Telesystem SMART24 SLIM12V User manual

TELE System
14
Dear Client,
Thank you for purchasing our product. We invite you to carefully read these instructions before using the
appliance. This way you can achieve optimal performance and maintain the original characteristics of
reliability over time. Keep this manual for future reference. We also suggest you keep the original TV
packaging. For any problem, remember to take note of the TV’s serial number which is on the back of the
device.
The TELE System staff.
WARNING!
The reception and viewing of digital TV channels depend on the level and quality of the antenna signal
(terrestrial/satellite) available. The signal varies depending on the area of residence, the correct
orientation/operation of the antenna system, the weather conditions and the peculiarities of the signal
transmitted by the television broadcaster.
Similarly, the use of audio-video streaming content in Smart/Connected TV mode (through appropriate IP
applications) depends on several factors, such as quality and speed of your internet connection and the
characteristics of the server/network of the service provider.
NOTE
TELE System Digital Srl communicates that, following any software and/or hardware changes aimed at
improving the product, there could be inconsistencies between the content of this manual and the
product in your possession.

SMART TV - ENGLISH
15
Index
1 Safety ...................................................................................................................................................... 1
2 Product description ................................................................................................................................. 2
2.1 Front .............................................................................................................................................. 2
2.2 Keyboard ....................................................................................................................................... 2
2.3 Connections ................................................................................................................................... 2
2.4 Remote control .............................................................................................................................. 3
2.4.1 Keys ....................................................................................................................................... 3
2.4.2 Batteries ............................................................................................................................... 3
3 First installation ...................................................................................................................................... 4
4 Main functions ........................................................................................................................................ 4
4.1 Digital TV mode ............................................................................................................................. 4
4.2 Source selection ............................................................................................................................ 5
4.3 Main menu .................................................................................................................................... 6
4.4 Smart (Home) mode ...................................................................................................................... 6
4.4.1 APPS selection ...................................................................................................................... 6
4.4.2 Settings section ..................................................................................................................... 6
5 Advanced functions ................................................................................................................................ 7
5.1 TV channels search ........................................................................................................................ 7
5.1.1 Terrestrial/Wire .................................................................................................................... 7
5.1.2 Satellite ................................................................................................................................. 7
5.2 Menu and channel protection ....................................................................................................... 9
5.3 Common menu .............................................................................................................................. 9
5.4 Factory reset (reset) ...................................................................................................................... 9
5.5 USB Media player .......................................................................................................................... 9
6 Technical specifications ........................................................................................................................ 11
7 Troubleshooting .................................................................................................................................... 12

SMART TV - ENGLISH
1
8 Safety
WARNING: TO REDUCE THE RISK OF SHOCK AND AVOID VOIDING THE WARRANTY, DO NOT REMOVE THE
BACK COVER OF THE DEVICE COVER!
Before connecting the power cable to the mains power supply outlet, make sure that the electric voltage
indicated on the appliance corresponds to the one used in your area.
Make sure that you install the power cord, and other connection cables sturdily and securely. Voltage
overloads and power extension cords can be dangerous, such as worn cables or broken plugs/sockets;
these conditions can cause electric shock or fire. Contact a trusted technician to replace damaged parts.
Do not insert any metallic object into the device – there is a risk of electric shock. To avoid electric
discharges do not touch internal parts of the device; only qualified personnel may open the television.
The television has slots for air circulation. To prevent overheating, these openings must not be covered
nor blocked. If you position the TV in confined spaces (in bookcases, furniture), make sure that there is
adequate ventilation.
Do not use the television in extreme temperatures, intensely humid areas or in dusty environments.
Recommended temperature: 5÷35°C. Relative humidity recommended: 30÷80RH.
Do not subject the TV to rain or splashes of water; do not install it near kitchens, swimming pools, etc.
Should water accidentally enter the television, immediately unplug the supply cord and contact a
technician.
If necessary, clean the LED screen with a soft cloth lightly moistened with water; remember to disconnect
the television before cleaning it. Do not use solvents such as benzene, acid or alcohol to clean the
television; the surface of the screen and the LED panel could be irreversibly damaged.
Position the device on a solid surface that preferably facilitates access to the power outlet.
Do not place the television near sources of heat or flames such as, for example, radiators, heaters and
candles. Do not place any objects filled with liquids such as vases or bottles on or near the TV.
The crossed-out trash bin symbol indicates that it is forbidden to disperse into the
environment or to throw it into the general municipal waste. Anyone who does not comply
with this rule will be fined in accordance with current legislation.
Proper disposal of the appliance helps avoid potential harm to the environment and human
health, as well as facilitate the recycling of the components and materials contained
therein, therefore saving energy and resources.
The manufacturer has established a recovery system for Waste from Electrical and Electronic Equipment
(WEEE) of the product which is subject to separate collection and treatment systems, using plants
conforming to the provisions in force in this matter.
Take the unusable product (and any accessories, including batteries) to a collection center authorized to
handle electrical and electronic equipment waste. Alternately, you can return your used or dead
equipment to the dealer when purchasing a new equivalent type of device or free of charge if the
household appliance is less than 25 cm in external dimensions.

