Sungworld SW-E102 User manual

1
About your portable computer
Congratulation you on purchasing this new style of specialized multimedia
portable computer! This calculator has the most formidable function, the
conformity has written down the computer industry newest technology. Not only
this new set can use the present multimedia application procedure but also can
coordinate the outstanding new software in the future. This specialty multimedia
computer with elasticity function, and the probability, is a long run demand pc set
for the users.
UMPC user’s note
 To adjust the most clearly display
angle, to avoid reflective of the strong sun
light or darkness environment when using
the UMPC.
 To maintain the posture of nape
vertical
 To allow the use of the wrist
support-board, no forced Hit on the
keyboard, hands remain relaxed posture
 Relax your wrists, shoulder and neck
after using a certain period of time
 As far as possible choose
back-support chair, sit straight, thighs parallel with the floor, feet naturally set on
the floor
Uses the UMPC matters needing attention
⊙Do not use your fingers or hard objects (for example, things like stationery) to
touch the screen, or extrusion, as it will be likely to damage the screen
⊙Avoid dusty environment, dirty environment or dust may caused UMPC
operation failure
⊙Do not put the UMPC instability to avoid damage.
⊙Do not put heavy objects on the UMPC (for example, books, and other items), to
avoid crushing
⊙Do not expos the UMPC directly to sunlight to avoid heat damage
⊙Do not put UMPC around magnetic objects to avoid effects of the magnetic field
caused disk data loss

2
⊙ Avoid water leaching on UMPC or exposing to moisture
⊙Do not use UMPC in the cold (0 ℃ or 30 ℉ below) or overheating (50 ℃ or 122
℉ above), so may result UMPC operation failure.
⊙Do not put battery near the source of ignition or through into fire to prevent
explosions, support for the recycling of waste battery
Users guide
Welcome to read professional multimedia UMPC
users guide, the guide tells you cover from learning to
use the UMPC to understand all the issues. This guide
assumes that you have already known DOS, Windows,
the basic concept of the PC. You can start using this UMPC to do
many interesting things and important work.
This guide was divided into 7 chapters.
Chapter 1. Introduction of this UMPC.
Chapter 2. Provides step-by-step to help you start using this UMPC as soon as
possible.
Chapter 3. How to operate a standard feature of this UMPC.
Chapter 4 .Describe how to integrate audio and voice chip, provides an
impressive display.
Chapter 5. How to connect external devices with UMPC.
Chapter 6. How to use the system BIOS setup.
Chapter 7 .How to protect your UMPC.

3
Content
1 INTRODUCTION……………………………………………………………5
1.1 Main FEATURER …………………………………………………5
1.2 Open UMPC overpack …………………………………………6
1.3 Internal front-end UMPC …………………………………………7
UMPC Status Icons……………………………………………………………………8
Easy Button Function…………..……….…………………………………………… 9
1.4 UMPC FRONT …………………………………………………10
1.5 UMPC LEFT…………………………………………………10
1.6 UMPC RIGHT ……………………………………………………10
1.7 UMPC BOTTOM …………………………………………………11
1.8 UMPC ACCESSORIES……………………………………… 11
2START USING ……………………………………………………………12
2.1 BATTERY …………………………………………………………12
Extended battery life time……………………………………………………………14
2.2 AC power connection……………………………………………14
2.3 Activate your UMPC ……………………………………………15
2.4 Adjust screen control……………………………………………15
2.5 Turn off the UMPC………………………………………………15
3 USE YOUR UMPC…………………………………………………………16
3.1 Activate your operating system…………………………… 16
3.2 Understand the functions of the keyboard……………………16
Basic functions of the keyboard……………………………………………………18
Cursor control keys…………………………………………………………………19
Screen control button ………………………………………………………………20
Windows Operating system hotkey…………………………………………………20
Special function keys………………………………………………………………20
3.3 Use touchpad pointer device …………………………………22
3.4 screen settings……………………………………………………23
You can set the display configuration ……………………………………………23
3.5 Understand the power-saving work……………………………24
3.6 Use built-in hard disk drives …………………………………25
4 MULTIMEDIA INFINITE MUSIC……………………………… 25
4.1 UMPC multimedia features …………………………………… 26
4.2 Audio sound system function ………………………………26
4.3 Set audio drivers ……………………………………………26
4.4 Multimedia Programming window …………………………27

