Swift EB918D User manual

Original operating instructions . . . . . . . . . . . . . . 2
EB918D
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 1 Freitag, 11. November 2016 9:38 09

EB918D
2
Contents
Symbols used in this manual . . . . . . . . . 2
Symbols on the power tool . . . . . . . . . . 2
For your safety . . . . . . . . . . . . . . . . . . . 2
Noise and vibration . . . . . . . . . . . . . . . . 7
Overview . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical specifications . . . . . . . . . . . . 9
Instructions for use . . . . . . . . . . . . . . . . 9
Cutting techniques . . . . . . . . . . . . . . . . . 12
Maintenance and care . . . . . . . . . . . . . . 12
Disposal information . . . . . . . . . . . . . . . 13
Guarantee . . . . . . . . . . . . . . . . . . . . . . . 14
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result
in injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool For your safety
WARNING!
Before using the garden tool, read
and follow:
– these operating instructions,
– the user instructions of associated/
supplied accessories (charger, battery),
– the currently valid site rules and
the regulations for the prevention
of accidents.
User
This garden tool is not intended for
use by persons with reduced
physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or
instruction concerning use of the
General safety warning!
Before switching on the power
tool, read the operating manual!
Wear safety goggles.
Wear ear protection.
Wear head protection.
Wear protective gloves.
Wear safety shoes.
Protect the device from rain and
do not leave it outdoors in the
rain!
Risk of injury by falling branches!
Keep third parties away from the
danger area!
Risk of death by electrocution!
Never touch power supply or
telephone lines. Keep a minimum
distance of 15 m.
Keep third parties away from the
danger area!
Disposal information
(See page 27)!
The guaranteed sound power
level is 94 dB.
Direct current (DC)
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 16 Freitag, 11. November 2016 9:38 09
-Declaration of Conformity . . . . . . . . 14
94

EB918D
3
machine by a person respon-sible
for their safety.
Never allow children or people
unfamiliar with these instructions
to use the garden tool.
Supervise children. This will
ensure that children do not play
with the unit.
Intended use
This garden tool is
– intended for cutting and trimming hedges
and bushes which have a maximum
branch thickness of 24 mm;
– designed for maintaining hedges and
bushes in the private sector,
– not suitable for work above shoulder
height
– to use according to the descriptions and
safety instructions indicated in this
operating manual.
Any other use is not as intended. Improper
use is not covered by the warranty and the
manufacturer will reject any liability. The user
is liable for all injuries to third parties and
damage to their property.
Operate the unit only in the technical condition
as stipulated and delivered by the
manufacturer.
Arbitrary changes to the unit will exclude the
manufacturer from any liability for resulting
injury and/or damage.
General Power Tool Safety
Warnings
WARNING!
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term “power tool” in all of the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges and moving parts. Damaged
or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 17 Freitag, 11. November 2016 9:38 09

4
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
Power tool use and care
 Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
 Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
 Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
 Store idle power tools out of the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
 Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
 Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
 Use the power tool, accessories and tool
bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations
different from those intended could result in
a hazardous situation.
Battery tool use and care
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 18 Freitag, 11. November 2016 9:38 09
EB918D

