TAKARA DRY-WAVE TM1412 User manual

Body
Please double check if all the components are included. If there are
any missing or damaged parts please contact us or the retailer of
the purchased item.
1
Parts Included
1×BIG BASE
1×SMALL BASE
COUNTERSUNK SCREW M4×8×1
1×CAP
1×PULL CORD HOOK
●It is not intended to be used for any other purpose than hang drying laundry.
●Do not install near combustion appliances. Keep away from combustion or
heating appliances when hanging laundry.
●Install in places where laundry will not block or obstruct fire alarms, heating
and cooling duct outlets, or any other ventilation outlet.
●Can cause injury or damage to property.
●Can cause fire hazards.
●Can cause inadequate ventilation and fire hazards.
●For families with small children, be careful not to hang onto or
bump into product. ●Can cause injury or damage to property.
●Because this product is intended for enclosed terraces, enclosed glass terraces
and other indoor use only, please do not use outdoors or in the bathroom.
●Do not hang laundry that weighs over the 8kg capacity weight.
●Do no use if the pull cord is jammed or stuck.
●Risk of damage to property.
●Risk of damage to property.
●Can cause injury or damage to property.
●Do not play with or swing around the pull cord. ●Can cause injury or damage to property.
●Stop using the product becomes unstable while using. ●Risk of damage to property.
1394
PULL CORD
97 900〜1240 57〜397
142〜1200
φ104
Length of Pole =1400〜2100
1000
φ27.4
φ20
30°
80 17
80
Thank you for purchasing our Up and Down Steel Drying Rack. This product is
intended for hang drying laundry in an enclosed terrace, glass terrace or in any
other indoor room by manually elevating and lowering a laundry drying pole
that is mounted to the ceiling. Please read this guide carefully and exercise
safety precautions when using this product. For any inquiries concerned with
this product, please contact us or the retailer of the purchased item
TM1412
●This product is intended for enclosed terraces, enclosed glass
terraces and other indoor use only.
●It is not intended to be used for any other purpose than hang
drying laundry.
Installation Guide
Up and Down
Aluminum Drying Rack
Capacity Load Weight : 8kg ※To the installer.
Please hand this guide over to the end user after installation.
①Name of Each Part
②Safety Cautions
Warning Can result in death or serious injury.
Icon Important subjects Harm/Damage
Icon Important subjects Harm/Damage
Caution Can cause injury or damage to property.
The following signs have been used in this Installation Guide Spread of damage is expected Prohibited Actions Necessary to perform

●When using electric tools, make sure to make the proper torque adjustments.
Refrain from using an Impact Drill.
●When installing near a glass window, make sure that there is sufficient space so
that the pole will not come in contact with the window.
Furthermore, store away the pole during times of high winds.
●Risk of STEEL DRYING RACK falling or damaging of screws.
●Can cause damage to property.
●Can cause damage to property.
●Make sure that the location where the base will be mounted is firm and strong. ●Can cause damage to property.
●Do not install in places where the ceiling has a slope of more than 30°.
●Risk of STEEL DRYING RACK falling or damaging of screws.
●Locate the ceiling joist and use a screw that is most suiting.
2
※Decision on the location of mounting should be made after discussing it with owner of the product.
①Decide on where to mount. 120mm or more of space between the wall
and the PULL CORD side of the rack is necessary in order for the rack to
fit.
Since the PULL CORD is suspending, it is recommended to mount the
PULL CORD side of the rack towards the wall so that it is not hindering.
②On the PULL CORD side of the rack, mount the SMALL BASE with a
fastener (not included)（Use a fastener that is suitable for the the ceiling
joist.）
③Open up 1,000-1,240mm of space from the SMALL BASE and mount the
BIG BASE with a fastener (not included)
④Slide through the tip of the BODY of the rack through the BIG BASE.
⑤Slide the channel of the BODY through the SMALL BASE.
⑥Align the SMALL BASE to the countersink hole, then secure the BASE of
the PULL CORD to the BODY with the COUNTERSUNK SCREW included.
⑦Set the BASE parallel to the surface, then secure the BIG and SMALL BASE
with the ANGEL ADJUSTING SCREW.
⑧Attach the CAP. Push on the cap until the channel of the BODY is covered.
⑨Attach the PULL CORD HOOK onto the PULL CORD.
⑩Check if the rack operates correctly.
•Make sure that there is no rattle from loose screws.
•Check operations by elevating and lowering the pole via the PULL
CORD.
BIG BASE
SMALL BASE
Rafter Mount Installation
Setting Up The TURN NUT
⑥⑦
③
②
④ ⑤
①
⑧
⑨
900〜1240
Over 120mm
60
60
WALL
Big
Small
BIG BASE SMALL BASE
SMALL BASE BIG BASE
Part Name Part Image Quantity
4
4
For Wooden Structures: Item Number/DRY-10-12
φ6×75 cross-head
hexagon coach screw
Flat washer
Part Name Part Image Quantity
4
4
For Terrace Rafters: Item Number/DRY-06-11
Rafter
Base
Turn Nut Screw
※Not able to mount in some cases due to the type of rafter
M5 Use Turn Nut
M5×20truss head screw
③
④
①
②
■Parts List for Different Types of Structures（OPTIONAL）
Hole
※1
※1
The BIG and SMALL BASE are
structured differently.
The PULL CORD side of the rack is to
be installed onto the SMALL BASE.
※1
Caution Can cause injury or damage to property.
③Mounting Instructions
Sign Important Matter Hazards・Damages