4
4.5 Recording ………………………………………………………27
Using an external microphone ……………………………………………………29
4.6 Playback of audio and voice …………………………………29
Use the media player………………………………………………………………29
4.7 MPEG Video Play………………………………………………29
5 CONNECTING PERIPHERALS ………………………………………30
5.1 Use USB port ……………………………………………………30
5.2 Use an external display (VGA port) …………………………31
5.3 Use an external audio system …………………………………32
5.4 Use LAN ports……………………………………………………32
5.5 USE WIRELESS LAN (wireless local area network) …………………33
6 ADJUSTING YOUR UMPC SETTINGS…………………………………33
6.1 Set procedures for the implementation of BIOS……………………33
6.2 Main Menu Help………………………………………… 34
6.3 How to Upgrade BIOS …………………………………………40
7 MAINTAIN YOUR UMPC …………………………………………………41
7.1 Safe use of the Code……………………………………………41
7.2 Clean UMPC………………………………………………………42
7.3 Safeguard the quality of LCD……………………………………43
7.4 Maintain hard drives ……………………………………………43
7.5 Battery maintenance f& attention ……………………………43
7.6 Traveling ……………………………………………………… 44
APPENDIX A : SYSTEM SPECIFICATIONS…………………………………… 44
CPUS …………………………………………………………………………………45
System memory………………………………………………………………………45
LCD display…………………………………………………………………………45
VGA system…………………………………………………………………………45
Media storage………………………………………………………………………45
Audio system ……………………………………………………………………… 45
Touchpad ……………………………………………………………………………45
Keyboard ……………………………………………………………………………45
Flash BIOS …………………………………………………………………………46
I/O port……………………………………………………………………………… 46
AC / DC Power Supply……………………………………………………………46
Battery ………………………………………………………………………………46
Weight and Size…………………………………………………………………………46

5
1 Introduction
Your UMPC is fully Windows-compatible portable UMPCs.
With the latest function-level multimedia technology, this
UMPC is your best travel partner. The use of the latest
technology and sophistication of the fuselage, your UMPC
can be applied to general commercial 、 personal
entertainment and professional applications. This powerful UMPC is your best
choice; you could use in your office, classroom, at home, on the way or other
environment.
1.1 Main features
Let’s get to know the main features about UMPC before introducing the UMPC
parts.
This UMPC adopt VIA ® C7-M ™ Mobile Technology platform. Its core adopts
logic structure entirely with the built-in processor and Intel ® PRO / Wireless
outstanding solution.
 Processing Unit
 Your UMPC using VIA ® C7-M 1600MHZ processor integrates 128 KB L2
cache.
 Fully compatible with Windows 2000/XP operating systems, such as all
systems and PC software applications.
Wireless LAN
 Intel ® Pro / Wireless Network Solutions
 Memory
 The UMPC to a memory slot, install DDR2 RAM 200-pin SODIMM modules,
up to 1024 MB.
 USB 2.0
 Provide three fast I / O data transmission USB 2.0 ports
 Graphic System
 VIA provides embedded in the chip group VIA/S3G graphics controller
PCI Local Bus Architecture
32 PCI Enhanced IDE can be enhanced CPU and disk drive data transfer rate
between. Support ultra DMA100 PIO Mode, the maximum PIO Mode 4, and the

6
structure of LBA Bus Control.
Audio Systems
Full-duplex 16-bit stereo audio system compatible with Sound Blaster and Sound
Blaster Pro.
Flash BIOS
Flash EPROM BIOS allows you to use tools procedures Phoenix Flash easily
updated system BIOS.
 Power and system management
 System chip integration of SMM, the closure of unused components to
reduce electricity consumption. In order to implement power management,
you can use the mouse click Windows console to set the parameters of
power options
 Suspend system allows you to enter idle immediately after the click of the
power button, can restore the original condition.
 BIOS settings from the user and the system administrator password to
protect your UMPC from unauthorized use.
1.2 Open UMPC over pack
The UMPC factory carton packaging provides strict protections towards your
UMPCs, when you get your UMPC, please open the box carefully, and check the
product inside. Except the user manual, crates also include the following items:：
 UMPC
 transformers and power cable
 lithium battery
 use manual / E-book Manual
 quick setup guide
Carefully examine each item to see whether there is a missing or damage. If there
is any missing or damaged item, please immediately notify the store which you
buy UMPC. Please retain packing materials and crates for your future UMPC use.

