Technaxx TX-132 User manual

Technaxx®* User Manual
Mini Bluetooth LED Beamer TX-132
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before
using the device the first time, please read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute
from German fixed-line and 42 cent/minute from mobile networks). Free
Email: [email protected]
Keep this user manual for future reference or product sharing carefully.
Do the same with the original accessories for this product. In case of
warranty, please contact the dealer or the store where you bought this
product. Warranty 2 years
Enjoy your product * Share your experience and opinion on one of
the well-known internet portals.
Features
Mini projector with a powerful 1800 lumen LED lamp, multimedia
player, 2x 2W stereo speakers & headphone output
Connect your speakers via Bluetooth version 4.2
Compensation of low light conditions
Projection size 32”–176"
Manual focus adjustment
Low fan noise max. 54dB
Long LED lifetime ~40000 hours
Connectable with PC/notebook, tablet, smartphone, gaming
consoles Playback of video/photo/ audio files from
USB/MicroSD/external harddisk
Controllable via the remote control
Hints for Environment Protection: Packages
materials are raw materials and can be recycled. Do
not disposal old devices or batteries into the
domestic waste. Cleaning: Protect the device from
contamination and pollution. Avoid using rough,
coarse-grained materials or solvents/aggressive
cleaner. Wipe the cleaned device accurately.
Distributor: Technaxx Deutschland GmbH & Co.KG,
Kruppstr. 105, 60388 Frankfurt a.M., Germany

Product view & Functions
Menu Move up / Last file
Signal source Esc (exit)
V– (VOL) / Move left Indicator light
Lens Power button
Focus adjustment V + (VOL) / Move right
Keystone correction Move down / Next file
Power button: Press this button to shut on or off the device.
Volume plus and minus button: Press the two buttons to
increase or decrease volume. They can also be used in the menu
as selection and parameter adjustment.
Menu: Bring up the main menu or exit system.
Arrow keys: Move up, down, left or right in the menu options.
Signal source: Select the signal or an external video signal. It is
also usable as “play” button.
Lens: Rotate the lens to adjust the image.
Air outlet: Do not cover the air cooling openings during operation
to avoid burns.

Remote control & Functions
Power Switch OK
Menu Play / Pause
Select Signal Source Exit
Move Up / Last File Volume – (down)
Move Left / Backwards Volume + (up)
Move Right / Forward Mute
Move Down / Next File
Between the remote control and remote control receiving host
window, do not put any items, In order to avoid blocking the signal.
Point the remote control to the left side of the device or the
projection screen,to receive the Infrared Radiation.

Such as long-term when not in use take out the battery, remote
control to prevent battery leakage corrosion. Do not put the remote
control in high temperature or damp places, in order to avoid
damage.
Power on / Power off
After the device gets power through the adapter, it goes into stand-
by status:
Press the POWER button on the device or on remote control to
turn the on the device.
Press the POWER button again to turn off the device.
Pressing the POWER button once again can shut down the
engine power. TX-113 will stay in standby as long as it is
connected with the power socket. If you do not use the device for a
long time, take the power cord from the power socket.
Press the Mbutton on the device or the MENU button on the
remote control, to show the MENU screen.
According to the remote control or the ◄►buttons on the
projector you need to adjust or set level menu items, the menu of
the selected icon will brighten.
According to the remote control or the ▲▼ buttons on the
device in the lower menu choice you need to adjust the menu item.
Then press the OK button on the remote control or the OK
button on the device, to activate the selected icon menu at
secondary menu.
Press the ◄►▲▼ buttons, to adjust the parameter values for
the selected menu item.
Repeat the second to fifth step to regulate other MENU
items, or directly click MENU or EXIT button to EXIT a single
interface.
Multimedia boot screen
When the projector starts working, the screen displays takes about
10 seconds to come into the multimedia screen.

Focus & Keystone
Sometimes, the image projected on the wall looks like a trapeze
rather than a square, causing distortion that needs to be avoided.
You can adjust it with the keystone adjustment wheel (3) see
following picture.
Image focus
Put the device vertical to the projector screen or white wall. Adjust
the focus with the focus adjustment wheel (2) until the image is
clear enough. Then the focus is finished. During the focusing, you
could display video or display the menu to check the adjustment.
The device provides optical keystone function, so you could turn
the keystone to adjust the image. The device does not have
horizontal keystone correction function.
Multimedia connection
VGA input socket: the port can be connected to a computer or
other VGA video signal output socket. NOTE: The device and
connection of laptop may not be able to display images at the same
time, if that happens, set the computer display attributes, select for
CRT output mode.

