Sweetpea Baby LEXINGTON 3-in-1 Convertible Mini Crib User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep instructions for
future use. 0822R1-719A
Owner’s Manual
LEXINGTON
3-in-1 Convertible Mini Crib
Scan the QR code to register your product
https://www.sweetpeababy.com/customer-care/product-registration/

SAFE SLEEP TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly,
please place them on a
soft surface.
Contact Sweetpea
Baby in case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the surface
and could damage the
protective coating.
For a Safe and
comfortable Sleep
experience, we
suggest using Dream
On Me or Evolur
Greenguard Gold
Certified Full-Size
Mattress.
0-6
2www.sweetpeababy.com/help

…. for choosing Sweetpea Baby and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Sweetpea Baby warrants its product to be free from defects in material
and workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
www.sweetpeababy.com/help 3

WARNINGS
www.sweetpeababy.com/help
4
CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 23 3/4 BY 37 3/4 IN. WITH A
THICKNESS NOT EXCEEDING 2 IN.
• INFANTS CAN SUFFOCATE ON SOFT BEDDING. NEVER ADD A PILLOW OR COMFORTER.
NEVER PLACE ADDITIONAL PADDING UNDER AN INFANT.
• FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH. DO NOT USE THIS CRIB IF YOU CAN NOT PRECISELY
FOLLOW THE ACCOMPANYING INSTRUCTIONS.
• TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED
ON THEIR BACKS TO SLEEP UNLESS OTHERWISE ADVISED BY THEIR PHYSICIAN.
STRANGULATION HAZARD:
• STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A
CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS.
• DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS
OF THE BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE THE CRIB NEAR THE WINDOW OR PATIO DOOR WHERE CORDS FROM BLINDS
OR DRAPES MAY STRANGLE A CHILD.
FALL HAZARD:
• WHEN A CHILD IS ABLE TO PULL TO A STANDING POSITION, SET THE MATTRESS TO THE
LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS, AND OTHER OBJECTS THAT
COULD SERVE AS STEPS FOR CLIMBING OUT.
• THIS CRIB HAS ADJUSTABLE MATTRESS SUPPORT FOR THE CONVENIENCE OF THE PARENT
WHEN THE BABY IS TINY, THE MATTRESS SUPPORT MAY BE USED IN THE HIGHEST
POSITION.
• NECESSARY: WITH THE MATTRESS SUPPORT AND MATTRESS IN THE HIGHEST POSITION, BE
ABSOLUTELY SURE THAT THE TOP OF THE FRONT CRIB SIDE IS AT LEAST 3 INCHES HIGHER
THAN THE TOP SURFACE OF THE MATTRESS. IF IT IS NOT, LOWER THE MATTRESS SUPPORT
AND THE MATTRESS TO THE NEXT HIGHEST POSITION.
• STOP USING THE CRIB WHEN THE CHILD BEGINS TO CLIMB OUT OR REACHES A HEIGHT OF
35IN (89 CM), WHICHEVER OCCURS FIRST. THE CHILD SHOULD BE PLACED IN A YOUTH OR A
REGULAR BED.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, LOOSE BOLTS OR
OTHER FASTENERS, MISSING PARTS, OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND
FREQUENTLY DURING USE.
• SECURELY TIGHTEN LOOSE BOLTS AND OTHER FASTENERS. DO NOT USE THE CRIB IF ANY
PARTS ARE MISSING, DAMAGED, OR BROKEN.
• CONTACT SWEETPEA BABY - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854 FOR
REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE
PARTS.
• WHEN STORING A CRIB, USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR
HUMIDITY CAN COMPROMISE THE CRIB, MAKING IT EXTREMELY DANGEROUS TO YOUR
CHILD.

