Sunleaves Durabreeze orbital wall fan User manual

Sunleaves DuraBreeze

Orbital Wall Fan

Thank you for choosing to grow with Sunleaves

Garden Products! Your satisfaction and success

are important to us. For best results, carefully

read the following instructions before using your

Sunleaves DuraBreeze Orbital Wall Fan.

6/2012

Assembly:

Mounting:

Mount your Sunleaves DuraBreeze Orbital Wall Fan by installing the provided hanging hardware to a sturdy location.

Align the hanging bracket with the slots located on the back of the fan housing to set the fan in place.

Adjustments:

To adjust the angle of the fan head, loosen the thumbscrew that connects the fan motor to the base. Tilt the fan head

to the desired location. Tighten the thumbscrew firmly.

Operation:

Your Sunleaves DuraBreeze Orbital Wall Fan is capable of producing three different breezes. To create a low breeze, set

the rotary dial to “1.” To create a medium breeze, set the rotary dial to “2.” To Create a high breeze, set the rotary dial

to “3.”

To engage the orbital oscillation feature, push down on the knob found at the top of the fan motor. To lock the fan in a

stationary position, pull up on the knob.

Overheat Protection:

For your safety, your Sunleaves DuraBreeze Orbital Wall Fan motor comes with an overheat protection feature. If the fan

motor begins to overheat, the motor will shut off automatically.

UL-Approved plug with Fuse

Your Sunleaves DuraBreeze Orbital Wall Fan comes equipped with a UL-Approved plug with a 5A fuse. In the event the

fuse becomes overloaded and damaged, switch the fan to the “Off” position. Unplug the DuraBreeze Orbital Wall Fan

from the electrical outlet. Replace the fuse by sliding open the fuse compartment found on the plug. Remove the damaged

fuse and insert a new 5A 125V fuse, slide the compartment cover closed. With the fan switch in the “Off” position, plug

in the DuraBreeze Orbital Wall Fan to an electrical outlet, switch the fan on to confirm functionality.

Visit Sunleaves.com for our full line of Dura products

1. Attach the cage back to the fan motor by aligning the two holes in the center ring of the cage

with the tabs on the motor. The cage handle should face the motor.

2. Thread the cage cap onto the motor. Tighten ﬁrmly by hand.

3. Seat the fan blades onto the shaft of the fan motor by aligning the ﬂat side of the blade hole

with the ﬂat side of the motor shaft. Thread the blade cap onto the motor shaft in a counterclockwise direction.

Tighten ﬁrmly by hand.

4. Locate the cage front and align it with the cage back. (Check for fan blade clearance between the cages and the

blades. If the blades rub on the cage, repeat the assembly process.)

5. Install the cage retainer over the combined front and back cages. Cages should ﬁt in the grooves provided inside the

retainer. Slide the retainer bolt through the retainer and thread on the retainer nut. Tighten the retainer bolt ﬁrmly

with a Phillips head screwdriver. Do not overtighten.

2 3

4 5

Safety Information

Do not replace the plug, as it contains a safety device (fuse) and should not be replaced.

• Always unplug unit before assembly, disassembly or cleaning.

• Always unplug unit when not in use, when moving from one location to another and before cleaning.

• To disconnect, grip the plug and pull it from the outlet. Never pull on the cord.

• Avoid contact with moving parts.

• Do not operate this product with a damaged cord or plug, after a malfunction, or if it is dropped or damaged in

any manner.

• Do not operate the unit in the presence of explosive and/or ammable fumes.

• Do not leave children unattended near the fan.

• Do not use outdoors.

• Do not operate if the product housing is removed or damaged.

• A loose t between the outlet and plug may cause the plug to overheat. Have a qualied electrician replace the

outlet if the plug doesn’t ﬁt properly.

• Do not run cord under carpeting or rugs. Arrange cord away from trafc areas so that it will not be tripped over.

• Never connect the unit to any power sources other than a 120V alternating current polarized outlet.

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this

plug is intended to ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the

plug. If it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to modify this safety feature.

Sunleaves Garden Products warrants this product to the original purchaser to be free of defective materials and workmanship under normal use and

service for 1 year from the original date of purchase. Sunleaves Garden Products, at its option, will repair or replace components of this fan if they

are found to be defective in material or workmanship within the warranty period. If Sunleaves, in its sole discretion, determines that the components

are defective in material or workmanship, then Sunleaves, at its option, will either repair or replace the components at authorized repair centers pro-

vided, however, that (1) a copy of the original proof of purchase for this product by the original purchaser is delivered to Sunleaves or its authorized

repair center, (2) the components have not been tampered with, disassembled, repaired by unauthorized persons, or altered, or (3) the components

have not been damaged as a result of commercial use, lack of reasonable and proper maintenance, abusive or unreasonable use, or supplemen-

tal damage. In no event shall the cost of repair or replacement exceed the original purchase price. SUNLEAVES SHALL NOT BE RESPONSIBLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, DAMAGE OR INJURY CAUSED TO OTHER

PRODUCTS, MACHINERY, BUILDINGS, PROPERTY, LOST PROFITS, LOSS OF TIME, LOSS OF PRODUCT OR INCONVENIENCE. SUNLEAVES FURTHER

DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

To obtain warranty service, return the product to the place of purchase in accordance with store policy.

Sunleaves 1-Year Limited Warranty

Don’t forget to include the following items if you are returning your product to the place of purchase:

• Legible copy of your properly dated sales receipt

• This completed form

Name: ....................................................................................................................

Address: ..................................................................................................................

Phone #: ..................................................................................................................

Email Address: .............................................................................................................

Explain the problem: ........................................................................................................

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

If the dealer is unable to resolve the problem:

1. Call our toll-free number at 888-464-9676 or email

[email protected] to receive warranty information.

2. In the event you must return the defective product to Sunleaves, care-

fully package the problem product.

3. Complete the form below and enclose it with your shipment along

with a legible copy of your properly dated sales receipt. Because

Sunleaves is not responsible for products damaged in shipping, we

recommend insuring your package.

7854 North State Road 37

Bloomington, IN 47404

Phone: 888-464-9676

Email: [email protected]

Sunleaves Garden Products

Sunleaves Product Warranty Claims

To obtain warranty service, in the event that your product fails to operate, return the product to the place of purchase. Often times the supplier will be