7
I.3 Internal front-end UMPC
This compact design of UMPCs, each side has characteristic features.
1. Color LCD 2. Shortcut key
3. Speed button keyboard SR 4. Touch Pad
5. Built-in camera 6. Status LED indicator
Color LCD
The UMPC with a color LCD screen, adjustable screen’s resolution to get the
best viewing results. LCD screen is 10.2 "TFT color LCD with resolution of 1024
x600. Color LCD display characteristics are summarized as follows:10.2"，
1024x600 TFT DPI panel. the 16 M color (32-bit color) LCD display control hotkey
allows you to adjust screen contrast easily.
Shortcut key
For more detail functions of those three keys, you can refer to easy button
functions in page 9.
Keyboard
Standard keyboard configuration, the Windows operating system hotkey button,
embedded numeric keypad, hotkey, T-shaped cursor control keys and paging
screen button.
Keyboard beneath the wide space allows you to place your wrist or hand, the
increase in typing comfort.

8
Touch Pad
Microsoft compatible mouse, there are three options button is a scroll button and
click touch pad button. Three buttons arranged in mouse pad below. Scroll is the
middle button allows you to scroll pages implementation of the function. Two click
buttons on both sides to support the click, select and drag-and-drop functions.
These standards similar to a UMPC mouse button the work done. As long as your
fingertips touch the mouse pad can control the cursor position. Use a mouse
button panels can choose the choice of menu items.
Built-in camera
USB 2.0 PC CAMERA, 1.3 million pixels, supports the use of video.
Status LED indicators
Continuing your UMPC power status and the current operating status information,
state icon will be described in the following paragraphs.
UMPC Status Icons
The use of UMPC icons status lights to indicate power status and system status.
Please refer to the following list of plans and to understand the significance of the
icon.
1. Indicator of the use of power 2. Battery charging indicator
3. Hard disk 4. Wireless LAN state
5. Num Lock and Caps lock
• Power Indicator
Let you know that UMPC power has started. Whether LVDS panel is opened, the
location of the signal lets you know that power state.
When the system power on, it will show a yellow light.
The UMPC yellow flashing lights will be displayed when it enter idle mode

9
• Battery charging indicator
Signals indicate battery charge status.
Yellow signal means the battery is charging.
Signal is off means it has been completed recharge the battery.
• Hard Disk
When the green signal shows means system access to hard disk.
• Wireless LAN state
When the green light is on, The Wi-Fi is working.
• Num Lock and Caps lock
When the light turns green, it means the Num lock on the keyboard (Num Lock)
key has been activated. When the button activated, you can use embedded
numeric keypad.
When light turns red, it means the caps lock on the keyboard (Caps Lock) key has
been activated. When the activation buttons all playing out of the alphabet keys
are all capital letters.
Shortcut keys’ functions
1. Fast Internet button 2. Quick Camera
3. User-Defined
• Internet Quick button.
You can define the functions of activation procedures. For example, you can
define the key to provide fast Internet use, as long as the icon on as a button. For
further details or more of this function are interested.
•Access to taking photos.
•User defined the short cut key.

10
1.4 UMPC Front
1．Microphone jack
Can be connected to a microphone to your UMPC
2. Headphone jack
Can be connected stereo headphones, external speakers for personal use.
3. SD / MMC card slot
Support SD / MMC cards.
1.5 UMPC Left
Your UMPC left with any of the characteristic features.
•1.Battery
• Equipped with rechargeable lithium Ion (Li-Ion) batteries, AC power supply
in the absence of circumstances, UMPC power supply. Please refer to Chapter 2.1
of the note to learn how to install batteries and discard.
• 2.cooling fan intake valve
Heat from the UMPC will be to maintain the temperature in the permissible range
1.6 UMPC Right
Your UMPC right side is with multi-features.