www.sweetpeababy.com/help 5
WARNINGS (cont.)
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY
FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF
HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS.
• DURING THE ASSEMBLY PROCESS WHENEVER USING SCREWS OR BOLTS, CHECK EACH BY
PLACING THE SCREW/BOLT ON THE DIAGRAM OF THE ITEM WHICH IS DRAWN IN ACTUAL
SIZE AND DESIGN.
• BE SURE TO USE THE PROPER SIZE AND SHAPE SPECIFIED IN THE INSTRUCTIONS.
• TO ASSEMBLE THIS UNIT YOU MAY BE REQUIRED TO PLACE THE UNIT ON ITS SIDE AND
FACE.
• IT IS STRONGLY RECOMMENDED THAT ASSEMBLY IS DONE ON A SOFT, NON-ABRASIVE
SURFACE TO AVOID DAMAGING THE FINISH.
• KEEP CHILDREN AND OTHERS SAFE BY FOLLOWING THESE SIMPLE RULES:
• DO NOT ALLOW ANY CHILD TO PLAY ON FURNITURE.
• DO NOT ALLOW CLIMBING ON ANY PIECE OF FURNITURE.
• DO NOT ALLOW HANGING FROM ANY PIECE OF FURNITURE.
• ALWAYS MONITOR YOUR CHILD’S ACTIVITY WHEN IN THE NURSERY.
• FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
• NEVER USE PLASTIC SHIPPING BAGS OR ANOTHER PLASTIC FILM AS MATTRESS COVERS
BECAUSE THEY CAN CAUSE SUFFOCATION.
• INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO
SMALL.
• ENSURE A SAFE ENVIRONMENT FOR THE CHILD BY CHECKING REGULARLY, BEFORE
PLACING THE CHILD IN THE CRIB, THAT EVERY COMPONENT IS PROPERLY AND SECURELY
IN PLACE.
• TO AVOID HEAD INJURY, DO NOT ALLOW ANY CHILD TO PLAY UNDERNEATH THE CRIB.
• NEVER ADD AN ACCESSORY SUCH AS A BASSINET OR CHANGING TABLE THAT EXTENDS
OVER THE SLEEPING AREA.
• IN CANADA ONLY: USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM AND IS OF
SUCH A SIZE THAT, WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF THE CRIB, IT DOES
NOT LEAVE A GAP OF MORE THAN 3 CM BETWEEN THE MATTRESS AND ANY PART OF THE
SIDES OF THE CRIB. DO NOT USE THIS CRIB FOR A CHILD WHO CAN CLIMB OUT OF IT OR
WHO IS TALLER THAN 90 CM.

PARTS
www.sweetpeababy.com/help
6
If there are any missing parts, please contact Sweetpea Baby before using the
product.
Left Feet (x 2)
1Right Feet (x 2) 2
Left Side Panel
5 6 Right Side Panel Headboard
7
Footboard
8 9 Mattress Support Panel Mattress
10
Center Base Rail (x 2)
3

HARDWARE
www.sweetpeababy.com/help 7
If there are any missing parts, please contact Sweetpea Baby before using the
product.
Bolt 2-1/8” (×8)
ABolt 1-9/16” (×4) B
Bolt 5/8” (×4)
E
Allen Key (x1)
KWrench (x1) L
Barrel Nut (x8)
FNut (x4) G
Bolt 1-1/4” (×8)
C
Bolt 1” (×4)
D
Wooden Dowel (×4)
H I J
Philips Screw Driver (NOT INCLUDED)
Tools Needed:
Left Support
Brackets (×2)
Right Support
Brackets (×2)

www.sweetpeababy.com/help
8
Bolt 1” (×4)
D
Nut (x4)
G
Wrench (x1)
L
(D)
(F)
(L)
(I)
(I)
(I)
(I)
(J)
(J)
(9)
(9)
(9)
I J
Left Support
Brackets (×2)
Right Support
Brackets (×2)
1
CRIB ASSEMBLY - MATTRESS SUPPORT PANEL ASSEMBLY
1a. Place the parts required
for assembly of the crib on
a soft surface.
1b. Align the Right Support
Brackets (J) and Left
Support Brackets (H) to
the corners of the
Mattress Support Panel (9)
as shown in the diagram.
1c. Use the Bolts (D) and Nut
(F) to attach them to the
board.
1d. Use the Allen Key (K) and
Wrench (L) to tighten the
same.
1e. Make sure the orientation
of the support brackets is
as depicted in the
diagram.
NOTE: Do not overtighten the
bolts.

