Technimount System BRACKET PRO 25 Series User manual
BRACKET PRO SERIE®25 & 25-HD
USER GUIDE
EMSTM
Return To Table of Contents
2 BP25 and 25-HD UG 202111-01 www.technimount.com
Copyright 2021 Technimount E.M.S. Holding Inc. (Technimount)
Bracket Pro Serie®, Technimount EMS™ are registered trade marks of Technologies CGC Inc.
sell Technimount products.
comments to our Customer Service Department at customerservice@technimount.com.
Copyright
www.technimount.com BP25 and 25-HD UG 202111-01 3
Return To Table of Contents
CORPORATE HEADQUARTERS
3770 Jean Marchand Street, Suite 100-C
Quebec (QC) G2C 1Y6
Canada
www.technimount.com
T + 1 888.639.2758
F + 1 855.339.6351
Contact Information
4 BP25 and 25-HD UG 202111-01 www.technimount.com
Table of Contents
COPYRIGHT ............................................................................................................................................................ 2
CONTACT INFORMATION....................................................................................................................................... 3
Corporate Headquarters ..............................................................................................................................................3
INTRODUCTION ..................................................................................................................................................... 6
Purpose of the Document ............................................................................................................................................6
Product Description .....................................................................................................................................................6
Intended use of the Product .......................................................................................................................................6
Possible Mounting Options for the Bracket Pro Serie® 25 and 25-HD .................................................................... 7
Symbols and Definitions ...............................................................................................................................................8
Warning / Caution / Note .............................................................................................................................................9
Product Illustration ...................................................................................................................................................10
BRACKET Pro Serie 25 and 25-HD ........................................................................................................................10
Overall View .....................................................................................................................................................................10
Specifications ..............................................................................................................................................................11
SUMMARY OF SAFETY PRECAUTIONS ................................................................................................................ 14
Warning/Caution/Note ..............................................................................................................................................14
INSTALLATION GUIDE .......................................................................................................................................... 16
Removing the Packaging for Installation .................................................................................................................16
Tools required for installation .................................................................................................................................16
Installation of the Bracket onto ZOLL X SERIES monitor/defibrillator ................................................................17
General Operating Guidelines for the Safety Arm System ......................................................................................22
Operating the Bracket on the Safety Arm System ...................................................................................................23
Installing the Bracket on the Standard Base.....................................................................................................23
Rotating the bracket on the standard surface base .........................................................................................23
Removing the Bracket from the Standard Surface Base .................................................................................. 24
PART NUMBERS ................................................................................................................................................... 25
Kits and Other Options ..............................................................................................................................................25
MAINTENANCE GUIDE......................................................................................................................................... 26
Cleaning the Bracket System ......................................................................................................................................26
Cleaning Process..................................................................................................................................................26
Cleaning Solutions...............................................................................................................................................26
Removal of Iodine Compounds ...........................................................................................................................27
Preventive Maintenance .............................................................................................................................................27
Lubrication ...........................................................................................................................................................27
Inspection Process and Schedule...............................................................................................................................28
Maintenance Program.........................................................................................................................................28
Inspection and Maintenance Record .........................................................................................................................29
Training Record ...........................................................................................................................................................30
Replacement Parts .......................................................................................................................................................31
WARRANTY .......................................................................................................................................................... 32
Warranty Policy ..........................................................................................................................................................32
LIMITED RESPONSIBILITY AND WARRANTY..................................................................................................................32
INTERNATIONAL WARRANTY CLAUSE ..........................................................................................................................32
This warranty reflects Canadian domestic policy. Warranty outside Canada may vary by country. Please contact
TECHNIMOUNT Customer Service for more information. ......................................................................................32
www.technimount.com BP25 and 25-HD UG 202111-01 5
Table of Contents
Return Policy ...............................................................................................................................................................33
Prior to 30 Days ...................................................................................................................................................33
Prior 45 Days ........................................................................................................................................................33
Prior 60 Days ........................................................................................................................................................33
Return Authorization .................................................................................................................................................33
Damaged Merchandise ................................................................................................................................................34
Claim Process ..............................................................................................................................................................34
Required Information..........................................................................................................................................34
Findings and Conclusion .....................................................................................................................................34
questions about our policy ........................................................................................................................................34
SAE CERTIFICATION ............................................................................................................................................. 35
FAA CERTIFICATION ............................................................................................................................................. 36
Return To Table of Contents
6 BP25 and 25-HD UG 202111-01 www.technimount.com
Introduction
PURPOSE OF THE DOCUMENT
Pro Serie®
®25 and Bracket
Pro Serie® 25-HD.