TELE System
2
9 Product description
9.1 Front
In the lower front part of the TV, usually on the right (the position may vary depending on the model of
TV), there are the following adjacent components:
1. LED: LED status indicators: on (GREEN), standby (ROSSO) and remote-control operation (flashing
RED).
2. IR: Infrared sensor for the remote control.
9.2 Keyboard
The keyboard, normally located on the right side of the TV (the position may vary depending on the TV
model), includes the following function keys:
1. VOL+ e VOL-: audio volume regulation.
2. CH+ e CH-: previous/next channel change.
3. MENU: access the main menu.
4. SOURCE: input source selection/TV mode.
5. POWER: power on/turn off in Standby mode.
9.3 Connections
The following inputs and outputs are available behind the TV:
1. USB (x2): USB2.0 ports for connecting USB mass storage devices for multimedia playback (Media
player function).
2. Headphone: headphone output (3,5mm jack).
3. Mini YPbPr: Video Component input (YPbPr). Optional external adapter required.
4. Mini AV RCA: RCA Video/ Audio Stereo input. Optional external adapter required.
5. CI/CI+: housing for CI/CI + common interface modules.
6. COAXIAL: coaxial digital audio output.
7. HDMI1, HDMI2, HDMI3
3
: HDMI digital audio-video inputs (v.1.4) for connecting an external AV
source (e.g. a receiver or DVD player) equipped with an HDMI interface.
8. RF IN (T2/C): antenna input (IEC type) for receiving digital terrestrial (DVB-T / T2) or cable (DVB-C)
signal.
9. RF IN (S2): SATELLITE RF Antenna input (type F).
10. SCART
4
: analogue audio-video input for connecting an AV device with a RCA (CVBS + Stereo Audio)
interface.
11. PC VGA: video input (VGA) for connecting a Personal Computer.
12. LAN: Ethernet (RJ45) port for connection to the Internet, necessary for the Smart TV function.
13. Supply: integrated power cable for connecting the television to the 230VAC, 50Hz mains supply.
12V DC input for external AC adapter (for SMART24 SLIM12V model)
3
HDMI3 port is available only for SMART28 LS09 model
4
SCART port available only for SMART28 LS09 model