www.sweetpeababy.com/help 9
Bolt 2-1/8” (×4)
ABarrel Nut (x4)
F
Wooden Dowel (×4)
H
(2)
(F)
(F)
(A)
(A) (A)
(A)
(H)
(H)
(H)
(H)
(F)
(F)
(1)
(3)
(2)
(3)
(1)
(A)
(H)
(F)
(2)
2
CRIB ASSEMBLY - CENTER BASE RAIL ASSEMBLY
2a. Align the Left Feet (1) and Right
Feet (2) to Center Base Rail (3) as
shown in the illustration.
2b. Position the Wooden Dowels (H)
between the feet and the Center
Base Rail in the insertions
provided on the lower end of the
Center Base Rail.
2c. Positon the Barrel Nuts (F) in the
insertions provided on the Center
Base Rail. Similarly, attach the
Bolts (A) to attach the feet to the
Center Base Rail.
2d. Use the Allen Key (K) to tighten
the bolts as shown in the
illustration.

www.sweetpeababy.com/help
10
Bolt 2-1/8” (×4)
ABarrel Nut (x4)
F
(5)
(6)
(7)
(A)
(F)
(7)
(6)
3
CRIB ASSEMBLY - CENTER BASE RAIL ASSEMBLY
3a. Align the Left Side Panel
(5) and Right Side Panel
(6) to the Headboard (7)
as shown in the
illustration.
3b. Position the Barrel Nuts
(F) in the insertions
provided on the top and
lower end of the side
panels. Similarly, attach
the Bolts (A) in the
insertions given on the
Headboard.
3c. Tighten the Bolts into
the Barrel nuts using the
Allen Key (K) provided.

www.sweetpeababy.com/help 11
(8)
(B)
(B)
(B)
(B)
(B) (8)
Bolt 1-9/16” (×4)
B
4
CRIB ASSEMBLY - FOOTBOARD ASSEMBLY
4a. Align the Footboard (8) to
side panels as shown in the
illustration.
4b. Attach the Bolts (B) in the
insertions provided on the
Footboard.
4c. Tighten the bolts using the
Allen Key (K) provided.

www.sweetpeababy.com/help
12
(8)
(E)
(7)
(9)
(9)
Bolt 5/8” (×4)
E
5
CRIB ASSEMBLY - MATTRESS SUPPORT PANEL ASSEMBLY
5a. Align the Mattress Support
Panel (9) to all the corners of
the crib as shown in the
illustration.
5b. Use the Bolt (E) to attach the
Mattress Support Panel to the
corners of the crib. Tighten the
Bolts using Allen Key (K)
provided.
5c. Note that the Lowest position
of the Mattress Support Panel
will be for Toddlers (babies
who can stand up and walk),
the Mid position is for infants
(babies who start to turn and
sit up) and the Highest
Position is for newborn
babies.
5d. Ensure that the Mattress
Support Panels are flat side up
and not at a slant.
WARNING:
1. Fall Hazard: When a child is
able to stand, set the mattress
at the lowest position and
remove bumper pads, large
toys, and other items that
could serve as steps.

www.sweetpeababy.com/help 13
(2)
(2)
(C)
(C)
(2)
(1)
(1)
(7)
(8)
(5)
(6)
Bolt 1-1/4” (×8)
C
6
CRIB ASSEMBLY - LEGS ASSEMBLY
6a. Place the
half-assembled crib
on its headboard such
that you can access
the bottom of the crib.
6b. Align the
pre-assembled legs to
the bottom of the crib
as shown in the
illustration.
6c. Attach the Bolts (C) in
the insertions
provided on the legs
fixing the legs and the
center base rail to the
crib. Tighten the Bolts
using the Allen Key (K)
provided.

