Telefunken TTV32PF5 User manual

OPERATOR’S MANUAL
76 cm Colour Television
TTV32PF5
TTV32PF5

1
List of contents
Special features
Safety instructions
Getting started
Aerial connection
Switching on
Battery fitting
Control unit
Front and rear panel
External connections table
Remote control
Using the TV
TV controls
Manual tuning
Automatic tuning
Program edit
TV setup
Sound menu
Picture menu
Picture format
Child lock
Sleep timer
Using teletext
Connecting external equipment
Help and service tips
Technical specifications table
2
3
4
4
4
4
5
5
6
6
7
7
8
9
10
11
11-12
13
14
14
15
16-17
18-22
23
24

Television
Thank you for buying this television which is designed to give you many years of
satisfactory service.
You may already be familiar with using a television but do please take time to read these
instructions. They are designed to familiarize you with the unit’s many new features
and to ensure you get the very best out of your purchase.
2
Special features
• Your TV can receive stereo channels directly (NICAM optional).
• Automatic tuning system with country selection.
• 100 Program Memory
• Available for Cable Channels (A decoder maybe required)
• Manual Fine Tuning
• Child Lock
• Return to the last channel viewed (SWAP)
• Spatial Sound effect
• 16:9 picture format
• S-Video connection (optional)
• Audio/Video RCA sockets (optional).
• External Loudspeakers (optional)
• Normalization system to recall the setting in memory after the ,
brightness setting have been changed.
• Picture adjustment using one button (Smart control).
• Sound adjustment using one button (Smart control).
• Equalizer Sound Setup
• Automatic Volume Limiting
• Your TV set is equipped with an On-Screen Display system. This system
enables the user to see the function on-screen and to control them efficiently.
• Infrared Remote Control
• Virtual Dolby Surround (optional)
• Your TV will automatically switch off if it’s been programmed from 5 to 120 minutes,
and it will automatically switch to Stand by five minutes after a channel ceases to
transmit.
• Multi language menu system
• Stereo headphone socket (optional)
• Scart Socket: Video cassette recorder, satellite receiver, video disc player,DVD, TV
games or a home computer can be connected to this AV socket with an appropriate
connecting cable.
• Second scart socket (optional).
• Subwoofer (optional)
• Zoom, Letterbox, Subtitle picture formats ( for Widescreen TV sets)
• Naming the channels
• Teletext reception
• Auto recognition of the broadcasting format (4:3, 16-9 or Letterbox) via WSS feature.

3
Safety is Important
Your safety and the safety of others is important. Please, therefore, ensure you read
the Safetyinstructions before you operate this television.
Safety instructions
Read all the safety instructions before first use of your TV.
!
• Position the television so that direct light does not fall on
the screen. Excessive light will cause a washed out effect.
• Position the power supply lead and other leads so that
they are not likely to be walked on or pinched by things
placed on or against them.
• Do not use the appliance in humid or damp conditions.
Do not allow the appliance to get wet, i.e. dripping or
splashing, as this may be dangerous. Do not place water
filled objects, such as vases and flower top on top of the
appliance.
• Make sure that no naked flame sources, such as lighted
candles, are placed on top of the appliance.
• Do not use the television near any apparatus that produces
a magnetic field such as HI-FI speakers or electric motors
otherwise colourpurity may be affected.
• The heat built up in the set escapes through ventilation
holes, so do not cover the set by drapes, clothes etc. that may
block air circulation. Do not place the television on carpet
or soft furnishings.
• Clean the TV Screen using a slightly damp cloth or chamois
leather. Never use abrasive cleaning agents like liquid or
aerosol cleaners.
• If you wish to place the television on a shelf or in a wall
unit always ensure there is a minimum air gap of 8 cm
around the top, sides and rear of the television, to assist
ventilation.
• Your TV set is designed to operate with mains voltages
230-240 V 50Hz AC. Do not connect your TV set to power
sources other than the mains supply.
• Do not place the television near heat sources such as
radiators, ovens, stoves, etc.
• NEVER let children push anything into the holes or slots
on the case.
• Remove the mains plug from the socket outlet while cleaning.