●It is not intended to be used for any other purpose than hang drying laundry.
●Do not elevate and lower the pole more than 5 times consecutively.
●Can cause damage to property.
●Do not leave PULL CORD
hung down.
●Risk of PULL CORD being wrapped around the neck or
other parts of the body leading to an accident.
●The hoist mechanism may heat up causing potential damage.
●Hanging laundry unevenly with more weight on one side than the other. ●Can cause damage to property.
●Store away the pole when not in use or keep the extended part
of the rack rolled up. ●Can cause injury.
●Understand the different operating functions of elevating/lowering the pole
and restoring it to its original position before operating. ●Can cause injury or damage to property.
●Stop using if the cord gets tangled up, starts to wear-down or if any other
complications arise. ●Can cause injury or damage to property.
●For families with small children, be careful not to hang onto or
bump into product. ●Can cause injury or damage to property.
●If damage or deterioration of the rack is spotted, stop using at once. ●Can cause injury or damage to property.
●Do not hang laundry that exceeds the 8kg capacity weight. ●Can cause injury or damage to property.
●There is no lock function to the hoist so please be cautious when operating. ●Can cause injury or damage to property.
●Do not use during high winds. ●Can cause injury or damage to property.
●Do not dismantle or remodel.
●Do not pull on the cord itself or lower the pole in a slant position.
●Can cause the equipment to break or damage to property.
●Do not forcefully lower the pole more than 1200mm from the ceiling. ●Can cause the equipment to break or damage to property.
●Can cause the equipment to break or damage to property.
1.To Lower the Pole
Pull downwards ①side of the PULL CORD.
2.To Store Away the Pole
Pull downwards on ②side of the PULL CORD.
3.Adjust Length of Pole
③Pull on both ends of the pole.
However, stop pulling once the red line appears.
Using the PULL CORD HOOK
The pole will hit the stopper at the very top
near the body of the rack.
Do not pull the cord any further.
Can cause damage to the hoist function.
The pole will stop once it gets to the bottom.
Do not pull the cord any further.
Hook the S shape part of the pull cord HOOK to the PULL CORD.
After finishing up with elevating and lowering the poll, hook the pull cord HOOK onto the PULL
CORD like the figure shown on the right.
Red line
3
②
①
③
Pole Stopper
④Operational Instructions
Caution Can cause injury or damage to property.
Sign Important Matter Hazards・Damages
Sign Important Matter Hazards・Damages
Caution Can cause injury or damage to property.

200110
4
■Reference to how much laundry can be hung onto
this product.
Long Sleeve White Dress Shirt・Blouse 4Pieces
Short Sleeve Shirt・T Shirt 4Pieces
Socks (using a sock drying rack)5Pieces
Bath Towel 2Pieces
Sweat Suits 2Pieaces
Total
Est. 7.5kg
■Things to be careful about when hanging laundry.
・Do not apply all the load
weight on only one part
of the pole.
・Do not hang over 8kg of laundry. ・Hang the laundry evenly
across the pole.
For example, 1 day load of laundry for a family of 4.
1.Wet and wring out a soft cloth to wipe off any dirty spots.
2.For stains and other spots that are hard to remove, use a soft loth with diluted neutral detergent to rub off.
⑤
Caution Can cause injury or damage to property.
●Perform periodic check ups on whether the rack is stable or not. ●Can cause injury or damage to property.
●When cleaning the rack, do not use thinners, benzine or alcohol,
or any other type of glass cleaner that may contain organic solvents.
●Risk of causing the surface of the rack to dissolve, deform or distort in
some way.
●Do not use a hard brush or scrub brush. ●Can cause damage to equipment.
Maintaining the Rack
Sign Important Matter Hazards・Damages
⑦
⑥Thinking, Did It Breakdown?
Basic Specifications
2-2-30NagataEminenceBld.2F,
NagataNaka,HigashiOsaka-City,Osaka,
577-0013,Japan
TEL:[phone]
https://www.takaranet.co.jp/eng/
TAKARAINDUSTRYCO.,LTD.
Q.The BODY is unstable.
A.Stop operating and consult directly with the contractor.
Q.Is one end of the pole slanted lower than the other?
A.Is the laundry hung on the pole concentrated on one side of the pole? If so, please hang the laundry evenly along the pole.
Q.The pole doesnʼt elevate and lower smoothly.
A.Is the cord not tangled or worn-out? Please fix the tangle or ware-out.
A.Is the laundry hung on the pole over the capacity weight? Please decrease the load of laundry hung on the pole.
Item Number: TM1412
Gross Weight: 1,700g
Product Name: Up and Down Steel Drying Rack
Purpose: Enclosed Terrace Indoor Laundry Drying Rack
Material: Aluminum, Stainless, Zinc, POM, ASA, PP etc.
Country of Origin: Japan
Do not use the following to
maintain the rack. Acid or Alkaline Cleaners
(toilet detergents, household detergents, etc.)
Bleach
Thinners and other detergents which may include
organic solvents
Brushes and other hard scrubbers
Diluted Neutral Detergent Wipe Dry
Do not
scrub hard.
Use a soft cloth to completely
wipe down moist.
Alkaline
Acid
Bleach
Thinners