www.sweetpeababy.com/help
14
(10)
7
CRIB ASSEMBLY - MATTRESS PAD ASSEMBLY
7a. Simply place the Mattress
Pad (10) onto the Mattress
Support Panel (9).

www.sweetpeababy.com/help 15
1
CONVERSION MODES - TWIN BED ASSEMBLY
1a. To convert the crib into a
twin bed, first, disassemble
the footboard and
headboard of the crib. Use
the Allen Key (K) provided.
1b. Remove the Mattress
Support Panel, followed by
Left and Right Panels.
1c. Store all parts and
hardware in a safe place.

www.sweetpeababy.com/help
16
1
CONVERSION MODES -TWIN BED ASSEMBLY (Contd.)
OPTION 1:
1d. To convert the crib to a Twin Bed,
you need the Headboard and
Footboard of the crib.
1e. NOTE: Make sure to follow the
complete instructions provided with
Hollywood Bed Frame (sold
separately) to convert the crib to a
Twin bed.
OPTION 2:
1f. To convert the crib to a Twin Bed,
you need the Headboard of the crib.
1g. NOTE: Make sure to follow the
complete instructions provided with
Hollywood Bed Frame (sold
separately) to convert the crib to a
Twin bed.
Hollywood Bed Frame (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
*Make sure to use the
Hollywood Bed Frame
(sold separately) in order
to convert the crib to a
Twin Bed.
*Do not put the mattress
directly on the wooden
slats, use either a Bunky
Board, Particleboard, or
low-profile Box Spring
before placing the
mattress.

www.sweetpeababy.com/help 17
FURNITURE CARE INSTRUCTIONS
ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is prepared for
furniture construction it is placed in a Kiln and the moisture content is brought down
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has
high humidity it will absorb it and expand and if the humidity is low it will lose
moisture and shrink.
• It is important that the humidity levels in the room be controlled from extremes of
too much humidity or too little. Furniture should not be placed close to the
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or
dehumidifiers. Exposure to extreme variations of temperature and humidity can
damage any fine wood product.
THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is controlled at a
temperature between 65 and 75 degrees and a relative humidity between 35 and 40
percent. Wood placed in an environment outside of those limits can and will shrink
or expand and may develop some small cracks which are not material or structural
defects.
STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity, doors and drawers may swell
and be difficult to open or close. Tolerances have been built into the units but
extreme conditions may still cause sticking. This will adjust back to normal over
time but until it does consider using a dehumidifier or rub candle wax or paraffin on
sides that stick.
AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some
cases darken them. It can also cause crazing or hair line cracks in the finish. White
finishes will yellow naturally over time and exposure to direct sunlight will hasten
this natural process along with some woods darkening naturally over time; this is
not considered to be a quality defect.
PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not store them
in a damp basement or hot dry attic. Allow air movement around the furniture and
do not stack anything on it.

www.sweetpeababy.com/help
18
FURNITURE CARE INSTRUCTIONS (cont.)
IN GENERAL:
• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing
can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage
to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive
cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Sweetpea Baby for replacement parts or
questions.
• Do not store the product or any parts in extreme temperatures and conditions such
as a hot attic or a damp, cold basement. These extremes can cause a loss of
structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended
to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty
of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.
YOU DID IT!
Congratulations Mom & Dad!
It's time to create your dream nursery. A safe, elegant
handcrafted crib that grows with your little one.

E-mail: [email protected]
www.sweetpeababy.com
Follow us on
to get your nursery featured on our social media.
@Mysweetpeababy @mysweetpea_baby
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
1532 S. WASHINGTON AVE STE1
PISCATAWAY, NJ 08854-9908

Lisez toutes les instructions avant d'assembler
et d'utiliser le produit.
IMPORTANT - Conservez les instructions pour
une utilisation ultérieure. 0822R1-719A
Manuel du propriétaire
LEXINGTON
Mini lit d'enfant 3 en 1
Scannez le code QR pour enregistrer votre produit
https://www.sweetpeababy.com/customer-care/product-registration/