SMART TV - ENGLISH
3
9.4 Remote control
9.4.1 Keys
1. Power: power on/turn off in Standby.
2. HOME: recall the HOME menu (Smart/connected mode).
3. TV: direct access to TV mode
4. USB: direct access to MULTIMEDIA function (USB)
5. APP: direct access to the list of available applications.
6. 0÷9 numerical keys: direct selection of channels.
7. AUDIO: choose audio.
8. (Recall): return to the latest selected program.
9. MENU: recall the main MENU of the selected source.
10. Source: source selection.
11. Arrow Keys: navigation within the menu.
12. ENTER: confirm/select sub-menus/access to channels list.
13. EXIT: exit menu.
14. INFO: view information regarding the current AV content.
15. CH-/CH+: previous/next channel change.
16. (Mute): temporarily interrupts the audio.
17. ASPECT/MOUSE: choose image format / cursor activation in SMART
mode.
18. VOL-/VOL+: regulate audio volume.
19. Rewind / RED: rewind in USB mode
20. Fast forward / GREEN: Fast Forward function in USB mode
21. Back Skip / YELLOW: previous multimedia file
22. SKIP / BLUE: next multimedia file
23. TXT: teletext index.
24. STOP/ REVEAL: stop multimedia playback / teletext Reveal function.
25. Play&Pause/ FREEZE: start or pause media playback/ stop frame (TXT)
26. SUB.PG (Zoom): Teletext subpage
27. EPG/INDEX: access the TV electronic program guide / teletext index.
28. SUBTITLE/TIME: activation of subtitles (if available) / TXT Time function.
29. PICTURE: change video mode.
30. SOUND: change audio mode.
31. SLEEP: set the shutdown timer.
9.4.2 Batteries
You must insert the batteries (not supplied) when the product is purchased; it is instead necessary to
replace them once the remote control no longer works properly.
First open the appropriate cover on the back of the remote control. Then to replace the batteries,
introduce the 2 AAA batteries into the compartment respecting the correct polarity as indicated; instead,
to remove batteries, remove the dead batteries from the compartment and dispose of the batteries
separately from household waste and take them to any point of sale or collection.
WARNINGS
• To prevent corrosive liquid leakage from damaging the remote control, it is advisable to remove the
batteries if you believe you will not use the device for a long time.
• Avoid using different types of batteries such as new and used batteries at the same time.

TELE System
4
10 First installation
Before switching on the television, it is advisable to connect the aerial cable (terrestrial and/or satellite)
and the ethernet cable (if available). In this way, thanks to the installation wizard, you can start using your
Smart TV by performing a few simple steps briefly described below:
Step 1, Step 2, Step 3
After the welcome / start screen, the procedure requires the choice of the menu language, country of use
and time zone. Make your choices by moving the screen cursor with the ▼ arrow key on the remote
control to the desired value, then press the arrow key ► to continue.
Step 4
Section dedicated to the configuration of the TV connection to the Internet network necessary to use the
connected Smart / TV functions. If the Ethernet cable has already been connected to the TV's RJ45 port,
the connection to the home modem/router will take place automatically; otherwise, connect the Ethernet
cable and wait for the TV to connect to the network. Then go to the next step with the arrow key ► on the
remote control. If it is not possible to connect an Ethernet cable to the TV, configure the Wireless
connection using the arrow keys and ENTER on the remote control: select the item Use Wi-Fi network,
choose your own Wi-Fi network from the list of detected networks, type the correct network password
very carefully (press ENTER to bring up the virtual keyboard), then select the Connect item. Finally press
the arrow key ► to go to the next step.
Step 5
For some advanced functions, the supplied remote control does not allow full and easy use; in this regard,
there is a dedicated Android/iOS application available that will make your mobile device (smartphone or
tablet) a means to control your TV. To download the application, simply frame the QR code visible on the
screen with the appropriate QR/video camera of your mobile device, then proceed with the installation.
ATTENTION!
• Make sure that your mobile device and Smart TV are connected to the same home data network.
• The application does not totally replace the traditional remote control, it is mainly designed to
control the Smart features of the TV (applications, media player, etc. ...)
• Some IP applications require the use of a keyboard and/or a cursor/mouse; in this case, the
traditional remote control supplied with the TV is not sufficient to control them.
Step 6
The last step in the configuration wizard asks you to choose the user's favorite mode / source. In
particular, by choosing TV, your product will initially start in traditional TV mode to allow the scanning and
therefore the viewing of television, terrestrial and / or satellite channels (see section 4.1). By choosing the
Home item instead, the TV will initially start in Smart TV mode to have quick access to
applications/browsers typical of a TV connected to the Internet (see section 4.4).
11 Main functions
11.1 Digital TV mode
At the end of the installation wizard (Section 3), if you have selected the TV mode, you need to scan a
digital TV channel. To access the Channel menu, set the Antenna Type between Digital Terrestrial (DVB-T /
T2), Cable (DVB-C) or Digital Satellite (DVB-S / S2), make sure that the corresponding antenna cable is
correctly connected, define the search parameters and proceed with the scan (see section 5.1).