PRODUCT DESCRIPTION
The Bracket Pro Serie®
When used in emergency vehicles with a cot/stretcher, the Bracket Pro Serie®25 and Bracket Pro Serie® 25-HD can be
Red Quick Release Mechanism helps to deploy the unit almost instantly, allowing EMS responders to easily access the
The Bracket Pro Serie®25 and Bracket Pro Serie® 25-HD comply with the highest industry safety standards for the
line.
The Bracket Pro Serie®
INTENDED USE OF THE PRODUCT
The Bracket Pro Serie®
as described in this user guide. This equipment is for crew who has received the appropriate training necessary to
www.technimount.com BP25 and 25-HD UG 202111-01 7
Return To Table of Contents
Introduction
POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE®25 AND 25-HD
Return To Table of Contents
8 BP25 and 25-HD UG 202111-01 www.technimount.com
Introduction
SYMBOLS AND DEFINITIONS
SYMBOL DESCRIPTION
accompanying documents
Safe working load symbol and Load balance symbol
Pinch Point
www.technimount.com BP25 and 25-HD UG 202111-01 9
Return To Table of Contents
WARNING / CAUTION / NOTE
SYMBOL DESCRIPTION
not avoided, may result in minor or moderate injury to the user
device to avoid damage that may occur as a result of use or misuse.
NOTE
Introduction
Return To Table of Contents
10 BP25 and 25-HD UG 202111-01 www.technimount.com
PRODUCT ILLUSTRATION
BRACKET PRO SERIE 25 AND 25-HD
Overall View
Introduction
CNC machined aluminum feet to protect
device when placed on a surface
High-density
aluminum
plate with
silver or black-
High-density
aluminum side
blocks to install onto
the medical device
High-density aluminum
onto the medical device
www.technimount.com BP25 and 25-HD UG 202111-01 11
Return To Table of Contents
Introduction
SPECIFICATIONS
Product Name Bracket Pro Serie®25
Product Descripon
and cots/stretchers in emergency vehicles.
Compability of Medical Device*
Environment of Usage EMS (Ground & Flight), Hospital/Clinic, Military
Product Secon Material •
•
and Peek Cushions
Product Finish •
•
Environmental Regulaons Complying with RoHS 3
Temperature of Usage - 35° C to 45° C
Cercaon
•
•
Installaon
Blocks Installed onto the Medical Device
Aachment Opons
Transportaon Compability System
• Standard Surface Base
•
•
•
• Wall Mount
Features •
•
•
•
Physical Overall Dimensions Width 13.25 in, Depth 8.5 in, Height 1.25 in
Weight 1.54 lb
Part Numbers • 100-12-XZ - Bracket Pro Serie® 25
• 100-20-UN - Standard Surface Base
Other Models and Conguraon Opons
customerser[email protected]
* Product and medical equipment manufacturer names are trademarks™or registered trademarks® of their respective holders.
Technimount does not have a commerical relationship with these medical equipment manufacturers.
Return To Table of Contents
12 BP25 and 25-HD UG 202111-01 www.technimount.com
Introduction
SPECIFICATIONS
Product Name Bracket Pro Serie®25-HD
Product Descripon
and cots/stretchers in emergency vehicles.
Compability of Medical Device*
Environment of Usage EMS (Ground & Flight), Hospital/Clinic, Military
Product Secon Material •
•
and Peek Cushions
Product Finish •
•
Environmental Regulaons Complying with RoHS 3
Temperature of Usage - 35° C to 45° C
Cercaon
•
• §23 (applicable standards)
Installaon
Blocks Installed onto the Medical Device
Aachment Opons
Transportaon Compability System
• Standard Surface Base
•
•
• Wall Mount
Features •
•
•
•
Physical Overall Dimensions Width 13.20 in, Depth 8.30 in, Height 1.60 in
Weight 1.5 lb
Part Numbers • 100-12-XZ-HD - Bracket Pro Serie® 25-HD
• 100-20-UN - Standard Surface Base
Other Models and Conguraon Opons
customerser[email protected]
* Product and medical equipment manufacturer names are trademarks™or registered trademarks® of their respective holders.
Technimount does not have a commerical relationship with these medical equipment manufacturers.
www.technimount.com BP25 and 25-HD UG 202111-01 13
Return To Table of Contents
Notice/Certification
§23 (applicable standards). For
customerservice@technimount.com).
Technimount E.M.S. Holding Inc.