Getting started
Remove your Television carefully
from the box. You may wish to
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your domestic
mains socket outlet (230-240 V 50 Hz AC).
Please Note
When not in use disconnect the plug
from the mains power supply.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
Press the Standby
button to switch
the TV to standby. The standby
indicator will illuminate.
Please Note
Do not leave the television on standby
unattended or overnight.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
Press the Power button on
the front of the TV. The
standby indicator will
illuminate.
7
4Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
Press a Numeric button or the
Program up or Program down
button on the remote handset or
Program up or Program down
button on the front panel to
switch the TV on.
The standby indicator remains on.
The picture will appear after a
few seconds.
store the packaging for future use.
In the box
Inside your this package you should have:
• Television
• Remote control
• User guide
• AAA batteries x 2

Control Unit
20” (51 cm) and 21” (55 cm) TV sets:
Program/Volume selection button
25” (63 cm) and bigger size TV sets:
Program Down/Up button
Program/Volume decrease button
Program/Volume increase button
Volume Down/Up button.
General
Program ON/OFF switch Stand by (Depends on model)
Stand by indicator
External Connections: (Front or side)
Right audio RCA (Red)
Left audio RCA/Mono RCA (White)
Video RCA (Yellow)
S-Video connection
Headphone socket
Please note
• See the external connections table on next page for available connections depending on the
size and model of your TV set.
• Do not use Video RCA and S-Video connections at the same time, otherwise they will effect
the picture each other.
AV1 scart
(External connections: (Rear)
AV2 scart
Aerial socket
Power cable
External speaker
connections, Loudspeaker
switch.
5
P- P+
V- V+

6
External connections table
STD
OPT
N/A
: Standard
: Optional
: Not available
Please note:
The Audio/Video RCA, S-Video and Headphone socket can be placed on the front panel
or on the right-hand side of the cabinet depending to the model of your TV.
123
4
7
AV
5
8
0
6
9
-/--
OK
TV/TX
MENU
PP
16:9
SWAP
MIX
UPDATE
SUB
HOLD
DOUBLE
REVEAL
P 100
Mute
Remote control
Picture tube
size/typee
20”
4:3
21”
4:3
25”
4:3
28”
4:3
28”
16:9
29”
4:3
32”
16:9
33”
4:3
AV1 Scart
AV2 Scart
Headphone
socket
Audio/Video
RCA
S-Video
socket
Ext. speaker
connections
STD. STD. STD. STD. STD. STD. STD. STD.
OPT. OPT. STD. STD. STD. STD. STD. STD.
OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT.
OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT.
OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT.
N/A N/A OPT. OPT. OPT. OPT. OPT. OPT.
24”
16:9
STD.
STD.
OPT.
OPT.
OPT.
OPT.

Using the TV
TV controls
Program selection
Press the Program up or Program
down buttons on the TV or remote
control or press a Numeric button
to select a program.
To select a program whose
number is greater than 9 using the
numeric buttons, press the -/--
button first and then press the two
Numeric buttons. For example, to
select program 12, press the -/--
button followed by1and then 2.
You can also select a program by
pressing in the OK button.
Press the OKbutton and a blue
box will appear on the screen
with program numbers on it.
Mute
To mute the sound press the Mute
button on the remote control. A
loudspeaker symbol will appear on
the screen.
Use the Program up and Program
down buttons to scroll through the
program numbers. When you
find the program number you want
press theOK button again.
Press theTVbutton to close the
blue box.
Volume
Press the Volume + or Volume -
button on the TV or the Vol or
Vol button on the remote control.
A sound level bar will appear on the
screen.
▲
▲
2 Scart models:
1 AV1 when using SCART socket 1.
2 AV2 when using SCART socket 2.
3 AV2-S for S-Video equipment. (Optional)
4 AV3 when using the RCA sockets
of the TV. (Optional)
5 AV3-S when using the S-video socket and
RCA audio sockets of the TV. (Optional)
Press theAV button to select your
input as follows:
Press the Mute button again to
restore the sound. The symbol
will disappear.
Pressing Volume up buttons
will also restore the sound.
But pressing the Volume down
button will decrease the volume
without restoring the sound.
Personal preference. Press the
PP button to revert to the
default settings for the TV.
(See TV setup).
Swap
SWAPSWAP
PR 01 PR 11 PR 01
Info
Press the P100 button and the
program number and program name
will be displayed for a few seconds.
AV
For use when you are connecting an external
source to your TV (Video recorder, DVD
player etc.) via the SCART sockets or RCA
sockets.
See ‘Connecting external equipment’.
1
-/--
1
2
OK
OK
TV/TX
AV
P 100
SWAP
PP
7
1 AV1 when using SCART socket 1.
2 AV2 when using the RCA sockets of the
TV. (Optional)
3 AV2-S when using the S-video socket and
RCA audio sockets of the TV. (Optional)
1 Scart models:
to go back to Program 1. Press it
again to return to Program 11.
Allows you to swap between the
program you are watching and the
last selected program. i.e. If you were
watching Program 1 and change to
Program 11, press theSwap button