5
Safety instructions for hedge
trimmers
Keep all parts of the body away from the
cutter blade. Do not remove cut material or
hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of
inattention while operating the hedge
trimmer may result in serious personal
injury.
Carry the hedge trimmer by the handle with
the cutter blade stopped. When transpor-
ting or storing the hedge trimmer always fit
the cutting device cover. Proper handling
of the hedge trimmer will reduce possible
personal injury from the cutter blades.
Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring. Cutter blades
contacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
Additional safety instructions
This unit is not designed to be used by
persons who have limited physical,
sensory or mental abilities or who have
inadequate experience and/or knowledge
of the unit, unless they are supervised by a
person responsible for their safety or they
have been instructed by the person how to
use the unit. Children should be supervised
to ensure that they do not play with the unit.
Switch the unit off and remove the battery
under the following conditions:
– if the unit is left unattended;
– before checking, cleaning or
performing other work on the unit;
– if the unit starts vibrating excessively.
While cutting, ensure that there are no
persons (particularly children) or animals in
the working area. Ensure that children do
not play with the unit.
Before switching on the hedge trimmer,
ensure that the working area is free of
stones and pieces of wire. Look out for
them while cutting and search the hedge
for concealed objects, such as wire fences.
Beware of overhead power lines.
Use the unit only in daylight or in good
artificial lighting.
Use the unit in dry conditions only. Protect
it from rain and moisture.
Ensure that the cutter does not touch the
ground or other objects.
Wait until the electric power tool has come
to a standstill before putting it down.
When interrupting work, never leave the
unit unattended and keep it in a safe place.
Always switch the hedge trimmer off before
transporting it to other workplaces.
Never grasp the blade of the hedge
trimmer.
Ensure that all guards and handles are
fitted before using the unit. Never attempt
to switch on an incompletely assembled
unit or a unit which has unauthorised
modifications.
Operate the unit only in the technical
condition stipulated and delivered by the
manufacturer. Unauthorised changes to
the unit exclude liability of the manufacturer
for any resulting damage and/or injury.
Spare parts must conform with the
requirements specified by the
manufacturer. Therefore use original spare
parts only or spare parts authorised by the
manufacturer. When replacing parts,
please follow the supplied installation
instructions and remove the battery
beforehand.
Have repairs carried out exclusively by
a qualified technician or a service centre.
Dress properly! Do not wear loose clothing
or jewellery, which can be caught in
moving parts. Use of sturdy gloves, non-
skid footwear and safety glasses is
recommended.
If the cutting mechanism strikes any
foreign object or the hedge trimmer starts
making any unusual noise or vibration,
shut off the power source and allow the
hedge trimmer to stop. Disconnect the
battery pack and take the following steps:
– inspect for damage;
– check for, and tighten, any loose parts;
– have any damaged parts replaced or
repaired with parts having equivalent
specifications
Familiarise yourself with how to operate
the hedge trimmer so that you know how to
stop it quickly in an emergency.
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 19 Freitag, 11. November 2016 9:38 09
EB918D

6
Safety instructions for the battery
charger
Keep the battery charger away from rain or
moisture. Penetration of water in the
battery charger increases the risk of an
electric shock.
Keep the battery charger clean.
Contamination can lead to danger of an
electric shock.
Before each use, check the battery
charger, cable and plug. If the supply cord
is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid
a hazard. Damaged battery chargers,
cables and plugs increase the risk of an
electric shock.
This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved, children
shall not play with the appliance. cleaning
and user maintenance shall not be made
by children without supervision.
Do not place any objects on the battery
charger and do not place the battery
charger on soft surfaces.
There is a risk of fire.
Always check that the mains voltage
matches the voltage indicated on the rating
plate of the battery charger.
Never open the battery charger. If the
battery charger is defective, take it to
a service centre.
This battery charger is uniquely designed
for charging the battery pack of this long
reach hedge trimmer. Never use the
battery charger to charge other battery
packs or other non-rechargeable battery
packs.
Safety instructions for Li-ion
batteries
Do not open the battery.
There is a risk of a short-circuit.
Protect the battery from heat, e.g. from
continuous exposure to sunlight, fire,
water and humidity.
There is a risk of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of
complaints. The vapours can irritate the
respiratory system.
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
Use only original batteries with the
voltage indicated on the rating plate of
your electric power tool. If other batteries
are used, e.g. imitations, reconditioned
batteries or third-party products, there is
a risk of injuries as well as damage caused
by exploding batteries.
The battery voltage must match the battery
charging voltage of the battery charger.
Otherwise there is a risk of fire and
explosion.
Recharge only with the charger specified
by the manufacturer. A charger that
is suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Pointed objects, such as nails or screw-
drivers, or external forces may damage
the battery. This may cause an internal
short-circuit and the battery to burn,
smoke, explode or overheat.
Avoid placing the battery pack
near heat source!
Never throw the battery pack
into fire!
Never expose the battery pack
in the rain, never throw the
battery pack into water!
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 20 Freitag, 11. November 2016 9:38 09
EB918D

