Mocka Oska Buffet User manual

Oska Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x12 x8
A B C D EFGHJ
KLMN
I
O
Hardware Supplied
P
dowel
x22
screw
x6
screw
x24
locking
nut x12
screw
x9 x8
QR
wedge screw
x x2
bracket
4
nut
cover
x2 x4
bolt
seal
x2
Sticker
x5
key x1 x8
Allen plug
plastic
glide x4
Phillips & Flathead screwdrivers
and hammer required
adjuster
x1
hinge
x4
S T
dowel
x4
big

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x bracket (M) to panel [5], secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket
(M) as shown. Flip the panel [5], insert 2x bolts (C) into panel [6]
and tighten with a screwdriver.
.
1
5
C
C
C
C
C
C
C
C
C
C
EE
N
M
E
E
FLIP
5

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach 1x bracket (M) to panel [6], secure with 2x screws (E). Tighten with
a screwdriver. Place 1x cover (N) over the bracket (M) as shown. Flip the
panel [6], insert 2x bolts (C) into panel [6] and tighten with a screwdriver.
Attach panels [5] and [6] to panel [7] with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
C
C
EE
N
M
E
E
A
A
AD
D
D
D
FLIP
6
6
5
6
7
A
D

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [8] down along the grooves between panels [5], [6] and
[7] to form the back of the unit as shown
Attach panel [1] to panels [5] and [6] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.
A
A
A
A
D
D
D
D
8
5
6
1
5
6

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [3] and [4] to panel [1] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Slide panels [8] and [9] down along the grooves between panels
[1], [3], [4], [5] and [6] to form the back of the unit as shown.
A
A
D
A
A
D
D
3
4
1
3
4
6
5
8
9
9

Oska Buffet
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 10
Assembly Instructions
Attach panels [10] to panel [2] with 4x big dowels (S) and 4x bolts (P), secure
with 4x nuts (L). Tighten with an Allen key (Q) and a screwdriver. Cover the holes
of panel [2] using 5x stickers (T) as shown. Attach panel [11] to panel [2] with 2x
dowels (A) and secure with 1x screw (B). Tighten with a screwdriver. Screw the
adjuster (G) to the panel [11].
Attach panel [2] to panels [3] ,[4], [5] and [6] with 8x dowels (A)
and secure with 8x screws (B). Tighten with a screwdriver. Attach
4x plastic glides (K) to panels [10] with a hammer.
S
A
B
P
P
P
S
P
Q
×
G
A
B
A
B
A
B
B
A
B
B
A
B
B
L
L
L
L
L
K
K
K
K
K
2
10
10
10
10
11
2
3
4
6
5
S
S
S
T
T
T
T

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Insert 8x shelf plugs (R) into the unit at the desired height for the shelves
and rest the shelf panels [12] onto them. Ensure the shelves are balanced
and stable.
Attach 4x hinges (F) to panels [13] and [14] using 8x screws (H),
and attach 2x seals (O) to panels [13] and [14], secure with 2x
screw (E). Tighten with a screwdriver.
R
R
R
R
E
O
H
H
H
H
E
O
H
4
12
512
6
313
14

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
Attach hinges on panels [13] and [14] to the unit using 16x screws (H).
Tighten with a screwdriver. Ensure the doors open and close easily. If
the cover (N) is not catching on the seal (O), adjust the magnetic end
by twisting it outwards.
Attach 8x wedges (I) into the corners of the back of the unit and
secure with 8x screws (J). Tighten with a screwdriver. Attach 1x
safety strap (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
H
H
V
Z
W
J
I
V
Z
W
1
H
13
14
8
98
9
N
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.

Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1615
Once assembled lift furniture into place, do not drag. Use a drill to create a
small hole lining up with the top of the safety strap (V). Fasten to the wall using
1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is balanced and
steady before use.
You’re done, enjoy!
X
Y
Z
1