Thor’s Drone World TRIPLTEK User manual

by Thor’s Drone World
User’s Manual
TRIPLTEK
bracket for
*Compatible with both Mavic & EVO versions

TRIPLTEK
mounting bracket
for

Content:
•Mounting bracket
•TRIPLTEK bracket
•2x Hex Keys
•Tripod Knob

How to assemble:
Remove the TRIPLTEK bracket
by unscrewing the tripod knob
from the mounting bracket.
Mounting
Bracket
TRIPLTEK
Bracket
tripod
knob

Replace the aluminum ball joint from
your LifThor Mjølnir holder with the
mounting bracket

Make sure the mounting bracket is properly secured
to your LifThor Mjølnir holder.
extension
arms

Unscrew the TRIPLTEK mount from the back with
the small Hex Key Provided.

Center the front bracket on the
TRIPLTEK tablet and align the back
part with the front bracket

Secure the bracket in place by attaching the rear piece.
We recommend placing both screws before securing it
tightly, to help it keeping it aligned. Once secured your
TRIPLTEK tablet is ready to be mounted.

Mount your TRIPLTEK Tablet to your remote control by
securing it with the tripod knob provided. Make sure to
adjust properly the position.

Once you have adjusted the prefered position/height you
can tighten the extension arms on the back with the help
of a 8mm wrench key to secure it in place.

All set!
Enjoy your flight!

www.lifthor.com