Streamax X7PRO-H0808 User manual

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
1-12
User Manual
For
X7 PRO-H0808
Mobile Network Video Recorder

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
2-12
Notice
The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without any
notice.
The purpose of this manual is to kindly aid the user for the operation for our MDVR. The user
should have a basic understanding of computer operation and basic knowledge of how to connect
peripherals and make some settings.
Copyright
Under copyright laws, the content of this manual may not be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine- readable form, in whole or in part,
without prior written consent of Streamax Technology Co., Ltd.

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
3- 12
Guarantee & Warnings
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
2) Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent
vibration, impact and water splashing.
3) Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily
press the equipment before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified technicians and
engineers. We do not undertake any responsibility caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight,
flammable or explosive substances, etc. Keep gaps not less than 3cm around the device to
facilitate ventilation for cooling.
6) Accessories
Make sure to use accessories from the manufacturer recommended in the attachment.
Insulate circuit ground and metal shell for all the peripherals.
Before installation, please open the package and ensure that all parts are included.
If there are any problems, please contact us as soon as possible.

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
4- 12
1．Product characteristics
1.1. Overview
Streamax Mobile NVR X7PRO-H0808 is a multi-functional extensive device specially designed for
mobile video surveillance system. It adopts high speed processor and built-in operating system,
combining with H. 265 video compression / decompression technology, 4G/3G network technology,
GPS locating technology and WIFI technology. It can realize 1080P and 720P high definition. With
center software, it also achieves alarm linkage central monitoring, remote management and
playback analysis. It is powerful with strong anti-vibration, anti-electromagnetic interference,
compact size, flexible installation, 3.5 inch hard disk storage, SD card backup design, easy
maintenance and high reliability.
1.2. Features
The most advanced H.265 video compression/decompression technology in the IT field;
4G/3G network technology, GPS positioning technology, WIFI technology (module pluggable);
Support 1080P/720P resolution recording;
Support VGA/CVBS heterogeneous video output;
Support 20-26.1mm hard disk, hard disk heating and hard disk power failure protection
technology;
E-MARK, CE, FCC certified, comply with the standard of US military standard:
MIL-STD-810G;
Support remote wakeup and IO wakeup;
Support fire proof box access;
Support Easy Check (parameter configuration and maintenance);
Support Gigabit Ethernet port.

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
5- 12
1.3. Specifications
Items
Technical Index
Function Overview
Preview, recording, playback, network, locating
System
OS
Linux 3.18.20
Control Mode
CP4, Easy Check, network(3G/4G/WIFI) and mouse
Video
Input
8 channels IPC+8 channels AHD
Output
1 channel CVBS; 1 channel VGA
(supports 1080P backward compatible with 720P)
Total Resource
PAL:
8x720P@25fps(AHD)+8x1080P@30fps(IPC)
Or 8x1080P@10fps(AHD)+8x1080P@30fps(IPC)
NTSC :
8x720P@30fps(AHD)+8x1080P@30fps(IPC)
Or 8x1080P@15fps(AHD)+8x1080P@30fps(IPC)
Audio
Input
8 channels
Output
2 channels
Display
Display Split
1/4/9 Image display
OSD
Locating, alarm, license plate, speed and date/time
Operation Interface
Graphical user interface
Recording
Video/Audio
Compression
Video:H.265/H.264
Audio: ADPCM, G.711U
Image Resolution
PAL:
1080P,720P,WD1(928X576),WHD1(928X288),
WCIF(464X288),D1(704X576),HD1(704x288),
CIF(352x288);
NTSC:
1080P,720P,WD1(928X480),WHD1(928X240),
WCIF(464X240),D1(704x480),HD1(704x240),
CIF(352x240);
Digital:
1080P(1920X1080),720P(1280X720).
Image Quality
8 levels adjustable (1 is the best)
Recording Mode
Boots up/schedule/alarm event recording
Pre-recording
0-60 minutes
Post-recording
0-30 minutes
Playback
Playback Channel
Local: supports 1/4/9 channels (single channel main
stream, multi-channel sub stream)
WEB: supports 1/4/9 channel synchronous playback
Search Mode
Date/time, channel, event