Adjustment of computer’s (PC) output signal
Frequency (kHz) Field Frequency (Hz)
31.5 60
34.7 70
37.9 72
VGA
Resolution
640 x 480 37.5 75
31.4 50
35.1 56
37.9 60
46.6 70
48.1 72
SVGA
Resolution
800 x 600
46.9 75
40.3 50
48.4 60
XGA
Resolution
1024 x 768 56.5 70

Video input socket: from now on the interface can be connected
to the LD player, DVD players, video cameras and video player
(VIDEO) or audio output socket.
Video Player
Video signal cable: yellow
The left channel signal lines: White
The right channel signal lines: Red
Audio output: Audio signal from the output port of the device, if
you want to high powerplay music input end connected to external
power amplifier.
Station amplifier
AV Cable

HDMI signal input: this interface can be used with HD players.
You have to connect the supplied HDMI cable from your player to
the device.
HDMI Cable # Video Player
Operation
Input source selection
Selecting an input signal from the device: (Check that the correct
signal cable is connected).
 Press the Sbutton on the device or the SOURCE button on
the remote control to display the right interface.
 Confirm whether correctly connected to the signal cable
press ▲▼ buttons on the device or on the remote control to select
the following input PC, AV, HDMI, SD/USB (DMP). Choose your
needed input signal with the OK button.

Manually operation
Select the menu language
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄or ►button to go to OPTIONS.
 Press the OK button on the device or on the remote control
to enter the language option.
 Press the ▲▼ or ◄►buttons, to select the language
you need and then press the MENU button to accept Settings and
exit.
Set Clock Time
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄or ►button to go to the TIME settings. Press OK
on the device or on the remote control to enter the time settings.
Now you can select the day, the month, the year, the hour and the
minutes with the ▲▼◄►buttons. Then press the MENU button
to accept settings and exit.
Image model
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the OK button to enter the PICTURE settings. Now you
can choose with the ◄►buttons between DEFAULT, SOFT,
DYNAMIC and PERSONAL mode. Press the Mbutton on the
device or the MENU button on the remote control to exit the
PICTURE settings.
 After complete the adjustment, press the Mbutton on the
device or the MENU button on the remote control to save settings
and exit.
Color temperature
Press the ▼button to go to the COLOR TEMPERATURE
settings. Now press the OK button to enter the COLOR
TEMPERATURE settings.

 Press the ◄►buttons, to choose the settings you need to
adjust and then press the buttons ▲▼ or ◄►to adjust the values
of the parameters of the options (NormalWarmPersonaCool).
 Press the Mbutton on the device or the MENU button on
the remote control to save settings and exit.
Aspect Ratio
Press the ▼button to go to the ASPECT RATIO settings. Now
press the OK button to enter the ASPECT RATIO settings.
 Press the ▲▼ buttons to choose the parameters. You can
choose between AUTO, 16:9 an 4:3. Now press the OK button to
select the setting you need.
 Press the Mbutton on the device or the MENU button on
the remote control to save the settings and exit.
Noise cancel
Press the ▲▼ buttons, to go to the NOISE REDUCTION
settings. Then press the OK button to enter the NOISE
REDUCTION settings.
 Press the ▲▼ buttons, to select the level of noise reduction,
and then press the Mbutton on the device or the MENU button on
the remote control to save the settings and exit.
Image projection mode
Image flip Press the Mbutton on the device or the the MENU
button on the remote. Press ▲▼ to reach projection mode. Press
the OK button to rotate the image.
Sound
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄►buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose the items you need to
adjust and then press the ◄►buttons to adjust the values of the
single items. Press the Mbutton on the device or the MENU button
on the remote control to confirm and exit.

Mute
Press the Mute button repeatedly to close or to open the voice
signal.
BLUETOOTH
Bluetooth Pairing & Connect
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄►buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose Bluetooth. Press OK
button to change the status from OFF to ON.
Bluetooth (ON) shows that the projector is in Bluetooth searching
mode. If Bluetooth of the projector has found nearby BT speaker,
BT_DEVICES will light on. Press to enter the Bluetooth device list.
Choose the BT device which you want to connect. Press OK button
waiting for connection.
Mostly the speaker tells “connected” or “succuessfully connected”.
If you want to change to another BT speaker press the Mbutton on
the device or the MENU button on the remote control.
Navigate to SOUND settings and choose BT_DEVICES. Enter the
BT device list to choose Disconnect Device and press OK button.
This will disconnect the current connected BT speaker. Then
choose your new BT device.
Note: If the Bluetooth function of the projector is already connected
with a BT speaker, it will not search another BT speaker. If you
need to search another BT speaker, turn off last BT speaker or
disconnect via projector menu. Turn on the BT function again and
continue to search new BT speaker.
Bluetooth reconnection after shut down
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄►buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose Bluetooth. Press OK
button to change the status from OFF to ON. The last Bluetooth
speaker will connect automatically.