7
Noise and vibration
NOTE
Values for the A-weighted sound pressure
level and for the total vibration values can
be found in the “Technical specifications”
table.
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for a prelimi-
nary assessment of exposure. The declared
vibration emission level represents the main
applications of the tool. However if the tool is
used for different applications, with different
accessories or poorly maintained, the
vibration emission may differ. This may
significantly increase the exposure level over
the total working period.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission may
differ. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 21 Freitag, 11. November 2016 9:38 09
EB918D

8
Overview
1 Insertion slot for battery
2 Handle
3 On/Off switch
4 Switch interlock
5 Shoulder belt
6 Fastening loop for shoulder belt
7 Lower shaft
8 Front handle
9 Upper shaft
10 Lower shaft
11 Locking button for working angle
12 Housing with ventilation openings
13 Cutting bar
14 Protection hood
15 Release button for battery
16 LED state of charge indicator
17 Battery*
EB20(2.0Ah)
Optional. Depending on delivery scope.
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 22 Freitag, 11. November 2016 9:38 09
EB918D
18 Battery charger
EBC05(0.5A), EBC20(2.0Ah)
*

9
Technical specifications Instructions for use
WARNING!
Switch the unit off and remove the battery
under the following conditions:
– if the unit is left unattended;
– before checking, cleaning or performing
other work on the unit;
– if the unit starts vibrating excessively.
Before initial operation
Unpack the garden tool and accessories
and check that no parts are missing or
damaged.
NOTE
The batteries (optional; depending on
delivery scope) are not fully charged on
delivery. Prior to initial operation, charge
the batteries fully. See user manual of the
battery charger.
Adjustments before using
WARNING!
Before performing any work on the garden
tool, remove the battery.
Assembling and adjusting the
shoulder belt
Open retaining hook and hook onto the
fastening eye on the housing.
Adjust the shoulder belt to your height.
Hedge trimmerAppliance
Type
40VNominal voltage
Battery type EB20
Ah 2.0
No-load stroke rate
min
-1
1300
Blade length mm 460
Maximum branch thickness mm 24
Weight according to “EPTA
Procedure 01/2003”
(without battery)
kg
3.5
Weight battery EB20
kg
0.75
A-weighted sound pressure level
according to ISO 22868, EN 3744:
Sound pressure level LpA
dB(A)
94
Sound power level LwA
dB(A)
104
Uncertainty K
dB 3.0
Total vibration value according to
ISO 22867:
Emission value ah
m/s²
3.26
Uncertainty K
m/s²
1.5
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 23 Freitag, 11. November 2016 9:38 09
EB918D
EB918D

10
Assemble the shafts

Please plug the shafts together as
illustrated(1).

Tighten up the shaft coupling(2).
Adjust the working angle
For high or low cutting the cutting head can
be tilted.
Press up the locking button (1.).
Set the required working angle (2.).
Release the locking button until it clicks
into place.
Inserting/replacing the battery
Charging the battery as described in the
user manual of the charger.
Press the charged battery into the power
tool until it clicks into place.
To remove, press the release button (1)
and pull out the battery (2).
CAUTION!
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts –
Explosion and fire hazard!
Switching on/off the power tool
Switching on
First press and hold the switch
interlock(1).
Then press the On/Off switch (2).
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 24 Freitag, 11. November 2016 9:38 09
EB918D