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
6- 12
Network
Wire
LAN:1000M/100M(RJ45 without light)
WAN:1000M/100M(RJ45 without light)
Wireless
WIFI: supports 802.11b/g/n/ac
3G/4G: Supports one (support remote wake-up)
Locating
GPS
Location tracking, speed detection and time sync
Sensor
G- Sensor
Built-in six -axis inertia sensor
Storage
HDD/SSD
1 x3.5 "SATA HDD
Compatible with 20 ~ 26.1mm, supports hard disk
heating
SD card
Supports SDXC 32GB /64GB/128GB/256GB,
Hot-plugging
Interface
USB
1 x USB2.0 (Type A) + 1 x USB2.0 (Type B)
eSATA
1 x eSATA
SD
1 x SD card slot
SIM
1 x PUSH-PUSH SIM card slot
Serial interface
2 x RS232, 2 x RS485
CAN
2 x CAN
Sensor
8 inputs, 2 outputs
Pulse Speed
Detection
1 channel
Control panel
CP4
Intercommunication
One MIC port (CP4)
Power
Input
DC8-36V
Output
5V@500mA & 12V@500mA
Max. power
consumption
85W
Standby power
consumption
≈0W
Physical
Characteristic
Dimension
(L x W x H)
362.4x 254 x 127mm (with rear cover and shelves)
Operating
Environment
Temperature
-40℃~+70℃(with heating and no HDD)
Relative Humidity
8%~90%

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
7- 12
1.4. External Interface
Dimension (Unit: mm)
Front Panel

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
8- 12
Rear Panel
No.
Print
Description
1
Power
DC8-36V power input
2
Serial
Serial interface
3
Sensor
Sensor interface
4
VGA
VGA video interface
5
eSATA
eSATA interface
6
Panel
Control Panel (CP4) interface
7
3G / 4G antenna interface
8
WIFI antenna interface
9
GPS antenna interface
10
Print serial interface
11
USB
USB 2.0 interface (type-B)
12
A/V IN 1~8
AHD interfaces 1 to 8
13
IPC 1~8
IPC interfaces 1 to 8
14
WAN/LAN
RJ45 (10/100/1000M) network port

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
9- 12
1.5. HARD DISK INSTALLATION INSTRUCTION
1.6. System diagram

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
10 - 12
1.7. External cable interface definition

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
11 - 12
2．FAQ
1) The system can’t start?
Usually this problem results from the incorrect power connection. Please follow below steps to
check the power connection:
1. Check the input power, whether the power wire is connected correctly, whether the ground wire
is connected back to the battery, and whether the fuse on the power wire is in good condition.
2. Check whether the ACC signal wire input to the power is with voltage higher than 7.5 V.
3. Check whether the device key is closed.
2) The MDVR restarts uninterruptedly?
Please follow below steps to check it:
1. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up
voltage of the device, the device would always restart.
2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and
check whether it is broken down.
3) The device can’t record?
Usually this problem results from the storage disk or camera. Please follow below steps to
check it:
1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk
can be read normally in computer.
2. Check whether the storage disk is formatted. The storage disk should be formatted before
normally storing record files.
3. Check whether there is video signal input into the device from camera, and whether there is
video/image on the screen.
4) There is no voice in record file?
Please follow below steps to check it:
1. Check whether there is an external pickup, or whether the camera features with the function of
audio collection.

User Manual for X7 SE -H0808
For more information, please visit our website www.en.streamax.com
12 - 12
2. Access to Video Channel Settings, check if Audio is set on.
3. There must be video input into the channel for recording and it must record normally.
5) The GPS works abnormally?
Please follow below steps to check it:
1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS
antenna holder behind the host device.
2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which
may cause it not to receive signals.
3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or
elevated roads, thunderstorms or other weather influence, etc. can also cause signal loss or
receiving wrong signals.
6) The device can’t shutdown in ignition switch mode?
1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACC
yellow line when the key is turned off.
2. If the device has been set with schedule recording, it can’t shutdown if it is still during
recording time of the task table.