Disconnect Bluetooth
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄►buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose BT_DEVICES. Choose
Disconnect Device and press OK button. Speaker will disconnect.
Power off Bluetooth
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄►buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose Bluetooth. Press OK
button to change the status from ON to OFF.
Note: Each time beamer is turned off, the Bluetooth default is the
OFF mode. You need to enable Bluetooth again and enter BT
searching. If BT_DEVICES is in gray color check if your BT device
is powered on, waiting for searching.
Auto Volume
Press the Mbutton on the device or the MENU button on the
remote control to enter the MENU.
 Press the ▲▼ buttons, to select AUTO VOLUME.
Then press the OK button repeatedly to turn off or on the AUTO
VOLUME settings. Press the Mbutton on the device or the MENU
button on the remote control to confirm an exit.
Multimedia supported format from USB or MicroSD
Audio file: MP3 / WMA / ASF / OGG / AAC / WAV
Picture file: JPEG / BMP / PNG
Video file: 3GP (H.263, MPEG4) / AVI (XVID, DIVX, H.264) /
MKV (XVID, H.264, DIVX) / FLV (FLV1) /
MOV (H.264) / MP4 (MPEG4, AVC) /
MEP (MEPG1) VOB (MPEG2) / MPG (MPG-PS) /
RMVB(RV40)/RM

Choose the content which you need to display: Video, Music,
Photo, Text.
 The projector supports HDMI, MHL and iPush connection,
you can connect your mobile devices and tablets with it.
 Note that it only provides clear image in dark room.
 This product is NOT recommended for PPT, Word, Excel or
business presentation.
 To connect the mini projector with iPad or smart phone, you need
a wireless HDMI adapter.
For Android phone which supports MHL, you need a MHL to HDMI
cable; for iPhone/iPad, you need a lighting (Lightning Digital AV
Adapter) to HDMI adapter cable.
 To connect the mini video projector with PC/Notebook, help
adjust the PC/Notebook display resolution to 800x600 or 1024x768,
which can provide the bestclarify.
Hints
Make sure you lay the cable in a way that the danger of
stumbling is avoided.
Never hold or carry the device by the power cable.
Do not clamp or damage the power cable.

Ensure that the power adapter do not come into contact with
water, steam or other liquids.
You have to check the complete construction at regular intervals
for functionality, tightness and damage to prevent the defect of the
device.
Install the product due to this user manual and operate or
maintain it in accordance with the manufacturers operating
instructions.
Only use the product for purposes due to its intended function &
only for household use.
Do not damage the product. Following cases may damage the
product: Incorrect voltage, accidents (including liquid or moisture),
misuse or abuse of the product, faulty or improper installation,
mains supply problems including power spikes or lightning damage,
infestation by insects, tampering or modification of the product by
persons other than authorized service personnel, exposure to
abnormally corrosive materials, insertion of foreign objects into the
unit, used with accessories not preapproved.
Refer to and heed all warnings and precautions.
Safety instructions
Use standard power cord with ground wire, to ensure stable
power supply and the same power voltage with the product marked.
Do not disassemble the product by yourself, otherwise we will not
provide free warranty service.
Do not look into the lens when the projector is working, otherwise
it will damageyour eyes easily.
Do not cover the product’s ventilationhole.
Keep the product away from rain, moisture, water or any other
liquid as it is notwaterproof. It may cause an electric shock.
Turn off and cut off the power supply if not use the product for
longtime.
Use the original packing when moving the product.
Keep the product away from children.

Technical specifications
Bluetooth V4.2 / Profils: A2DP, AVCTP, HFP, HID, PBAP,
SPP / 8~10m distance / frequency band 2.4GHz /
radiated transmission power max. 1.6mW
Display LCD TFT with 800x480 pixel resolution
contrast ration 2000:1 / display colours 16.7M
Lens Optical lens with ±15° correction / Multichip
composite coating
Projection size 32”–176” / 1–5m distance
Projector consumption 50W / brightness 1800 lumen
Lamp color temperature 9000K / lifetime ~40000 hours
Signal ports
AV input (1. OVp-p +/–5%)
VGA input (800x600@60Hz, 1024x768@60Hz)
HDMI input (480i, 480p, 576i, 720p, 1080i,
1080p)
Headphone Output
USB / MicroSD card /
external harddisk
Video: MPEG1, MPEG2, MPEG4, RM, AVI,
RMVB, MOV, MKV, DIVX, VOB, M-JPEG
Music: WMA, MP3, M4A (AAC)
Photo: JPEG, BMP, PNG
USB / MicroSD card max.128GB (min. Class6) [not included]
External harddisk max. 500GB [not included]
Power supply AC 100V~240V / 50/60Hz
Using time ~24 hours continuously
Audio frequency 2W + 2W
Fan noise max. 54dB
Weight / Dimensions 1014g / (L) 20.4 x (W) 15.0 x (H) 8.6cm
Compatibility Digital camera, TV box, PC/Notebook,
Smartphone, game console, amplifier
Packing contents Mini Bluetooth LED Beamer TX-132, AV signal
cable, HDMI cable, Power Cable, Remote
control, User Manual