SUKKAHMART Hard Wall Aluminium 2x3m User manual

Hard Wall Aluminium Sukkah - 2x3m
Assembly Instructions
1
1. Your Sukkahmart Sukkah and / or Rain Roof
is intended for use in a protected garden or
yard. Do not install your Sukkah in an open
area which is exposed to high winds which
may blow your Sukkah over.
2. If you are installing a Sukkah in an open area,
we recommend that you use the Super
Sukkah ONLY.
SAFETY WARNING - Please read before use
3. Wherever you place your Sukkah, it is vital
that you anchor your Sukkah down so that
it cannot lift off the ground. If wind lifts the
Sukkah off the ground, the Sukkah may
collapse upon landing. This is especially
important when using a Sukkah Roof.
4. You can weigh your Sukkah down, by
placing sandbags or heavy objects on the
bottom horizontal beam, or, for a Hard-
Walled Sukkah on the anchoring brackets
supplied. The Hard-Walled Sukkah also
comes with adaptors which can be used
to tie-down the Sukkah, or to fix the
Sukkah to your house.

Hard Wall Aluminium Sukkah - 2x3m
Assembly Instructions
Door Beams and Panels (put these aside for your door)
Hinge Beams (2 beams joined together with hinges) - 1
Handle Beam (beam with handle and latch on) - 1
Hook Beam (beam with hook for latch on) - 1
Door Crossbeams (white sticker) - 3
Under Door Support Bracket (pink sticker) -1
White Panel with red sticker (top panel) -1
White Panel with green sticker (bottom panel) -1
The basic Sukkah kit is 2x3 Meters with a door and a window. Any size larger than this
will come with separate 'extension' kits of 2 x 1 running meters or 2 x 2 running meters.
VERY IMPORTANT
The beams and panels are different sizes and it is crucial that you use the correct
beams and panels in the correct places. The beams and panels are marked with
colour stickers and it is essential that you follow this guide.
Supporting Beams (install once Sukkah is up)
2 Meter Crossbeam (pink sticker) - 2
1 Meter Crossbeam (pink sticker) - 2
500cm Top Corner Support (pink sticker) - 4
300cm Anchoring Bracket (pink sticker) - 2
Tie Down/ Wall Fixing Adapter - 4
Cross Beam Joiner (pink sticker) - 0
Other Beams in Kit
4-slot Upright Beam (green sticker) - 4
2-slot Upright Beams (black sticker) - 4
2 Meter Crossbeam (blue sticker) - 4
1 Meter Crossbeam (yellow sticker) - 10
2 Meter Crossbeam (grey sticker) - 4
1 Meter Crossbeam (grey sticker) - 2
White Panel (with orange sticker) - 17
Clear panel (with orange sticker) - 1
Basic Sukkah Kit 2x3 Contents
2

2 Meter wall
3 Meter Wall
Door beams and panels – (put these aside for your door)
Hinge Beams (2 beams joined together with hinges) - 1
Handle Beam (beam with handle and latch on) - 1
Hook Beam (beam with hook for latch on) - 1
Door Crossbeams (white sticker) - 3
Sukkah Elements Door (do NOT construct these yet)
3

How the beams join together
Inset the lock into the slot
Ensure they are flush against each other
Use the supplied tool to turn the bolt
The lock will lock the beam in place.
To build a 2x3 Sukkah
Step 1 - Start with the bottom and upright beams first.
NB - Ensure that both
sides of the hinges
are facing outwards
as in this picture.
Under Door Support Bracket
4
Unscrew foot to attach
“Under Door Support Bracket”
and reattach with foot.

Step 2 – Insert the first row of panels into the slots
Pic 2 – 2 slot upright
Pic 1 – Panel going in
On a 2 meter wall, use a 2-slot
upright beam between
the two panels
NB: Panels are not exactly square.
Make sure you insert the panels
long side up.
5

Step 4 – To complete the door, place the white panel with the green sticker
at the bottom, a 1 meter crossbeam on top of it, followed by the white panel
with the red sticker and another 1 meter crossbeam.
Step 3 – Place a crossbeam on top
of the panel, insert a second
panel on top of the crossbeam
and close the top off with a
1 or 2 meter crossbeam.
Leave a gap for your window.
Door Closed Door Open
6
Step 5 – Place the window in whichever panel you want it to be.
Under Door Support Bracket
Under Door Support Bracket

2m x 3m ARIAL VIEW
50cm
3m
2m
Step 6 – Place top supports ontop of your Sukkah for added strength (Pink Stickers).

Place a sandbag or
heavy item ontop of foot
Sandbag over
a foot
Use Rings
to fix to wall
or tie down
Upright Pole
Foot
8
Step 7 – Use remaining supports to anchor your sukkah.