Sykla One User manual

Model ONE
User Guide

1. Introduction
Congratulations on purchasing the SYKLA Model ONE.
We are confident that you will be happy with the quality
and features of this elegant timepiece.
The Sykla smart watch has the following features:
1. Always ON Technology (Android and iPhone)
2. Handle incoming calls (Android and iPhone)
3. Handle SMS messaging (Android)
4. Notification of SMS (Android)
5. Weather display (Android)
6. Pedometer (Android and iPhone)
7. Heart rate monitor (Android and iPhone)
8. Phone anti-lost (Android)
9. Find phone (Android)
10. Camera remote control (Android)
11. Waterproof
2

Warnings:
The watch is made to function in an ambient
temperature of ~15 to 120 degrees Fahrenheit.
When charging please make sure there is dry
surface, good ventilation and sufficient clearance.
When connecting to the USB port please use the
provided USB cable only.
If you disassemble, reverse engineer or modify the
device in any way it WILL void your warranty.
The device uses a Li-ion battery, which contains
harmful chemicals. User beware.
The battery may burst if handled incorrectly. Please
do not expose the battery to hard knocks,
puncture it, and keep it away from extreme heat or
fire.
To discard the watch, please take the watch to your
3

local recycling or waste management facility for
proper disposal.
Improper removal of watch bands, screws, or back
cover will damage the watch and void the
warranty.
2. In The Box
Sykla Smart Watch
USB cable and wall charger
User Guide
3. Before using the Sykla Smart Watch
Make sure the Smart Watch is fully charged. Please
charge the Smart Watch for 3 hours before use.
4

Smart Watch overview:
Figure 1: Smart Watch Physical Characteristics
Figure 1 shows the location of the physical interfaces:
•1.6” TFT display – display the user interface on
watch, and ALWAYS display the time as a regular
watch in standby state
•USB port – for charging
•Power – long press to switch ON/Off the Smart
Watch. Short press to switch the display On/Off and
5

to change time display image
•MIC and speaker – For voice communication
3.1 Power On/Off
Press and hold the power button 5 seconds to turn on/off
the device.
3.2 Reset the Smart watch
Press power button for over 6 seconds to reset when the
watch is dead.
4A. Getting Started (Android)
The Smart Watch works in tandem with an Android
Smart Phone through Bluetooth. The prerequisites are:
a) The Android version shall be at least 2.2.
b) The smart phone needs to be loaded with the
“SmartWatch” Application package (APK) to
6

interwork with Smart Watch. TheAPK is obtained
by visiting Google Play, download to the smart
phone and install. This is a simple procedure.
c) Procedure to download and install the
“Smartwatch” into the Smart phone.
4.1 Android APK download and installation
Turn on smart watch →Main menu → APP
download→Scan the QR code by phone (Fig.2)→ Visit
the link to download the APK (Fig.3)→Install the APK on
the phone.
7

Fig.2 Fig.3
4.2 Connect Smart Watch with the phone using
Bluetooth.
Settings on your phone→ Click Bluetooth ( Fig.4 ) →
8

Find "Smartwatch" in Bluetooth device list ( Fig.5 ) →
Pair with phone ( Fig.6 ).
9

4B. Getting Started (iPhone)
When connect via Bluetooth to your iPhone the Smart
Watch has some basic and useful functionality like
making and receiving phone calls and use Siri voice
control.
a) Make sure Bluetooth and Visible is enabled on the
Smart Watch.
b) On your iPhone go to Settings > Bluetooth
c) Locate the “SmartWatch” and connect to it
d) The Smart Watch will indicate “Connected”
5. Smart Watch – User interaction and navigation
Navigation:
The Smart watch uses Tap and Swipe for navigation for
going from one menu to another.
10

For menus with sub-menus, returning to the previous
menu is by swiping downwards on the screen.
Smart Watch notifications:
Smart watch has the following notification icons:
Missed calls
Unread message
Stopwatch on
Bluetooth on
Smart watch is connected with phone
Smart watch is synchronized with phone
Battery status
11

6. Functions and Settings on the APK (Android
Only)
6.1 Find watch:
Click on "Find watch" menu ( Fig.7 ), Smart Watch will
ring and vibrate ( Fig.8 ).
6.2 Camera:
Click on the "camera" menu ( Fig.9 ) and press OK to
confirm ( Fig.10 ). The watch will also display the same
interface ( Fig.11 ), and photos can be taken by pressing
the round button on the watch.
6.3 Sync contacts:
Click“Sync contacts”( Fig.12) → Confirm the request in
the smart watch ( Fig.13 )→ Synchronize the contacts
( Fig.14 ).
12

Fig.7
Fig.8
13

14

6.4 Weather City:
Click the weather city menu ( Fig.15 ), enter the name of
15

the city ( Fig.16 ), weather can be checked on smart
watch ( Fig.17 ).
16

6.5 Sport:
Smart watch will upload the sports records to the APK on
smart phone. The weekly and monthly data is displayed
in graphical form so as to help the user to control their
sports ( Fig.18, 19, 20 ).
17

6.6 Heart beat:
Smart watch will upload the records of heart beat to the
APK in the smart phone. The weekly, monthly data is
displayed in graphical form so as to facilitate the user to
know their health situation ( Fig21, 22, 23 ).
18

6.7 Settings on the APK
Settings includes accessibility settings, notifications
service settings, SMS service settings and other
settings.
19

6.7.1 Accessibility settings
Enter the following steps one by one on Smartwatch
APK, Main menu→Settings→Accessibility settings
( Fig.24 )→ Service/Smart watch ( Fig.25 ), turn the
off/on, then press “OK” to confirm, then the smart watch
service is on as is shown in Fig.26.
After smart watch service is on, receiving and sending
SMS, APP notification, music control, camera remote
control, phone anti-lost, find phone and sync weather
can also be operated on smart watch.
20