SMART TV - ENGLISH
5
If you opt for automatic scanning of digital TV, the TV will propose that you upload a list of Italian satellite
default channels with a typical arrangement of the TivùSat platform channels.
NOTE
• The viewing of the encrypted TivùSat channels requires the use of a dedicated conditional access
module (CAM) and card (Smart-card), to be purchased separately.
• Due to frequent satellite channel updates, the default satellite channel list may contain obsolete
channels and may not coincide exactly with the TivùSat channel list.
Once the selected frequencies have been scanned, the TV will create the channel list with the defined
arrangement (e.g. the LCN one, corresponding to the numbering requested by the terrestrial channel
issuers).
If you want to proceed with the scanning of different input/antenna channels, proceed as described above
choosing the corresponding type of antenna desired (different from the previous one).
The different available channel lists will then be available only if the TV is in the correct TV section
(terrestrial/cable/satellite). In particular, to switch from viewing a terrestrial channel to a satellite channel,
press the MENU button, enter the Channel menu and set Digital SAT (satellite) as Antenna Type. Obviously
to return to the terrestrial channel list, set Digital terrestrial as Antenna Type.
The TV will create a channel list with the defined ordering (e.g. the LCN one, corresponding to the
numbering requested by the terrestrial channel broadcasters) once TV has scanned the frequencies.
If you want to scan channels from a different input/antenna, then proceed as just described above by
selecting the corresponding Antenna type (a different one from the previous).
The various available channels list will then be accessible only if the TV is in the correct TV section
(terrestrial/cable/ satellite). In particular, to switch from viewing a terrestrial channel to a satellite
channel, press the MENU button, enter the Channel menu, and set the Antenna Type to Digital SAT
(satellite). If you want to return to the terrestrial channel list, set the Antenna Type back to Digital
terrestrial.
11.2 Source selection
If the television is in Smart/TV mode (HOME menu), you can select the TV's operating mode/input source
in the Source section (the next to last entry in the Home menu). Otherwise, in all other modes, use the
SOURCE button or follow the path MENU> Input. Then, choose between:
1. TV: to activate the digital TV mode (terrestrial/cable/satellite) and therefore allow reception of the
respective programs.
2. AV(1): to activate the RCA analog audio-video input.
3. YPbPr(1): to activate the YPbPr component video input.
4. SCART(2): to activate the SCART analog audio-video input.
5. VGA(2): to activate PC mode, from VGA video input and AUDIO IN PC.
6. HDMI 1/HDMI 2/HDMI 3(2): to activate the corresponding HDMI 1/2/3 digital audio-video input.
NOTE
(1) Cable-adapter required not included in the supplied accessories.
(2) Audio-video connection cable not included among the supplied accessories.
NOTE
SOURCE list may change based on the TV model (please refer to Technical specifications)

TELE System
6
11.3 Main menu
From TV source (or from audio-video inputs), press the MENU button to display the main menu and use
the
t
/
u
arrow buttons to navigate through the menu titles. Press the ENTER button to confirm your
selection, MENU to return to the previous menu or EXIT to exit
The submenus are:
1. Home: access to connected Smart / TV mode (see section 4.4).
2. Input: input source selection (external audio-video device) or TV mode (see section 4.2).
3. Image: adjustment of the image features on the screen.
4. Audio: configuration of the audio features.
5. Channel (available only in TV mode): for channel management, in particular to access different types
of digital TV, terrestrial/cable/satellite channels (section 4.1) and the corresponding channel search
(see section 5.1).
6. System Lock (only available in TV mode): channel protection settings and menus (see section 5.2).
7. Config. timer: settings for the display duration of the on-screen menu (OSD), the TV automatic
switch-off in standby mode and the activation of the Sleep timer.
8. Common: access to some additional settings. In particular, in TV mode you can also change
preferences on languages such as teletext, audio and subtitles. Refer to the section 5.3.
11.4 Smart (Home) mode
The Home menu, also directly accessible from the HOME key on the remote control, mainly allows access
to the so-called Smart section (connected component/IP) to manage and use the IP applications and the
browser for navigation, as well as access to the various sources of input/mode.
11.4.1 APPS selection
Moving to the APPS section of the Home menu, you can see the list of all IP applications installed under
the Application List (accessible directly from the APP button on the remote control), where you can also
access the application store to download and install new ones.
The Multimedia submenu on the other hand allows access to the Multimedia player function (Media
player), to reproduce multimedia audio/video contents saved on an external USB memory device (see
section 5.5) or to manage files saved in the internal TV storage (e.g. installation of APK expert users, a
procedure recommended only for expert users).
11.4.2 Settings section
The submenu to configure the connection to the Internet (via LAN cable or via Wi-Fi) is particularly
important. This submenu is essential to use the connected Smart/TV functions and can be reached from
the path: Home Menu> Settings> Other Settings > Network. It is useful if you want to change the network
settings defined during initial installation (see section 3). In the Other Settings menu, you will also find:
Time settings submenu to adjust the time and related parameters, the Common Settings submenu for
general changes such as language, keyboard type, permissions/account management and finally the Info
submenu to consult technical system information such as the MAC addresses of the Ethernet/LAN and Wi-
Fi interfaces.

