STRUMENTO MARINO Mijota JS00 User manual

User Manual
Japan Miyota JS00 - JS10 - JS50 - JS55
ref.code SM131 - SM132
STRUMENTOMARINO.IT

21
Set the time
Regular Position
Stopwatch minute hand
Stopwatch second hand
24H hands
Button A start/stop
Button B
reset
Crown
BATTERY : SR621SW
BATTERY LIFE : 2 YEARS

STOPWATCH FUNCTION : SMALL SECOND HAND TIME
MEASUREMENT UP TO 29min 59sec
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) USING THE STOPWATCH
D) STOPWATCH RESET (INC. AFTER REPLACING BATTERY )
A) DISPLAYS AND BUTTONS
Stopwatch
minute hand
Hour hand
NORMAL
Second hand
B) SETTING THE TIME
1. Pull the crown out to the second position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the first position in
synchronization with a time signal, second hand begins to
run.
C) USING THE STOPWATCH
This stopwatch is able to measure and display time in
1second united up to maximum of 29min 59sec.
Stopwatch will stop automatically after running continuously
for 30 minutes

Measuring time with the stopwatch
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time
button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch
minute and second hands return to their ZERO positions.
* Button A / B does not function during resetting the
stopwatch.
Reset
D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch
second hand does not return to the ZERO second position
after the stopwatch has been reset, and including after the
battery has been replaced.
1. Pull the crown out to the second position.
2. Press button "A" to set the stop watch second hand to the
ZERO position.
*The stopwatch minute hand is syncronized with
stopwatch second hand.
*The stop watch second hand can be advanced rapidly by
continuously pressing button "A".
3. Once the hands have been zeroed, reset the time and
return the crown to first position