11
Switching off
Release the On/Off switch.
Battery state of charge
Press the button on the battery to check
the state of charge at the state of charge
indicator LEDs.
The indicator goes out after 3 seconds.
If one of the LEDs flashes, the battery must
be recharged. If none of the LEDs light up
after the button is pressed, the battery is
faulty and must be replaced.
Cleaning the cutter bar
(after each use)
Remove the battery.
Clean the cutter bar after each use.
Remove contamination, remains of
blades etc.
Spray the cutter bar with maintenance oil
to ensure that the hedge trimmer has
a long service life. Preferably use
environmentally friendly lubricants,
e.g. service sprays.
CAUTION!
Do not oil the hedge trimmer while it is
running.
Work instructions
Check that all parts are firmly attached
and obviously undamaged.
Look over the working area and remove
any obstructions.
Remove all foreign objects from the
hedge, such as wire or other parts, as
these may block or damage the cutting
mechanism.
Cut out thick branches beforehand using
pruning shears.
Pick up the power tool in both hands as
specified.
Always cut at full engine speed.
Start cutting only with the cutting
mechanism running.
Never touch wire fences or the ground
with the running cutting mechanism.
If cutting hedges over a prolonged
period, interrupt your work more
frequently and oil the cutter bar.
Switch the engine off and remove the
battery:
– to remove blockages (jammed
clippings) from the cutting bar;
– if the unit behaviour changes or it
vibrates unusually;
– if you have come into contact with
foreign objects or the ground;
– when taking breaks and leaving the
unit unattended.
NOTE
If the power tool is damaged or vibrates
unusually, it must be repaired by a service
centre before it is used again.
After use, stop the motor and wait until all
rotating parts have come to a standstill.
Place the protection hood on the cutter
bar.
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 25 Freitag, 11. November 2016 9:38 09
EB918D

12
Cutting techniques
The hedge trimmer can be guided with its
double-sided cutters forwards and back-
wards or in an oscillating movement from
one side to the other.
Cut the sides of the hedge first and then
the top.
Cut the hedge from bottom to top.
Hold the hedge trimmer at an angle
of 5–10° to the hedge to ensure a straight
cut.
Cut the hedge in a trapezoidal shape.
This prevents the lower part of the hedge
from losing its foliage due to lack of light.
Cut the upper edges of the hedge slightly
round.
Cut in several stages if heavy trimming is
required.
Peg out a string line if you want to cut the
hedge evenly.
Trim the young hedge plants to the
required shape. The main shoot should
not be damaged until the hedge has
reached the required height. All other
shoots can be cut back to half their
height.
Dispose of the clippings properly and in
an environmentally friendly manner.
Cutting times:
– Deciduous hedges – June and October
– Evergreen hedges – April and August
– Fast growing hedges (e.g. conifers) –
from May approx. every 6 weeks
NOTE
Beware of nesting birds in the hedge. Do not
cut the hedge until birds have fledged or do
not cut this part of the hedge.
Maintenance and care
WARNING!
Before performing any work on the garden
tool, remove the battery.
Sharp cutting tools! Wear protective gloves.
In the interest of your own safety!
Perform only the maintenance work
described here yourself. All other work, in
particular motor maintenance and repairs,
must be performed by a trained specialist.
Improper work may damage the power tool
and also result in injuries. Have power tool
inspected once a year at a service centre.
Cleaning
WARNING!
Do not use water or liquid detergents.
CAUTION!
Clean the unit after every use. Failure to
clean the unit can damage the materials and
cause malfunctions.
After each use, clean the hedge trimmer
using a dry cloth or a brush if the unit is
very dirty.
Never spray the hedge trimmer with
water.
Keep the ventilation slits clean and dust-
free.
Clean the cutter bar after each use.
Remove contamination, remains of
blades etc.
!
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 26 Freitag, 11. November 2016 9:38 09
EB918D