11
Right-side function
• 1.USB port
Universal Serial Bus (USB) port on your UMPC connects to the USB peripheral
devices (such as printers, monitors, scanners, etc.).
• 2.DC Power Interface
Connect power adapter to supply continuous power supply and battery charger.
3. External VGA display interface
VIA/S3G Unichrome Pro II built-in chip can be connected with monitor or
projector, greater viewing area. You can use the show hotkey options at the same
time will be displayed in the LCD screen and the external screen displays, or
switching to just the display.
4. LAN ports
Then within 10 Base-T/100Base/TX LAN module, through the local area network
will be your UMPC and other UMPC, or network connections.
1.7 UMPC Bottom
UMPC bottom features
1. Driver District. 2. Battery slots 3. Memory slots
• Hard sepal area
Please replace the hard drive at this open area on the lid.
• Battery slots
Equipped with rechargeable Li-ion battery.
• Memory slots
Remove screws can see a DIMM slots, the factory has been stuck DDR2 DRAM
memory.
1.8 UMPC Accessories
Transformer
Transformer can provide an external power supply, and at the same time
recharging. This voltage transformer with automatic switching capability; It is

12
access to connect with any 100 VAC ~ 240V AC outlet. When you connect
transformer, if UMPC power is opened, all will be recharged.
Battery
Apart from the use of transformers, your UMPC batteries may also be used to
provide electricity. Battery use of the lithium-ion rechargeable (Li-Ion) batteries,
when fully charged battery, and use power management functions can provide
hours of UMPC power. When you use the supply of electricity transformers,
batteries should be Add to the UMPC to an external power supply interruption, as
a back-up power, and are available to recharge the battery, prevent battery from
aging.
2 Start using
The UMPC design focus on easy to set up and use. This
chapter will describe the installation steps to make your UMPC
normal operation to the extent possible, to accelerate the pace
of implementation. If the dealer has been pre-installed all the necessary drivers,
or an updated version of the driver, please contact dealers。
2.1 Battery
The UMPC is designed to use the power source of the following:
• Use the power transformer connected to the use of AC power socket.
• Use lithium batteries.
Please make full use of transformers, in the absence of AC power.
When you use the UMPC, rechargeable lithium-ion battery lets you in the absence
of an external power supply. When you connect transformers, rechargeable
batteries will start immediately. Generally the usage of lithium batteries is about
four hours.
To achieve the maximum capability of batteries, do not charge the battery before
the rechargeable battery to fully discharge. To complete battery discharge, please
remove transformer plugs, switch off the power management functions (in the
Windows Setup and configuration), and then turn on the power. When the battery
is fully discharge, please start charging plug transformer plugs.
If you do not fully discharge the battery, the battery will not be able to fully
charged.

13
lithium batteries are more fragile than nickel-metal hydride batteries, so please do
not use other transformer rechargeable lithium batteries action, or else they may
combustion or explosion。
Install battery
These UMPC batteries provide the most convenient installation methods. You can
be part of processes can be inserted into the battery slot at the battery.
Remove the battery
To remove the battery, keep fixed to the left &right hold button down, and at the
same time removing both the buttons on the opposite side to pick the battery.
Replacement batteries
When your UMPC estimates only remaining minutes of battery power, LED status
panel on the battery icon will be flashing, and a shortage of electricity Bleep
beeps to remind you the power shortage. If you use a sound system, hard disk will
consume a lot of electricity, your UMPC power than that expected by the time you
faster depletion. You must insufficient power transformer will be connected to
your UMPC, or your UMPC and data storage to idle drives. Otherwise UMPC will
automatically enter idle drives and data storage to Close. Unless you connect or
power transformer has been installed on rechargeable batteries, it can not be
re-activated UMPC. To install batteries, please refer to the above sections of
"battery" and "Remove the battery.
For Windows 2000/XP, Idle Mode (Hibernate (dormant) or Standby (standby)) in
the Windows Control Panel Power Options settings)
 In your replacement battery or connect transformers, has been determined to
save your information, otherwise it will cause data loss.
Battery
HOLD HOLD