8
In the Setup menu select PROG
NUMBER and change to 01 using
the Program down button to
select it and the Volume up
button to change it.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
The search arrow will flash and
the tuning indicator will move up
the scale.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Identify which channel you are
watching (BBC 1, ITV 1 etc.) and
decide which program number you
want it to be.
Press the AVbutton again to return
to TV.
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Please Note
If the TV is set to a channel with no signal the
TV will return to standby after 5 minutes.
The time remaining is displayed on the screen.
Manual tuning
Tuning the TV is accessed through the
SETUP menu.
There are two ways to access the SETUP
menu:
Press the blue Setup button. or
Press the Menu button and use the
Program down button to select
SETUP. Press the OK button to
enter the SETUP menu.
Use the Program down
button to
select PROGRAM NUMBER.
Use the Volume up/down
buttons
to select the program number.
Use the Program down button to
select Store. Press theOKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programs you want or the
television can receive.
MENU
OK
OK
AV
Please note
The system will display automatically on
SYSTEM row i.e.BG, L, I, DK depending
the receiving broadcasting system of the
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using Volume up/down buttons.
the TV will exit the menu system.
Please note
If you do not press any buttons for 15 seconds

9
Tuning with channel numbers
Enter the SETUP menu by pressing
the blue button.
Press the OK button to enter the
CHANNEL row.
Use the Program down/up buttons
to select “S” for cable channels and
“C” for terrestrial broadcast.
Use Volume up button to select
the channel number
Enter the channel number using
the Numeric or Volume up/down
buttons.
To exit the SETUP menu press the
TV button.
Automatic tuning (Autoprogram)
Enter the SETUP menu as before.
Use the Program down button to
select PROGRAM NUMBER.
Use the Volume up/down buttons
to select the program number.
Use the Program down button to
select STORE. Press theOKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and continue
the tuning procedure until you
have tuned in all the programs
you want or the television can
receive.
When you are sure the aerial is
connected properly press the OK
button. Autoprogam will start.
AUTOPROGRAM WORKING
will flash.
Use the Program down button to
select AUTOPROGRAM and
the OK button. A list of
countries will appear. Select
the desired country using
Program and Volume buttons.
press
To cancel Autoprogram while it is
working press the Menubutton
it will appear briefly on the screen
When Autoprogram has finished while
it puts will flash AUTOPROGRAM
SORTING whist it puts the
programs in order and name
them, then go to the first
program stored.
Press the OK button to exit the
channel row.
repetitively.
Fine tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
Please note:
If auto sort fails to arrange the programs
in the required sequence please refer to
program organizing.
In the SETUP menu use the
Program up/down buttons to
select FINE TUNING. Use the
Volume up and Volume down
buttons to fine tune.
When you have finished use the
Program down button to select
STORE and press the OK button.
OK
7
OK
OK
TV/TX
OK
MENU
OK
before the search continues.
Your TV is now tuned and ready to use.
As Autoprogram stores a channel