SMART TV - ENGLISH
7
12 Advanced functions
12.1 TV channels search
To perform a channel scan, press the MENU key and access the Channels menu, from which you will have
to define the Country where the TV is installed should it be a different one than the one chosen during the
initial installation (section 3), and choose the Antenna Type desired between:
1. Digital terrestrial: to search for channels broadcast in terrestrial digital (DVB-T / T2),
2. DVB-C: to search for channels broadcast by cable (DVB-C),
3. Digital SAT: to search for satellite broadcast channels (DVB-S / S2).
Depending on the Antenna Type selected, the Channels menu items change and then the corresponding
channel search procedure as described in the following paragraphs.
WARNINGS
• Make sure that the chosen antenna cable is properly connected to the corresponding antenna input
of the TV.
• If you re-scan automatic channels, the list of previously memorized channels will be totally
eliminated and replaced by the one generated by the new search.
12.1.1 Terrestrial/Wire
From the Channel menu, select Terrestrial Digital as the Antenna Type. Subsequently, to perform an
automatic channel search move to the Automatic scan submenu and confirm the start with the ENTER key
on the Start scan item. Instead, to scan on a single frequency, go to the Manual Scan submenu, define the
desired search parameters (channel/frequency) and confirm the start of the scan by pressing the ENTER
key on the Start scan item.
Following similar steps to those described above, it is possible to search for digital channels transmitted by
cable choosing DVB-C as Antenna type in the Channel menu.
NOTE
• At any time, you can press EXIT to finish the search in progress.
• Cable transmission (DVB-C) is not normally used in Italy. Therefore, avoid selecting it when searching
for channels with a digital terrestrial antenna system.
12.1.2 Satellite
To activate the reception/viewing mode of the digital satellite channels, activate the corresponding TV
mode: press MENU, select the CHANNEL sub-menu and select Digital SAT.
If the satellite channels have not already been memorized, you must first configure the parameters of the
satellite antenna system in use (see section 5.1.2.1), then proceed to the channel scan (see section
5.1.2.2).
12.1.2.1 Antenna system configuration
The factory settings provide that the satellite system can receive signals simultaneously from 2 satellites
via DiSEqC switch, HotBird 13° East in first position and Astra 19.2° East in second position. If the system
does not correspond to the settings indicated, it is necessary to modify the default settings to make them
consistent with the satellite dish used.
NOTES AND WARNINGS

