Suiden SS-22DD-8A User manual

MANUAL NO: SS-22DD, ED-8A 1006
INSTRUCTION MANUAL
1. For your safety! ................................................. 1
2. Product specication .......................................... 2
3. Parts .................................................................. 3
4. Setup ................................................................. 4
• Placing the unit ............................................. 4
• Attaching the cool air duct ............................ 4
• Attaching the hot air exhaust duct ................ 5
• (Optional) Exhaust air duct extension ........... 5
• (Optional) Cool air duct extension ................ 6
• Connecting to a power source ...................... 7
• Trial operation ............................................... 7
5. How to use ........................................................ 8
• Operating the unit ......................................... 8
• Adjusting the direction of airow ................... 8
• The swivel function ....................................... 9
• The drain tank ............................................... 9
6. Safety devices .................................................. 10
7. Maintenance and storage ................................... 11
• Cleaning the lter .......................................... 11
• External maintenance ................................... 11
• Before storing the unit .................................. 12
8. Safety inspection ............................................... 12
9. Troubleshooting ................................................. 13
10. After service ...................................................... 14
Index
Thank you for purchasing this product from the
world brand SUIDEN. Please use this product
correctly after having thoroughly read this manu-
al. After having nished reading, please store it in
a place where it is easily accessed by people using
the unit. If during use the unit malfunctions, or if
something is unclear, please consult this manual.
Be sure to thoroughly read this manual to the end
before commencing operation of the unit. Please
also store this instruction manual in a place where it can
be accessed by anyone who needs it at all times.
SS-22DD-8A
AutomAtic swivel MINI DRAIN
∆ Note:
Do not use the unit in places with gases or vapour contain-
ing hydrochloric acid, sulphuric acid, or any other corrosive
substances.
SPOT
COOLER
(220V / 50Hz) SS-22ED-8A
mAnuAl swivel MINI DRAIN

1
1For your safety!
Please do not operate the unit before carefully reading and understanding the content of this section. The items
treated in this section are to ensure safe use of the unit and to beforehand prevent harm or injury to you and others.
Further, to clarify the severity of the harm and injuries that can result from incorrect use, the items in this section are
divided into two categories; Warnings and Caution. However, since the actions explained under caution also some-
times can cause severe harm, please follow all instructions in this section carefully regardless of category.
Warning:
Caution:
∆ Note:
Incorrect use can cause death or severe injury.
Incorrect use can cause bodily harm or can damage the unit.
Additional useful information other than warnings and caution.
Carrying / Moving the unit
Caution
When packing the unit into and out of a vehicle, be
sure to be 2 or more people to ensure safe opera-
tion.
*If the unit is dropped, there is risk of
physical injury and damage to the unit.
If the unit is transported in a vehicle after it is un-
packed, be sure to fasten it thoroughly with a rope
or a strap.
*If unfastened the unit can move unexpect-
edly and cause an accident.
When carrying, or moving the unit in any other way, please keep it balanced and adapt your movement to the
shape and weight of the unit at all time.
*If the unit is dropped, there is a risk of injury and other accidents.
General caution
Caution
Do not use the unit in any other way than is de-
scribed in this manual.
*Incorrect use can cause electric shock,
short circuit, water leakage and other ac-
cidents, as well as can damage the unit.
Do not use the unit on ships or in vehicles.
*Use on ships or in vehicles can result in
water leakage and a short circuit.
Testing and operating the unit
Warning
Please do not use the unit close to kerosene,
gasoline, thinner, ether, paints or other ammable or
explosive objects.
*This can result in fire or explosion.
Do not use the unit close to dust, gas or steam
containing aluminium, magnesium, titanium or other
ammable substances.
*This can result in fire or explosion.
Do not put wet hands on the plug, the switch or the
electric wires.
*This can cause electric shock and injury.
Use a 20A rated electrical outlet. Do not plug in any
other electrical appliance in the same outlet.
*If other appliances are connected in the
same outlet at the same time, the outlet
can overheat and catch fire.
Do not expose to water or oil.
*Water or oil can cause a short circuit,
electric shock and other accidents.
Earth the unit securely, and use a earth leakage
circuit breaker (bought separately).
*When the unit is broken or has a short cir-
cuit, there is risk of electric shock.
Caution
If the unit is not working properly, pull the plug im-
mediately and turn it in for service or repair.
*There is risk of electric shock or fire
caused by a short circuit.
Do not expose your body to the cold air from the unit
for an extended period of time.
*Prolonged exposure can harm your
health. Use the swivel function, or direct
the duct so it does not point directly at
you.
Do not use the unit in a place with dust that is harmful to the human body.
*If harmful dust sticks to the unit, there is risk of harmful dust dispersal when the unit is in
operation.
Do not use the unit in vibrating or shaking places, or
on slanting surfaces.
*The unit can unexpectedly move or fall,
causing accidents and injuries.
*Place the unit on a stabile level surface.
Do not use the unit in places where it is exposed to
water.
*Contact with water can damage the insu-
lation and cause electric shock, short cir-
cuit, fire and other accident and injuries.