10
Program organizing
Once you have tuned in all the channels you
want, you can change their program
number, if required, and name them.
select PROGRAM EDIT and press
the OK button or press directly the
Yellow button.
PROGRAM 01 will be selected and the
channel stored under PROGRAM 01 will be
showing on the screen.
The details of the program will be shown
across the top of the screen i.e. P1 CH31.
The buttons used to edit the programs are
shown at the bottom of the display:
To enter the PROGRAM EDIT
menu press the Menu button and
Blue button - Name
Green button - Move
Pink button - Delete
Red button - Skip
To name the programs
Press theBlue button, the selected
line will turn blue and the CH will
be highlighted.
Use the Program up and Program
down buttons to select the letters
and numbers and the Volume up
and Volume down buttons to
move through the name.
Press the Blue button again to store
the name.
Repeat this process to name all the
programs.
Select the program you want to
move and press the
The program will turn to green.
Green button.
program will be deleted.
To skip programmes
Skipped programs will not appear
when you move through the program
list using the Program up/
Program down buttons.
They can still be selected using the
numeric buttons or the OK button.
Select the programs you want to
skip and press the Redbutton. The
program will turn red. To unskip the
program press the Redbutton again.
To exit the PROGRAM EDIT press
the TV button once or the Menu
button twice.
When you select a program, the
information you entered in the
PROGRAM EDIT menu will appear
All the following programs are
shifted down by one place.
To delete a program
To delete a program, select it and
press the Pink button. The
program will turn pink. Press the
Pink button again and the
All the following programs are
shifted up by one position.
on the top of the screen i.e. P1
BBC1. This will disappear after
about three seconds.
To move the programs
You can move the programs around the
program list to the order you want
Please Note
Some TV channels may send their
names with teletext transmission. In this
case their names will be automatically
shown on the name line.
Select the number you want to move
the program to and press the
Green button again and the
program will be moved to that
number.
MENU
OK
MENU
TV/TX

11
Volume
Sets default volume using the Volume up
and down buttons.
To save your settings, select
STOREand press the OKbutton.
will be displayed. Press
the Menu button to go back to
the previous menu.
Balance
Sets the sound balance when the
TVis in stereo mode using the
To save your settings, select
STORE and press the OKbutton.
will be displayed. Press
the Menu button to go back to the
previous menu.
Sound type
This item shows STEREO when receiving
stereo transmission and MONO for mono
transmissions.
TV set up
The TV set up is accessed through a menu
system.
Once you have stored your set up, this is the
set up the TV will default to when you switch
it on.
To enter the MAIN menu press the
Menu button.
Once in the MAIN menu use the
Program up and Program down
buttons to select items in the menu
and the OK to access sub menus
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Sound menu (red button)
or use the fastext buttons
for quick access.
Red button - SOUND
Green button - PICTURE
Pink button - FEATURES
Select the required item in the menu
using the Program up/down buttons
and make the changes pressing
Volume up/down buttons. Use the
OK button to enter EQUALIZER and
HEADPHONE sub menus.
If the channel you are watching
is in
Nicam stereo the On Screen Display
will show NICAM STEREO for a
while.
Please Note
If, while watching a nicam stereo channel,
the signal strength drops and the system
can not receive nicam stereo the OSD will
show MONO. If the signal strength
increases again and nicam stereo can be
received again, the OSD will show
NICAM STEREO.
The TV can be produced to receive the
NICAM broadcasts as a optional
feature.
menu.
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press the Menu
button to go back to the previous
Dual I/II
Some broadcasters supply the programs
in two languages. To able to listen the
second language select DUAL II by
SOUND TYPE using Volume up/down
buttons.
STORED
Volume up and down buttons
STORED
MENU
OK
OK
MENU
OK
MENU
OK
MENU