TELE System
8
• The TV is compatible with single universal, multi-satellite DiSEqC 1.0 and multi-user SCR/Uni-cable
systems. Motorized antennas (DiSEqC 1.2 and USALS) are not supported.
• Incorrect antenna configuration may result in some or all channels not being loaded. If you do not
know the characteristics of your antenna system and/or you are not able to configure the receiver
yourself, it is advisable to contact a trusted professional installer.
• The Signal and Quality Level indicators refer to the transponder of the selected satellite indicated on
the screen. Make sure that it is valid/updated and actually active.
• It is not recommended to avoid connecting the TV to the satellite signal through the pass-through
antenna connector (LNB Out / Loop Through) of an external satellite receiver as both devices cannot
operate simultaneously. When the TV is switched on, the receiver must be in standby (with the tuner
not powered) and vice versa.
The following are the general steps to follow when setting typical antenna systems installed in Italy. In the
Channel Menu> Scan you can define the type of antenna by changing the parameter LNB type. Its possible
values are:
1. LNB Only: single satellite and single user,
2. DiSEqC: multi-satellite with DiSEqC 1.0 switch (up to 4 satellites),
3. SatCR: multi-user on a single-cable SCR / Unicable.
Single system
In the case of a classic single antenna satellite system with single universal converter (Low Noise Block -
LNB), set LNB type on LNB Only, choose the satellite to which the antenna is pointed (default HotBird 13°
East).
DiSEqC system
For multi-satellite antenna systems with signal distribution via DiSEqC 1.0 protocol (up to 4 satellites), set
DiSEqC first as LNB type, then associate the correct position through the parameters called DiSEqC
A/B/C/D to each satellite of the plant, respecting the relative physical connection of the antenna to the
DiSEqC switch.
SCR/Uni-cable system
For single-converter antenna systems with SCR/Uni-cable technology for satellite signal distribution over
multiple points of use (receivers) via a single cable, set SatCR as LNB Type and press ENTER on Position A.
Make sure the Satellite parameter carries the name of the desired satellite (otherwise change it), then
press ENTER on Satellite Configuration and define:
1. SatCR IF Channel: the user number corresponding to the SCR (or band) channel assigned to the
television connected to the antenna.
2. SatCR IF Freq.: the central frequency of the above SCR channel (band) assigned to the user. Typical
values for correct interfacing with other receivers/tuners are:
Canale SCR
1
2
3
4
Freq. SCR
1210
1420
1680
2040
WARNINGS
• Each TV / receiver connected to the same system must use a different SCR channel.
• For the connection of several receivers to a SCR system, do not use any loop-through antenna
connection of an external satellite receiver, but use a dedicated external signal splitter.
12.1.2.2 Channels search
Go to the Channel> Scan menu. To run a scan on all the available transponders (frequencies) of the set
satellite(s), select Auto Scan and press ENTER. Refer also to par. 4.1 to load the default channel list.

SMART TV - ENGLISH
9
Alternatively, to reduce the channel search to a single transponder (frequency) of a satellite, choose the
Manual Scan submenu, where you can also add and/or edit the transponder data, then press ENTER on
Start scan to operate the search.
12.2 Menu and channel protection
The System Lock menu is password protected; to access it, you need to enter the system password (PIN)
default 0 0 0 0. The following functions are available:
Change password: allows you to change the defined previously password.
WARNING
Write down and keep the new code in a safe place. If you forget it, use the universal code 4 7 1 1,
with which you can access the Change Password sub-menu again and then set a new password.
Lock system: If enabled, access to the Channels menu is protected by a password and the two
additional checks listed below are also enabled.
Parental control (available only in TV mode): to control the vision of some sensitive events,
commonly called Parental Control. In particular, if the tuned channel transmits an event with
information viewing protection for an audience of the same age and above the chosen age level, the
TV will block the channel. The channel unlock request will then be shown on the screen by entering
the PIN code.
Keyboard block: once enabled, the physical keyboard of the TV set (section 2.2) will be disabled and
the user will be able to interact with the TV only through the remote control.
Hotel Function
The TV has an additional feature called hotel security and customization. It lets you disable certain menus
and functions or authorize access though a password. To display the hidden menu Hotel mode and
enable/disable and customize it, sequentially press MENU 7 9 0 6 on the remote control.
12.3 Common menu
From this menu you can activate the HDMI CEC function to control, via HDMI, some functions of a CEC
compatible external device (for advanced users only) on the TV remote control, set the preferred audio
and subtitle languages for TV channels and, in addition, restore the initial settings of only those
parameters available on the menu (without deleting the channels list).
12.4 Factory reset (reset)
It is possible to reset the entire television, returning all the settings to the initial condition. To do so, select
Settings> Reset in the Home menu (connected Smart/TV mode) and confirm. Another way to do this is:
Home> Settings> Other Settings > Common Settings> System Restore.
WARNING
Restoring the factory settings deletes all the customizations made by the user, including stored channels,
downloaded applications and changed settings. Furthermore, by confirming the reset, the TV will perform
a complete system rebook and then display the first installation wizard on the screen (section 3).
12.5 USB Media player
In the Home menu (Smart/TV mode connected) you can access the APPS>Multimedia section related to
the Multimedia Player function, which displays/plays personal multimedia files contained in the TV's
internal memory (for expert users only) or in a USB type memory device connected to the USB input of the
TV.

