TDW StrapThor Pro User manual
by Thor’s Drone World
Body Tripod
User’s Manual
Congratulations
on your new
Content:
A. Adjustable Harness
B. Aluminium Support plate
C. 2x Hex Keys (Allen keys)
D. Wrench key 10 mm
E. Tripod Knob
*Optional:
Quick release mounting bracket
(not included)
Adjusting your
for the first time
Adjust the harness length to your body size, around your waist and
shoulders. The harness should sit tight around your body.
Start around the waist,
followed by the
shoulder’s straps
Strap the shoulder harness on the
side of the support plate, adjust the
length accordingly to your body.
Pull the strap to tighten
firmly to your body.
Once the harness is properly adjusted the next step is to secure
the lower plate to rest against your belly, using the big
Hex/Allen key provided.
This will increase stability to your body tripod when loaded.
Lower plate
Hex / Allen Key
Press the plate against
your belly until it rests
completely against it
Secure it in place by
locking the hinge bolt
with the Hex/Allen key
provided. Repeat on the
other side.
* You can lower or raise the position of the tripod mount by accessing
the screws on the back of the plate, with the help of the small
Hex/Allen key provided.
To do so, loosen all 4 screws,
marked in red (no need to remove
them) to adjust the position of the
mount accordingly.
Once in place, secure it tightly.
The angle of tripod support
plate can be adjusted
accordingly to your
preference.
With the help of
the big
Hex/Allen key &
Wrench tool you
can tighten it to
secure it in
place.
We recommend
loosen it a bit to
be able to adjust
the angle if
needed while in
use.
Once you have adjusted
your StrapThor PRO body
Tripod, you are ready to
mount any devices that
are equipped with a
tripod point, such as our
LifThor Holders, Cameras,
Microphones, Lights,
Tablet mounts and more.
With the tripod knob provided secure your device in place, as shown in
the picture
Once the device is properly
secured you are ready for full
hands-free mode.
The StrapThor Pro is sturdy
enough to hold up to +10 kilos
(+22 lbs)
*PRO TIP
For a more convenient and faster mounting, we highly recommend the
use of a Quick Release Mounting Bracket (sold separately). It would
allow you to mount / un-mount your device with just a click.