12
Sound mode
You can select NORMAL, SPATIAL or
DOLBY VIRTUAL (optional) using the
Volume up/down buttons.
SPATIAL sound is an ‘expanded stereo’. It
gives the impression that the two speakers in
the TV are further apart than they really are.
menu.
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press the Menu
button to go back to the previous
TV transmitters have different sound levels.
AVL
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
To supply this press Volume up or down
button and select ON for AVL.
menu.
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press the Menu
button to go back to the previous
In this menu are a series of preset equalizer
settings for different types of sound output.
There are four music settings - MUSIC,
SPORT, CINEMA and SPEECH and USER
mode.
USER allows you to set your own sound
output as follows:
Use the Program downbutton to
select USER.
Use the OK button to enter the
EQUALIZER menu.
To save your settings, press the OK
button. Press the Menu button to
go back to the previous menu.
sound Smart control.
You can change the equalizer setting
whist watching the TV using the
Press the sound Smart control to
page through the different equalizer
settings and select the one you
want.
Once you have switched the TV off
the equalizer setting will revert to the
stored setting.
Headphone
You can set up the volume, balance, bass,
treble and sound mode (stereo or mono).
Use OK button to enter the HEADPHONE
menu.
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press theMenu
button to go back to the previous
menu.
Equalizer
Use the Program up/down
buttons to make the changes.
Press OK button to adjust the
frequency band levels.
Use the Volume up button to select
the KHz column you want to
change.
“Virtual Dolby Surround sound is based on
Dolby Pro Logic decoding for the
reproduction of Left, Right, Centre and
Surround channels using two loudspeakers.
Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby
Laboratories.
To get the surround effects in “ Dolby Virtual”
mode, you must apply a Dolby Pro Logic
coded input to the TV. You can’t adjust the
AVL and EQUALIZER in DOLBY VIRTUAL
mode.
Please Note
OK
MENU
OK
MENU
OK
OK
OK
MENU
OK
MENU

13
When you have finished in the
Sound sub-menu select STORE and
press the OK button.
To exit the sub-menu press the
Menu button and return to the
main menu.
Picture menu (Green button)
The picture menu allows you to set up the
following:
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
To change, for example, the colour,
select it using Program buttons.
Use the Volume up and Volume
down buttons to change the setting.
To save your settings, select STORE
and press the OKbutton. STORED
will be displayed.
Smart cont.
This gives you a choice of picture type:
SOFT, NATURAL, RICH or USER.
Use the Program up and Program
down buttons to select the type of
picture you want. As you select each
one the TV picture will change to
that type.
USER allows you to set your own picture
type as follows:
Use the Program down button to
select USER.
Select BRIGHTNESS,
CONTRAST COLOUR and,
SHARPNESS using the Program
up/down buttons.
Change the settings with the
Volume up/down buttons.
To save your settings, select STORE
and press the OK button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.
You can change the picture type
while watching the TV using the
picture Smart control.
Press the picture Smart control to
page through the different picture
types and select the one you want.
Once you have switched the TV off
the picture type will revert to the
stored setting.
Feature Menu (Pink button)
OK
MENU
OK
OK
OK
MENU
PICTURE FORMAT
CHILD LOCK
SLEEP TIMER
ON TIMER
LANGUAGE
DYNAMIC BASS
SUBWOOFER
AUTO
OFF
OFF
OFF
OFF
ON

14
MIX
16:9
MENU
Picture format
This allows you to select the picture size on
corresponding to the screen type widescreen
of your TV:
Available formats for widesereen TV sets are
16:9, 4:3, zoom, Letterbox and Subtitle.
Available formats of 4:3 TV sets are 4:3 and
16:9.
4:3, conventional TV picture format.
L Box (Letter box), Useful for watching
video, some film formats and Pal-Plus
format.
Widescreen TV sets:
16:9, this is the screen format of widescreen
TV sets (28” SF/PF, 32” SF/PF).
The TV will automatically switch to this
format if it detects 16:9 format from the
SCART inputs.
Zoom, an enlarged 4:3 format retaining the
same aspect ratio.
If you cannot see subtitles supplied
by an external source at the bottom
of the screen, especially when
watching 4:3 pictures in Letter box
format press the Mixbutton.
4:3 Sets:
4:3, is the screen format of 20”, 21”, 25”,
28”, 29” and 33” TV sets But you can
change the picture format to 16:9 to able
to watch the inputs in 16:9 format, i.e.
some broadcasts and DVD’s.
Press the 16:9 button to page
through the different picture formats
and select the one you want. The
selected format will appear on the
lower left side of the screen for
a short while.
To exit the sub-menu press the
Menu button and return to the
main menu.
Once you have switched the TV off
the picture format will revert to the
stored setting.
The formats of the broadcasts (4:3 or 16:9)
you watch by means of aerial input are chosen
automatically. (4:3, 16:9 and Letterbox for
16:9 TV) This feature is active if the channel
you are watching sends WSS (Wide Screen
Signalling) information.
Note: The feature mentioned above is relevant
for TV sets having tele-text.
Child lock
Childlock switches off the program you are
watching when you select it. All other
programs are unaffected. If you go back to
the program with childlock on you will see
a black screen with the OSD showing
CHILD LOCK. You can lock as many
programs as you want.
Press the Volume up button to
switch the Child lock on or off.

