Sunn 215 User manual

R
Your new Sunn 215 Bass speaker enclosure is constructed from 3/4”
(1.9 cm) 7-ply Birch Maple Plywood and is capable of handling up to 300
Watts of powerful clean sound. The Sunn 215 features two 15” (38.1cm)
speakers with 56 oz (1.6 kg) magnets and is designed for use with the Sunn
1200S, the Sunn 300T or any other professional quality bass amplifier. In
order to more fully understand the operational characteristics of your Sunn
215 Bass speaker enclosure, please read through all instructions and heed
all caution and safety warnings on both your amplifier and Sunn 215 Bass
speaker enclosure.
CONNECTING MULTIPLE 215 BASS SPEAKER ENCLOSURES
Because the Sunn 215 Bass Speaker Enclosure’s jacks are wired in
parallel, multiple 215 cabinets can be “daisy chained” together providing
additional output for larger venues. To do so, simply connect them by
inserting a speaker cable (16 gauge or larger) with a 1/4” plug into the input
jacks on the rear panel of each cabinet. Note: If using a tube amplifier, your
tube amp could fall into protect mode or even be damaged by using an
improper impedance load. Therefore, it is important to heed all caution and
safety warnings on both your amplifier and Sunn 215 Bass speaker enclosure.
SPECIFICATIONS
PART NUMBER 021-1674-000
DRIVERS Two 15 “ (38.1 cm) Steel Frame Woofers
2.5” (6.4 cm) voice coils
56 ounce (1.6 kg) magnets
CABINET 3/4 “ (1.9 cm) 7-ply Birch Maple Plywood
SENSITIVITY 96 dB, 1 Watt - 1 Meter
POWER HANDLING 300 Watts
IMPEDANCE 8Ω
CONNECTIONS Dual,ParallelWired,1/4”HighCurrentInputJacks
ENCLOSURE VOLUME VB= 7.3 ft3 (2.66 m3)
DIMENSIONSHeight: 41” (104 cm)
Width: 25.5” (65 cm)
Depth: 17” (43.2 cm)
WEIGHT 93 lbs. (42.2 kg)
P/N 051959
THE SUNN®215 BASS SPEAKER ENCLOSURE
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
051347
power rating
300W
impedance
8Ω
R
051347
power rating
300W
impedance
8Ω
R
From
AMP