Synco MA30 User manual

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
MA30 Adjustable Microphone Arm Stand
User Manual
Material
Color
Net Weight
Maximum Bearing Weight
Upper Arm Length
Lower Arm Length
Clamp Length
Clamp Capacity
Aluminum
Matte Black Painting
1.212kg (2.67lbs)
4kg (8.81lbs)
36.5cm (14.37in)
40cm (15.74in)
8cm (3.14in)
0-5cm(0-1.96in)
Speci󽗉cations
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd

1. Adjust [A] to make the clamp adapt to the desk, shelf, counter,
etc. and tighten the screw.
2. Loosen [B] and adjust the bottom arm as per you need. Then
tighten [B] to lock the knob.
3. Install the microphone holder to the 5/8″ screw.
4. Place the microphone on the holder and ensure it is 󽗉rmly
held.
Operations
B
150°
20°
A
360°
36.5cm
36.5cm
Mainly made of aluminum, MA30 Microphone Arm Stand is easily operational
and equipped with aluminum clamp, ensuring 󽗉rm grip strength.
It can bear weight up to 4kg (8.81lbs) while be adjusted to multi-angle
(maximum: 150° )
Up to 4kg (8.18lbs) Bearing Weight
Collapsible Design
Adjusted to Multi-angle
Concealed Spring
Aluminum Clamp
Quality Steel Frame
① Microphone Holder
② Arm Stand
③ Aluminum Clamp
④ User Manual
Feature Introduction
Components Introduction
①
②
③
④