14
Extended battery life time
When you go out on how to extend battery life, it is a simple but very important
matter. When you find at the workplace, you should pay attention to the external
light source will not be too light, the brightness of the screen and reduce the
intensity and contrast, please refer to chapter VI, "adjust your UMPC" power
management functions and a detailed description of various models.
2.2 AC power connection
AC power can be used to provide UMPCs and UMPC power in the battery charger.
The transformers have the UMPC automatically switches designed to connect
240V AC ~ 100V AC power outlets.
AC power connection:
1. Power lines should be inserted into the AC power transformer jack.
2. Power line into the other side AC power socket.
3. Transformer will be inserted into the connector on the UMPC behind the DC-IN
jack.
·Please try to transformer connected to the UMPC and batteries installed in the
UMPC, so suddenly in the middle of the power to ensure that the UMPC's power
supply and avoid data loss.
·The power supply products to use qualified power line.
·Make sure you are using the expansion slot and can support all lines connected
devices total current negative Dutch.
·Clean in front of the UMPCs, make sure all have been removed external power
supply (for example, the AC power transformer) Connectivity.

15
2.3 Activate your UMPC
·Power Activation (Power) button at the top of the base. Press the power button
activated your UMPC and check whether the power supply turn on the lights.
·After a few seconds, the UMPC will turn on the screen; the UMPC will begin the
implementation of activated self-test (Power on Self Test or POST) examination of
all system components are working properly. In the course of testing found no
errors, will be displayed on the screen and may issue short beeps.
·Self-test, the screen will display the message "press <DEL> to RUN SETUP." At
this point you need to perform this procedure, because your dealer has to
complete the necessary settings. The other additional settings please wait
reference to Chapter VI, and to implement SETUP program.
·After the test is completed, the UMPC will begin the search for hard disk
activated by the operating system. The UMPC are usually in the drive, the
Windows operating system pre-installed. Please refer to the use of the Windows
operating system manual to understand how to use it, or contact dealers for
assistance.
2.4 Adjust screen control
LCD screen brightness can be <F6> <FN> + / + <F7> <FN> bond to be adjusted.
You must be in your UMPC activated after further adjustments to obtain the best
effect.
·If TFT color screen brightness adjustment can only use hotkeys.
Hotkey adjustable brightness of the LCD screens brightness. Hot Keys screen
brightness can not be adjusted for the whole white or black, it can provide
adequate LCD screen with brightness to the brightness of the external
environment. In the bright room, you must increase the brightness of the LCD
screen.
2.5 Turn off the UMPC
If you have a period of time will not use the UMPC, it is advisable to power down

16
to increase their use of time. Before you switch off the power, you must close all
applications, operating system shut down again
When you use the UMPC longer period of time, will be closed after the UMPC, a
habit for LCD screen panels and fuselage kept open state for a period of time, so
the UMPC will allow more internal mechanical cooling. If the closure panel LCD
screen, the UMPC's LCD screen temperature will be reached, if often done so, will
be accelerated aging of LCD screen. The situation is even more serious when the
UMPC boot, it will damage panel LCD screen, and then did not activate
power-saving function.
3 Using your UMPC
This chapter will show you how your day-to-day UMPC operations
in the use of this UMPC's built-in functions. If you are a UMPC
navice, you must read your operating system manual to learn how to
use your UMPC. To be familiar with the operating system is very important. The
following sections will tell you about advanced operation, and allows you to try
other function.
3.1 Activate your operating system
UMPC operating system is an indispensable part. If there is no operating system,
and did not like playing chess board. Operating system is the implementation of
all software applications platform. At present the most popular operating system
for Microsoft Windows. Unless you are a UMPC expert-level users or the need for
more powerful operating system, otherwise let your dealer installation of a
Windows operating system. If your UMPC has been installed in an operating
system, then you open the UMPC operating system and activate the power, you
can start your work. Please refer to your operating system manual to understand
how to implement it.
3.2 Understand the functions of the keyboard
Your UMPC equipped with an 88-key keyboard, but provides identical functions to
standard-size 101 or 102 key keyboard of IBM. In addition to the standard
typewriter keyboard configuration, and several additional control function keys,
including the Windows operating system hotkey.