3770 Jean Marchand Street, Suite 100-C
Quebec (QC) G2C 1Y6
Canada
T + 1 888.639.2758
F + 1 855.339.6351
technimount.com
Return To Table of Contents
14 BP25 and 25-HD UG 202111-01 www.technimount.com
WARNING/CAUTION/NOTE
9
9Operate the bracket only as described in this user guide.
9Do not modify the Bracket, or any components of Technimount systems. Modifying the product can cause
9
with Technimount System products.
9
9
9
on a cot/stretcher. If not installed properly, the medical device could fall during transport and may cause injury to
9
9
9
9
9
9
void the product warranty.
9Failure to properly clean or dispose of corrosive products will increase the risk of premature damage and may
9
Summary of Safety Precautions
www.technimount.com BP25 and 25-HD UG 202111-01 15
Return To Table of Contents
WARNING/CAUTION/NOTE (CONTINUED)
9
9Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts.
9
with Technimount Systems.
NOTE
9Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If such
products are used to clean Technimount equipment, the equipment must be rinsed with clean water and thoroughly
9
9
9
of the product.
9This user guide should be considered a permanent part of the Bracket, and should remain with the product even if
the equipment is subsequently sold.
9
Customer Service or Technical Support at +1.888.639.2758.
Summary of Safety Precautions
Return To Table of Contents
16 BP25 and 25-HD UG 202111-01 www.technimount.com
Installation Guide
REMOVING THE PACKAGING FOR INSTALLATION
1.
2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to
3.
4. The Bracket System must work properly before being put into service.
5.
TOOLS REQUIRED FOR INSTALLATION
9Philips Screwdriver
NOTE
9
9
www.technimount.com BP25 and 25-HD UG 202111-01 17
Return To Table of Contents
1. The Bracket Pro Serie 25 and Bracket Pro Serie
25-HD are designed to be installed on the ZOLL X
2. Start by removing the 2 blocks located on the
3. Remove both blocks with a Philips Screwdriver
and store them as they will not be used for the
e Bracket Pro Serie 25 or Brack Pro
Serie 25-HD.
Installation Guide
INSTALLATION OF THE BRACKET ONTO ZOLL X SERIES MONITOR/DEFIBRILLATOR
18 BP25 and 25-HD UG 202111-01 www.technimount.com
INSTALLATION OF THE BRACKET ONTO THE ZOLL X SERIES MONITOR/
DEFIBRILLATOR (CONTINUED)
4. Locate the Bracket Pro Serie 25 or Bracket
Pro Serie 25-HD.
5. Locate both side blocks on the bracket. These
need to be removed and installed into the ZOLL
6.
7. Remove both side blocks from the bracket.
8. Keep the parts (Stainless steel blocks and Socket
Installation Guide
www.technimount.com BP25 and 25-HD UG 202111-01 19
Return To Table of Contents
Return To Table of Contents
INSTALLATION OF THE BRACKET ONTO THE LIFEPAK 15 MONITOR/DEFIBRILLATOR
(CONTINUED)
9.
10. Locate the screws provided with the bracket.
11.
▪Two (2) Stainless Steel Flat Head
▪Two (2) Stainless Steel Flat Head Philips
12. Install the blocks into the ZOLL X Series Monitor/
Installation Guide
Right Side Block
20 BP25 and 25-HD UG 202111-01 www.technimount.com
INSTALLATION OF THE BRACKET ONTO THE LIFEPAK 15 MONITOR/DEFIBRILLATOR
(CONTINUED)
Installation Guide
13. Ensure the blocks are placed according to
14. Once the blocks are installed, the ZOLL X
onto the Bracket Pro Serie 25 or Bracket Pro
Serie 25-HD.
15.
onto the bracket.
16. Locate the two (2) Stainless Steel Socket Head
the bracket earlier.
This manual suits for next models
1
Table of contents
Other Technimount System Rack & Stand manuals
Technimount System
Technimount System BRACKET PRO 105 Series User manual
Technimount System
Technimount System BRACKET PRO 120-GR Series User manual
Technimount System
Technimount System BRACKET PRO 101 Series User manual
Technimount System
Technimount System BRACKET PRO 120-GR3 User manual
Technimount System
Technimount System BRACKET PRO 121-GR3 User manual
Technimount System
Technimount System Bracket Pro Serie 110 User manual
Technimount System
Technimount System BRACKET PRO 80-FL Series User manual
Technimount System
Technimount System BRACKET PRO 120-FL Series User manual
Technimount System
Technimount System BRACKET PRO 76 Series User manual
Technimount System
Technimount System Cardiatek User manual
