the user that customization options are available.
a. Defining a Measured Quantity
To set the measured quantity for dispensing, enter the DEFINE QUANTITY sub
menu.
MENU PREFERENCES DEFINE QUANTITY
a.1. Setting the Quantity for Dispensing Cold Water
This option enables setting the quantity of cold water that will be dispensed
when briefly pressing the cold water button. To adjust the measured quantity,
enter the DEFINE QUANTITY sub menu.
MENU PREFERENCES DEFINE QUANTITY COLD CUP
Press the button . Place a cup beneath the dispensing spout and press the
button for a few seconds (the longer the press, the larger the set quantity
of water).
To confirm the action, press the button (a beep will sound).
Notes: (1) You can set a water quantity of 0-300 ml.
(2) To cancel the set quantity of cold water measured cup, briefly press the
button in the DEFINE QUNATITY COLD CUP screen.
1
24
35
MENU
PREFERENCES
SETTINGS
MAINTENANCE
ENERGY SAVING
SHUT DOWN
PREFERENCES
DEFINE QUANTITY
DEFINE TEMPERATURE
SPARKLING LEVELS
AUTOMATIC HEATING

17
a.2. Setting the Quantity for Dispensing Mixed Water
This option enables setting the quantity of mixed water that will be dispensed
when briefly pressing the mixed water button. To adjust the measured quantity,
enter the DEFINE QUANTITY sub menu.
MENU PREFERENCES DEFINE QUANTITY MIX CUP
Press the button . Place a cup beneath the dispensing spout and press the
button for a few seconds (the longer the press, the larger the set quantity
of water).
To confirm the action, press the button (a beep will sound).
Notes:
(1) You can set a water quantity of 0-300 ml.
(2) To cancel the set quantity of mixed water measured cup, briefly press the
button in the DEFINE QUNATITY MIX CUP screen.
a.3. Setting the Quantity for Dispensing Hot Water
This option enables setting the quantity of hot water that will be dispensed
when briefly pressing the hot water button. To adjust the measured quantity,
enter the DEFINE QUANTITY sub menu.
MENU PREFERENCES DEFINE QUANTITY HOT CUP
Press the button . Place a cup beneath the dispensing spout and press the
button for a few seconds. (The longer the press, the larger the set quantity
of water).
To confirm the action, press the button (a beep will sound).
COLD CUP
Recording...
Release OK to Stop
COLD CUP
Place a cup on the tray.
Press and hold the
OK button to
start Recording
MIX CUP
Place a cup on the tray.
Press and hold the
OK button to
start Recording
MIX CUP
Recording...
Release OK to Stop

18
Notes: (1) You can set a water quantity of 0-300 ml.
(2) It is not possible to dispense a measured amount of hot water
when child lock is on.
(3) To cancel the set quantity of hot water measured cup, briefly press the
button in the DEFINE QUANTITY HOT CUP screen.
a.4. Setting the Quantity for Dispensing a Jug of Cold Water
This option enables setting the quantity of a jug of cold water that will be
dispensed when briefly pressing the cold water button. To adjust the measured
quantity, enter the DEFINE QUANTITY sub menu.
MENU PREFERENCES DEFINE QUANTITY COLD JUG
Press the button . Place a jug beneath the dispensing spout and press the
for a few seconds. (The longer the press, the larger the set quantity of water).
To confirm the action, press the button (a beep will sound).
Note: The set water quantity can be 0-1,000 ml.
*Please note! Due to variations in the water flow rate, the set quantity may
vary. After dispensing it is important to check that the required quantity was
received (especially when preparing food for infants, medications etc.). In the
event of quantity variations, the required quantity can be redefined.
HOT CUP
Place a cup on the tray.
Press and hold the
OK button to
start Recording
HOT CUP
Recording...
Release OK to Stop
COLD JUG
Recording...
Release OK to Stop
COLD JUG
Place a jug under the
faucet.
Press and hold the
OK button to
start Recording

19
a.5. Setting the Quantity for Dispensing a Jug of Sparkling Water
This option enables setting the quantity of a jug of sparkling water that will be
dispensed when briefly pressing the jug of sparkling water button. To adjust the
measured quantity, enter the DEFINE QUANTITY sub menu.
MENU PREFERENCES DEFINE QUANTITY SPARKLING JUG
Press the button . Select 2-7 cups of sparkling water. The quantity dispensed
when pressing jug of sparkling water will contain a continuous dispensing of
the number for cups defined (each cup contains 200 ml of sparkling water).
To confirm the action, press the button (a beep will sound while pressing).
The default quantity for a jug of sparkling water is 5 cups (1 liter).
תוסוכ 2
תוסוכ 3
תוסוכ 4
תוסוכ 5
תוסוכ 6
תוסוכ 7
םיזגומ םימ ןקנק
SPARKLING JUG
2 CUPS
3 CUPS
4 CUPS
5 CUPS
6 CUPS
7 CUPS
b. Setting Water Temperature
To set the temperature of the water dispensed, enter the DEFINE TEMPERATURE
sub menu.
MENU PREFERENCES DEFINE TEMPERATURE
b.1. Setting Cold Water Temperature
This option enables setting the required cold water temperature
(cold or very cold).
To set the temperature, enter the DEFINE TEMPERATURE sub menu:
MENU PREFERENCES DEFINE TEMPERATURE COLD WATER
To change the temperature, use the top right and bottom right buttons.
To confirm, press the button.
COLD
COLDEST
COLD

20
b.2. Setting Mixedm Water Temperature
The option enables setting the required mixed water temperature. To set the
temperature, enter the DEFINE TEMPERATURE sub menu:
MENU PREFERENCES DEFINE TEMPERATURE MIX WATER
To change the temperature, use the top right and bottom right buttons.
To confirm, press the button.
b.3. Setting Hot Water Temperature
The option enables setting the required hot water temperature (hot or very
hot). To set the temperature, enter the DEFINE TEMPERATURE sub menu:
MENU PREFERENCES DEFINE TEMPERATURE HOT WATER
To change the temperature, use the top right and bottom right buttons.
To confirm, press the button.
c. Sparkling Levels Adjustment
This option enables selecting the sparkling level of the sparkling water cup that
appears on the home screen. The sparkling level selected will be represented
by the number of bubbles that appear in the sparkling water cup on the home
screen.
HOTTEST
HOT
HOT
HOT
COLD
MIX