17
1. Function keys 2. Control button
3. Windows Start menu button 4. Control button
5. Windows shortcut keys 6. Cursor control keys Keyboard
Keyboard functions and instructions are as follows:
Function keys
Function keys in accordance with the application procedures and functions,
including keyboard, the F1 through F12. The buttons with the FN key can be
activated with the use of special features. Some key (the key word for blue) of the
design process, it has two functions.
Windows operating system keys
Use the following two keys to upgrade operational efficiency: Start Menu button
Be able to bring up the Start Menu.
Shortcut / application keys
It can be fast and convenient way to bring up the menu button.
Cursor control keys
Cursor control key allows you to move the cursor on the screen position. Cursor
on the screen based on the use of different applications, there will be a
flicker-bottom line, blocks or vertical lines. Cursor display a text input position.
Typing keys
On the blue button words, if press the control button at the same time will produce
different results.
Control keys - Ctrl, Alt, and Shift and for the control of FN keys, and the use of
other buttons at the same time, they can change their function. Use control
button, hold down the control button, then press the other button. For example:
"by Ctrl C" means hold down the Ctrl key and press the letter C bond. This modular
approach to your keys used by the application will have specific functions.

18
Basic functions of the keyboard
keyboard functions
<Enter> Key executable instructions. In many text
editing application, enforceability <Enter "button for
firms with similar general typewriter.
<Esc> Button. Click this button to cancel or leave the
command or function.
<Ins> Insert key is key. Click this button can be
switched keyboard input information for insertion or
coverage model.
+
Shift + <Prt Sc> button. Print Screen key is. . Back on
the video screen to the shared memory as to your
specific purposes.
<Del> Key is the Delete key. Click this button to the
right of the cursor to delete characters, or delete
anti-white text or content.
+
Shift +<Pause> button. Press this button to
temporarily stop the execution. Any button and then
resume the implementation of directives.
< Bksp> Button. Click this button to the left of the
cursor to delete characters.
<Shift> Button. Click this button and at the same time
by other letter keys can be made large write. Use this
key and characters by double bond (the second
button as a symbol) can be made top marks button. At
the same time for most applications, in combination
with other keys to perform specific instructions.

19
keyboard functions
<Tab> Button. Click this button to move the cursor to
the right of a positioning point. The typewriter keys
and the general similar.
<Ctrl> Button. Control is key. Used in many
applications, in combination with other keys to
perform specific instructions.
<Alt> Button. Alternate is key. Used in many
applications, in combination with other keys to
perform specific instructions.
+
Fn + <Num Lock> button. Embedded 15 activation
buttons numeric keypad. The buttons on the blue
markings.
<Caps Lock> button. Used in many applications, the
use of capital can be fixed bond.
Cursor control keys
Button Keyboard function
Up arrow key. Each times the cursor moving upward
and his entourage.
Down arrow keys. Each time moving the cursor down
and his entourage.
The left arrow key. Each time the cursor left a mobile
grid.
The right arrow key. Each time moving the cursor to
another grid.

20
Screen control button
button Button function
<Home> Button. The cursor will move to the screen or
the start of a party.
<End> Button. The cursor will move to the screen or at
the end of the line.
WINDOWS operating system hotkey
button Button function
<Start> Button. Start button to bring up the Windows
operating system.
<Right Click> button. In the Windows operating
system functional equivalent of the right mouse
button.
Special function keys
The UMPC has several special function keys; function keys make these keys have
two functions. When and (Fn)"button at the same time pressed, the buttons can
be set system parameters, these buttons also known as" hot keys.
button Button function
+
Activate or disable the built-in speaker volume
turned on or off mode.