TELE System
10
NOTE
• It is not recommended to avoid using/occupying the TV's internal memory in order to conserve
system resources and space for IP applications.
• Compatibility with all FAT32 or NTFS formatted USB 2.0 memory devices and all types of
codecs/multimedia formats available on the market is not guaranteed.
• Removing the memory device while writing or reading data can damage the contents and devices
involved; always switch off the TV before disconnecting the memory.
Once you’ve selected the file type (video/music/photo), only the files of the chosen type and recognized as
valid by the TV will be shown on the screen. Navigate through folders and files using the arrow keys ◄ / ►
/ ▼ / ▲ and ENTER on the remote control, and finally confirm with ENTER once you’re positioned on the
name of the file to be played.
During playback, you can manage the content with the usual multimedia function keys: 12 (Play / Pause), 3
(Stop), 5 (Fast Reverse), 6 (Fast Forward), 7 (Previous) and 8 (Next). Instead, press in sequence the
SUBTITLE key to enable/change any subtitles for a video (the file containing the external subtitles must be
named exactly like the video file). In addition, pressing the MENU button allows you to recall all the
settings/functions available for the current media file type.

SMART TV - ENGLISH
11
13 Technical specifications
Model
SMART24 SLIM12V
SMART28 LS09
Panel
Format
23,6” – 16:9 wide (59,9cm)
27,5” - 16:9 wide (69,8cm)
Resolution
1366 x 768 (HD ready)
Contrast
3000:1
Brightness
180 (cd/m2)
Viewing angle
178°/178° (Horizontal/Vertical)
Inputs
Component
x1 - YPbPr (adaptor not included)
HDMI (1)
x 2
x 3
SCART
-
x1 - CVBS e RGB
A/V in
x1 – CVBS + Audio LR (adaptor not included)
USB
x2 - USBv2.0, compatible FAT32e NTFS, Media player function
VGA
x1 - DSUB15
LAN
x1 - RJ45, Ethernet 10/100
TV Signals
RF input (DTT)
x1- 75 Ω, type IEC, VHF/UHF 7MHz/8MHz
RF input (SAT)
x1 - 75 Ω, F type
Common Interface
x1 - CI / CI+
Video
MPEG-2, MPEG-4, H.265.Main@L4.1-1920*1080@50fps
Audio (2)
MPEG-1 layer 1/2, MPEG-2 layer 2/Dolby AC3 H.265
Speaker
5 Watt x2
General
Power Supply
100÷240V, 50/60Hz
Energy Consumption
<0,5W in Standby
36 W max
<0,5W in Standby
40W max
Supported Formats
via USB
AVI/MP4/MKV
Wi-Fi
IEEE b/g/n, 2,4GHz
TV
dimensions
(WxHxD)
with supports
500 x 323 x 132 mm
643 x 420 x 200 mm
without supports
500 x 295 x 45 mm
643 x 387 x 87 mm
Standard wall bracket
VESA 100
Included Accessories
Standard remote control, AC
adapter, instruction manual
Standard remote control,
instruction manual
(1) The terms HDMI and High-Definition Multimedia Interface HDMI and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
(2) Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

TELE System
12
14 Troubleshooting
Problems
Possible Causes
What to do
The On / Standby LED on
the front panel of the TV is
not lit.
The power cord is not connected
to the electrical outlet.
Make sure the TV is properly
powered, then press the
q
key on
the TV or remote control to turn
it on.
No Audio/Video signal
The antenna signal is absent or
weak.
Check the antenna configuration
and the presence of the menu
signal (Section. 5.1).
The tuned channel is not
broadcasting or is obsolete.
Change channel and / or perform
a new channel search (Section
5.1).
The audio-video cable (e.g. HDMI,
SCART, etc.) is not connected
correctly or is faulty.
Check the audio-video connection
and the operation of the
corresponding cable.
The video resolution of an
external device connected via
HDMI is not compatible with that
of the TV screen.
Properly adjust the resolution of
the video output of the external
HDMI device.
Low or mute audio volume.
Increase the audio volume level
of the TV and/or external AV
device connected to the TV.
TV is not switched to the correct
audio-video input or mode.
Select the desired TV source
correctly (section 4.2).
The channels are not
loading.
Antenna signal absent or weak.
Check the antenna setting and
the presence of a signal (section
5.1).
The selected transponder/
frequency is obsolete.
Choose a valid transponder/
frequency.
The desired channel transponder
is not present in the database or
is not updated.
Add or update the transponder
manually.
Network error / no internet
connection
The TV is not connected to the
network.
Check the Ethernet or Wi-Fi
connection. See also Step 4 of
section 3.
Settings made in the menus
have not been memorized.
Failure to confirm after changing
settings.
Confirm each change by pressing
the final save button.