13
Spray the cutter bar with maintenance oil
to ensure that the hedge trimmer has
a long service life. Preferably use
environmentally friendly lubricants,
e.g. service sprays.
Place the hedge trimmer on its side and
apply a thin film of oil to the cutter bar.
Storage
Store the unit in a dry and frost-free place
(10-25 °C).
Store the battery and the unit separately.
Charge the battery before storing the unit
in winter.
Place the protection hood on the cutter
bar.
For space-saving storage push the hedge
trimmer together and fold it together.
Keep the unit, in particular its plastic
components, away from brake fluids,
petrol, petroleum products, penetrating
oil, etc. They contain chemical substan-
ces which may damage, attack or
destroy the plastic components of the
unit.
Fertilisers and other garden chemicals
contain substances which may have a
highly corrosive effect on the metal parts
of the unit. Therefore do not store your
unit near these substances.
Repairs
Check the unit for damage. Repairs may be
carried out by an authorised customer
service centre only.
Disposal information
WARNING!
Render redundant garden tools unusable:
– mains operated tool by removing the
power cord,
– battery operated tool by removing the
battery.
EU countries only:
Do not throw electric power tools into the
household waste! In accordance with the
European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and trans-
position into national law used electric power
tools must be collected separately and recyc-
led in an environmentally friendly manner.
Recycling raw materials instead of
waste disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly man-
ner. Plastic parts are identified for recycling
according to material type.
WARNING!
Do not throw accumulators/batteries into the
household waste, fire or water.
Do not open disused batteries.
Accumulators/batteries should be collected,
recycled or disposed of in an environmentally
friendly manner.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal
options!
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 27 Freitag, 11. November 2016 9:38 09
EB918D

14
Guarantee
This product has been manufactured to the
highest quality standards. When a new pro-
duct is purchased, it is guaranteed a 24-month
manufacturer’s warranty which comes into
force on the date the product was purchased.
The guarantee covers only defects which can
be attributed to a material and/or production
fault as well as non-performance of warranted
characteristics. When making a claim under
the guarantee, enclose the original sales
receipt with purchase date. Repairs under the
guarantee may be carried out only by work-
shops or service centres authorised by the
manufacturer. A claim may be made under
the guarantee only if the power tool has been
used as intended. This warranty is invalid
where defects are caused by or result from:
– misuse, abuse or neglect;
– commercial use (industry, craft, rental)
– repairs attempted by unauthorized repair
centers
– damage caused by external effects, foreign
objects, substances or accidents.
-declaration of conformity
We hereby declare, that the following product
in it‘s design and construction put by us into
circulation is in accordance with the appro-
priate basic safety and health requirements of
the following directives (see item 4).
This declaration relates exclusively to the
machinery in the state in which it was placed
on the market, and excludes components
which are added and/or operations carried out
subsequently by the final user.
Lenny Lu (General Manager)
18.03.2018
NingboNGPindustryCO,LTD
NO88Lane666,JinshanRoad,CZone
JiangbeiInvestmentCenterNingbo,
China315020
1. Description:
Battery operated telescopically hedge trimmer
for cutting hedges and bushes
2. Type:
EB918D
3. Serial number:
4. Applicable EC Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU
5. Used harmonized standards:
EN 60745-1; EN ISO 10517; EN 55014-1;
EN 55014-2; EN ISO 3744; EN ISO 11904
6. Additional used EC directives:
2014/30/EU; 2000/14/EC
7. Responsible for technical documents:
Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 28 Freitag, 11. November 2016 9:38 09
EB918D
Lenny LU (General Manager)
Ningbo NGP Industry Co., Ltd
No. 88 Lane 666, Jinshan Road,
C Zone Jiangbei Investment Center,
315020 Ningbo
People's Republic of China
8. Conformity assessment method
to 2000/14/EG, Annex V:
Measured sound pressure level ....94.0 dB(A)
Guaranteed sound power level ......96.0 dB(A)
Uncertainty K............................................3 dB
Notified Body for EC Directive 2000/14/EC:0036
TüV Süd Industrie Service GmbH
Westendstraße 199
80686 München
Deutschland