2
2Product specification
Maintenance
Caution
All maintenance must be conducted while the unit is
unplugged.
*There is risk of electric shock and physi-
cal injuries.
Make sure that the unit is unplugged when in storage.
*There is risk of injury and electric shock.
Disassemble, repair and reassemble is not to be at-
tempted by anyone other than an authorized repair-
man/technician.
*Inadequate or poor handling can result in
fire, malfunction and injuries.
Do use electricity within the allowed range:
198V - 244V.
*There is risk of electric shock and short
circuit.
Do not use the unit in other than the stated opera-
tion conditions.
*Since there is risk of electric shock, short
circuit and malfunction, please use the
unit within the suitable range: 25º(50%
humidity) ~ 45º(40% humidity).
Do not use the unit in places with a lot of cutting oil
or mineral oil.
*They can cause the resin made parts of
the unit to deteriorate, which can result in
accidents and injuries.
Lock the caster wheels with the caster stoppers
before starting to operate the unit.
*The unit can start to move unexpectedly
and cause accidents and injuries.
Do not use in places with electrically conductive dust
from Iron, carbon, casting, aluminium etc.
*Electric shock or fire caused by a short
circuit can occur.
If you use the unit in a very dusty environment,
make sure to clean the interior of the unit regularly.
*Electric shock or fire caused by a short
circuit can occur.
Keep away from re.
*The unit can become deformed, causing
short circuit and possibly fire.
Do not put hands or ngers into the exhaust hole.
*There is risk of injury.
Do not use the unit if the cord or plug is damaged,
or if the plug is loose in the socket.
*Electric shock or fire caused by a short
circuit can occur.
If you use an extension cord, make sure to use one
that meets the specied requirements.
*There is risk of the cord overheating and
catching fire.
Do not let the plug get dirty or get exposed to metal
objects while plugged.
*There is risk of electric shock, short cir-
cuit and fire.
Do not put heavy objects onto the electric cord.
*If the cord gets damaged, there is risk of
electric shock and fire.
Do not use the extension cord while its is coiled or
bundled together.
*There is risk of the cord overheating and
catching fire.
*Make sure that the extension cord is ex-
tended before use.
Do not damage, process, nor bend, pull, twist or
bundle the cord excessively .
*If the cord gets damaged, there is risk of
electric shock or fire.
When you unplug the plug, be sure not to pull it by
the cord, but to pull it out holding the plug directly.
*There is risk of electric shock, short cir-
cuit and fire.
Remove the plug from the electric outlet when the
unit is not in use.
*There is risk of burning and other inju-
ries, electric shock, fire caused by short
circuit etc.
Model number SS-22DD-8A SS-22ED-8A
Automatic swivel Yes No
Power supply Single phase 220V / 50Hz
Cooling capacity 2.2kW
Compressor / output Air tight rotary model / 0,69kW output
Air
ow
Power output 200W
Cool air velocity 5,4m3/min (Strong) - 5,2m3/min (Weak)
Hot air velocity 9,8m3/min
Dimensions (mm) W 390 x D 430 x H 808 (Not including hot/cold air ducts)
Operating condition 25ºC (50%) - 45ºC (40%) Power factor 98%
Power consumption 0,80kW Net weight 37kg
Starting current 15,5A Running current 3,7A
Refrigerant HCFC-22 (R22) Refrigerant charge 320g
Power factor 96% Remarks All values are measured during operation in 35ºC / 60% humidity

3
3Parts
∆Note:
The service cover contains fuses. See
page 10 for more detailed information.
∆Note:
See page 7 for further information regarding
how to connect the unit to a power source.
∆Note:
Suitable for electric cords ≤ Ø 6,8mm. If you use cords thicker than 6,8mm,
you can not fasten them with the cord clamp attached to the unit. In that
case, please acquire a suitable cord clamp and use it instead.
Caster wheel with brake
Drain tank
Filter cover
Electric cord (earthed)
(2.0m, complete with plug)
Caster wheel
Earth terminal
Service box
Handle
Control panel
Filter (Interior part)
Filter extract handle
Cold air duct
Duct elbow
Hot air exhaust duct
Cord clamp
The exterior
The control panel
Airow velocity switch
You can choose weak (L) or
strong (H) airow.
Power switch
You can choose between
“Air“, “Cool” and “Stop”.
Cool air duct swivel switch
Attention! This switch is only in-
cluded in models with automatic
swivel. (Not SS-22ED-8A)
H
STOP
OFFL
ON
COOL
AIR
MODE TURN FAN

4
4Setup
Important: To ensure safety, read section one “ 1 For your safety!“ rst.
1. Placing the unit
Make sure that the unit is placed so that there is nothing blocking the front
side lter, the cool air duct or the hot air exhaust duct.
There is only an air inlet on the front side, and the only air outlets are on
the top, so the unit can be placed with the other sides directly against a
wall, in a corner or in any other conned space.
2. Attaching the cool air duct
(1) Attaching the duct elbow
I. Insert the duct elbow into the elbow holder, tting the attach-
ment notch to the black mark on the inside of the holder.
II. After you have inserted the duct elbow into the holder, fasten
it so does not come loose by turning it to either side.
∆ Note:
Make sure that the duct elbow is correctly inserted into the
holder. If the duct elbow is not attached evenly, reattach it
correctly.
(2) Attaching the cold air duct
I. Insert the cold air duct into the duct elbow, tting the attach-
ment peg on the duct to the attachment notch in the elbow,
then turn it to the right.
∆Be sure not to insert the end with the screws!
II. Point the duct in the direction you want the air to blow in, x-
ing the duct elbow with your other hand.
* Please see page 8 for more information.
(3) Removing the duct elbow
I. Remove the cool air duct from the elbow.
II. Turn the elbow until the attachment notch is aligned with the
insertion mark.
III. Remove the duct elbow by pulling it straight up from the
holder.
∆ Note: Do not use the unit in places containing hydrochloric acid, sulphuric acid or any other corroding gas or steam.
*There is risk of gas leak or deterioration of performance.
≥30cm
≥30cm
≥ 40cm
Insert
Duct elbow
insertion mark
(Black line)
Duct elbow
attachment notch
Filter
Duct elbow
Attachment notch
Attachment peg
Screw
Insertion mark
(Black line) Attachment
notch
Duct elbow