SMART TV - ENGLISH
13
Problems
Possible Causes
What to do
The remote control does
not work.
The remote control is not
properly aimed at the TV.
Check that there are no obstacles
between the remote control and
the front IR sensor of the TV.
The batteries are dead.
Replace the batteries (section
2.4.2).
The remote control has dropped
and the internal components
have been damaged.
Contact your dealer to purchase a
new remote control.
Program information is not
displayed.
The selected program does not
transmit information about the
event.
The receiver's time is not set
correctly.
Make sure you have selected the
correct Country and Time Zone in
the first installation (section 3).
The TV does not respond to
the buttons on the remote
control or the front keypad.
Temporary lock of the TV.
Unplug the TV from the electrical
outlet and reconnect it after a
while.
Problems with the remote
control.
Check the suggestions relating to
the remote control of this table.
USB memory is not
recognized.
USB memory not properly
formatted.
Format the memory with File
System FAT32 or NTFS.
USB memory not compatible.
Try another USB memory or use
the external power supply of the
disc.
The only USB port on the TV is
not enough to power the
memory.
Multimedia content is not
recognized.
File format and / or type of non-
compatible audio-video codecs.
Use only TV-compatible files and
codecs.
The PIN has been forgotten.
See section 5.2.
The TV turns off by itself.
Automatic switch-off activated
See the settings on the Config.
Timer menu.
WARNING
Generally, in the event of the TV’s anomalous behavior, a complete restart of the system (remove the plug
and restore power to the TV after about ten seconds) or a factory reset via the Factory reset (section. 5.4)
can help to solve the problem.

Televisore LED SMART DVB-T/T2 DVB-S/S2 HEVC
TELE System SMART24 SLIM12V
Codice Prodotto 28000156
Dichiarazione di Conformità EU
Tele System Digital dichiara sotto la propria
responsabilità che questo prodotto soddisfa i
requisiti fondamentali delle direttive europee,
rispettando le normative tecniche elencate.
TELE System SMART28 LS09 T2S2HEVC
Codice Prodotto 28000152
EU Declaration of Conformity
Tele System Digital declares, under its own
responsibility, that this product meets the
essential requirements of European directives, in
accordance with the listed technical standards.
2014/53/EU (Radio Equipment Directive - RED)
2014/30/EU (Electromagnetic Compatibility - EMC)
2014/35/EU (Low Voltage Directive - LVD)
2009/125/EC (Energy related Product - ErP) reg. 642/2009 e 801/2013
RED
LVD
EN 60065:2014+A11:2017
EMC
EN 55032: 2015
EN 55035: 2017
EN 61000-3-2:2014
EN 61000-3-3:2013
ETSI EN 301 489-17 V3.1.1 (2017-02)
ETSI EN 301 489-1 V2.1.1 (2017-02)
Radio
ETSI EN 300 328 V2.1.1 (2016-11)
Health
EN 62311:2008
Terrestial
ETSI EN 303 340 V1.1.2 (2016-09)
Satellite
ETSI EN 303 372-2 v1.1.1 (2016-04)
Tutta la documentazione a supporto della
Conformità rispetto alle direttive e al decreto citato
è disponibile presso TELE System Digital Srl.
All documentation to support compliance with
directives and Decree cited is available at TELE
System Digital Srl.
Bressanvido, 21/09/2018
Flavio De Poli
Amministratore Delegato
ITALIA
TELE System Digital S.r.l.
Via dell’Artigianato, 35
36050 Bressanvido (VI)
Internet: www.telesystem-world.com
Rev.03 23/04/2019