15
Subwoofer (optional)
A subwoofer speaker can be fitted
within the TV case as an option
depending to the model.
By 33”(84cm) TV sets there
is an external subwoofer (optional)
to be fixed as shown below.
Select SUBWOOFER in FEATURES
menu,
Press the Volume up button to
switch the Subwoofer on or off.
Please Note
If you move the loudspeaker switch, on the
rear of the TV, to the external position, the
internal speakers in the TV will be switched
off but the Subwoofer will remain on if
switched on.
Setup menu (blue button)
Program edit menu (yellow button)
These two menus are explained under
‘Tuning the TV’.
Sleep timer
Allows you to preset the period of time
before the TV will switch off automatically.
Press the Volume up button to
increase the time period in 5 minute
steps from 5 minutes to a maximum
of 2 hours and to switch the sleep
timer off.
The countdown will start immediately.
To cancel the sleep timeselect OFF in
SLEEP TIMER row by using Volume
buttons.
Language
There are many languages available for the
On Screen Displays (OSD).
Press the OK button to select the
language list.
Press the Program down button to
page through all the languages and
OK to select.
Dynamic Bass (optional)
Set DYN BAS to ON if you wish to
deepen the bass sound specifically.
On TV sets with subwoofer if the
Dynamic Bass is turned ON
subwoofer will be turned on
automatically and cannot be changed
by user.
OK
OK
On Timer
Your TV set has a feature which allows the
TV to be turned on with your selected program
after a pre-selected period ranging from 5
minutes to 12 hours.
Press the "VIOLET" colour button.
Choose the AUTO ON line with “PR▲” or
“PR ” button.
Using number buttons enter the number of
the program that you wish the TV turns on.
You can choose one of the AV's instead of
the program number by pressing the "AV"
button. You can return to the program number
with TV/TXT button.
Using “VOL ” or “VOL ” button enter
the period after which your TV should turn
on automatically with 5 minutes steps. Your
TV will be turned on the selected program
automatically if it is in "stand-by" mode, or
will change over to the selected program at
the end of this period if it is "on" mode.

16
Teletext is an information system that displays
text on your TV screen. Using the teletext
control buttons you can view pages of
information that are listed in the teletext
index.
No on screen display is available in text mode.
The contrast, brightness and colour cannot be
changed but the volume control is still
available.
Make sure the TV channel you are watching
transmits teletext.
Press the button. The text
page will appear, normally the index
page.
Press the button. The TV
will return to the channel you were
watching.
Find the number of the page in the
index and enter it using the
buttons. The number of
the page will appear in the top left
hand corner of the screen.
The page counter will search for your
page. When it finds it, the page will
be displayed.
To move to the next page of text
press the button.
To move to the previous page press
the button.
To return to the index page press the
button.
To view a page of text while
watching a TV program press
button. The text will be
superimposed over the TV
program.
Press the
button again to return
to the text page.
In Text mode press theUpdate
button. The TV will return to TV
mode with the text page number in
the top left hand corner of the
screen.
Enter the page number you want
using the buttons.
The top line of the text page will
appear while the text searches for
your page. When the page is found
the number will remain in the top
left hand corner of the screen.
Press the button to view
your selected page of text.
If you have difficulty reading the
text on the TV you can double the
height of the text.
Press the button.
The top half of the page will be
displayed in double height text.
Press the button
again. The bottom half of the page
will be displayed in double height
text.
Press the button
again to return to the full page.
Using Teletext
Please Note
To enter Text mode
Please Note
To exit Text mode
To select a page of text
TV/text mix
Page search while watching TV
Double height text
TV/TEXT
TV/TXT
Numeric
Program up
Program down
P100
Mix
Mix
Numeric
Update
Double height
Double height
Double height
the
TV/TX
TV/TX
0
9
P 100
MIX
MIX
0
UPDATE
9
UPDATE
DOUBLE
DOUBLE
DOUBLE

