Sycamore SY9007 User manual

Installaon instrucons :
SY9007 Tunable LED Bathroom Mirror
with Demister
1) Please read these instrucons carefully before commencing any work
2) Please retain these instrucons for future reference
3) This unit must be installed by a qualied electrician in accordance with the IEE wiring regulaons and building regulaons
4) To prevent electrocuon switch the power o at the mains supply before installing or maintaining this ng
5) Ensure others cannot restore the electrical supply without your knowledge
IMPORTANT—Please read prior to installaon
CONTENTS & TOOLS REQUIRED
Thank you for purchasing this SycamoreLED.com product.
Please make sure instrucons are followed carefully prior to and during installaon and product is not altered, otherwise warranty may not be valid. For
technical support or warranty informaon please visit www.sycamoreLED.com, or call our dedicated technical helpline [phone].
INSTALLATION INSTRUCTIONS
AB
CONTENTS & TOOLS REQUIRED
This product is IP44 rated and is suitable for installaon in
Zone 2 & Outside Zones
BATHROOM REGULATIONS

• Please note this ng has non replaceable parts
• Always switch o or disconnect from the mains when cleaning the product.
• We recommend cleaning with a so dry cloth. Do not use scourers, abrasives or chemical cleaners.
• Do not allow moisture to come into contact with electrical parts
• This luminaire should not be disposed of with normal household rubbish. When a replacement is
purchased, this luminaire should be returned to the retailer to safely dispose of (WEEE Direcve
eecve July 2006—Waste from Electrical & Electronic Equipment)
INSTALLATION INSTRUCTIONS (CONT)
CD
E
Colour Temperature (CCT) Change and Dimming
• To select the preferred CCT, press the power buon
to turn the light on/o unl the correct CCT is
achieved. (2700K/4000K/6500K)
• The mirror will remember the chosen CCT next me
the mirror is switched on. (as long as the seng was
on longer than 8 seconds when last on.
• To dim the light, hold down the power buon unl
the desired brightness is achieved.
Demister Funcon
• Touch the demister switch to turn the demister
on/o.
• Demister will switch o automacally aer 30
minutes.
CARE IN USE
SycamoreLED.com
LS26 8XT
This product contains a light
source of energy eciency
class E