17
Page hold
If the page of text you have selected
contains sub pages, these sub pages
will automatically be displayed in
order with a delay to allow you to
read the page.
To stop the move to the next sub
page press the Hold button. STOP
will appear in the top left hand
corner.
To continue moving through the sub
pages press the Hold button again.
To select a sub page
If the page of text you are viewing
contains sub pages, the number of
the sub page you are on and the total
number of sub pages is displayed on
the right of the screen i.e. 1/7.
To select a sub page press the Sub
button. The number in the top left
hand corner will be replaced by S
followed by 4 asterisks.
Enter the number of the sub page,
using the Numeric buttons in the
format S0001 for sub page 1.
The teletext will search for the sub
page. This may take some time. To
return to the TV while the teletext
is searching press the Update
button.
When the page number is found it
will appear in the top left hand
corner of the screen.
Press the Update button again to
view the text page.
To reveal information
Press the Rev button to reveal
concealed information (quiz
answers etc.).
Press the Rev button again to
conceal the information again.
Press the Sub button, while
watching a TV program , to
display the time.
Fastext
At the bottom of the teletext screen is a row
of subject headings in red, green yellow and
blue.
The remote control has a row of coloured
buttons corresponding to the row of
coloured subjects on the screen.
Pressing one of the coloured buttons will
take you directly to the page
corresponding to the subject heading.
HOLD
HOLD
SUB
5
UPDATE
UPDATE
REVEAL
REVEAL
SUB

18
You can connect a wide range of audio and
video equipment to your TV.
connectors.
Connecting external
equipment
Connecting a video
recorder
Plug one end of the SCART lead (not
supplied) into the back of the video recorder
and the other end into one of the SCART
sockets on the back of the TV.
Switch on the video recorder and the TV.
Press the AVbutton on the remote
control to select AV1 or AV2 to
correspond with SCART socket you
are using on the back of the TV.
External speakers (optional)
You can replace the two internal speakers
with external speakers (not supplied). The
speakers must have an impedance of 8 ohms.
Connect the speaker wires to the external
speaker connections on the rear of the TV.
Connect the negative wires to the black
connectors and the positive wires to the red
Put the Loudspeaker switch on the
back of the TV to the EXT position.
The internal speakers will be
switched off.
Please Note
Do not position the external loudspeakers
too close the TV as the magnets on the
speakers can upset the TV picture.
Headphones (optional)
The headphones must have an impedance of
between 8 and 32 ohms and have a 3.5 mm
stereo jack plug.
Plug the headphone jack into the headphone
socket of the TV.
Select the SOUND menu to set up the
headphones.
Via SCART
Make sure the TV and video recorder are
both switched off.
Make sure the TV and video recorder are
both switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
video recorder and plug the other end into
the video and audio in sockets of the TV.
If the sound is in mono use the Audio Input
L. In the SOUND menu select MONO.
Press the AV button repetitively
and select the AV3 mode by two
scart models or select AV2 mode
by one scart models.
Via RCA lead (optional)
R
+——
MAIN L+
AV
AV
Please note:
You can connect a RGB external equipment
via Scart 1. It is necessary to you use full
Scart cable for this purpose.
Select the video outputs of external device
by using its menu to RGB if it’s available.

19
If you have an S-Video player you can
connect it to SCART socket 2 (optional)
via an adaptor from scart to S-Video/RCA
audio (not supplied).
S-Video Player
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket of the TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
See ‘Tuning the TV’ and carry out the tuning
procedure for the video recorder test signal.
Select a program number 0 or between 55
and 99.
Press the AV button three times
to select AV-2S (available by two
scart models).
Press the AV button repetitively
to select AV3-S by two scart
models or AV2-S by one scart
models.
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
You can also connect it through the
S-Video socket of the TV (optional).
Via RCA lead and S-Video socket
R
L
MONO
VIDEO
AV3
Via aerial socket
Make sure the TV and video recorder are
both switched off.
Unplug the aerial lead from the TV and plug
it into the aerial socket on the video
recorder (if fitted).
AV
AV
R
L
MONO
VIDEO
AV3
S-Video In