TERMA INCLUSIVE MARBLE RUN User manual

INCLUSIVE MARBLE RUN PLAY PANEL
USER GUIDE
V.1.0.2022

0
V.1.0.2021
1. INTRODUCTION
Thank you for choosing our product! We believe you would be satisfied using our Inclusive Marble Run
Play Panel.
Inclusive Marble Run Play Panel combines outdoor fun with therapy. Device aims to integrate non-
disabled people and those with disabilities (using wheelchairs), giving them possibility of playing together.
Besides inclusive purpose TERMA Inclusive Marble Run Play Panel provides kinesiotherapy and social
rehabilitation. The device complies with PN-EN 1176 standard.
The device complies with the premise of universal design, which provides ideas of accessibility to all
potential users, physically able-bodied, and with movement impairments.
TERMA Inclusive Marble Run Play Panel is dedicated to be used outdoor, at such a places as outdoor
gyms, parks, accessible recreation areas, private gardens.
The following User Guide provides all instructions refer to correct installation process, safe use and
exploitation of the device.
The Manufacturer reserves the right to change the contents of the User Guide. The updated version of
the User Guide could be downloaded from the Manufacturer's website www.termamed.pl at the
"Download" section.
Manufacturer:
Terma Sp. z o. o
80-298 Gdańsk
Czaple 100
T: [phone]
email : [email protected]
www.termamed.pl

1
V.1.0.R1.2020
2. DEVICE STRUCTURE
Materials:
Inclusive Marble Run Play Panel is made of the following materials:
Construction: steel profile with epoxy primer, powder coated
Front: HDPE board, 12 mm thick
Foundation: concrete class min. B-15
Dimensions:
Device external dimensions: 1670 x 1420 x 188 mm
Total height of the device measured from the ground level: 1470 mm
The distance of the board from the ground level: 701 mm
Other dimensions of the device:
Free fall height: none
Weight (without foundation): 45 kg
The outer diameter of the frame profile section: fi 40
Safety area dimensions: 1500 mm from each edge of the device
Foundation depth: 540 mm
Number of the rolling elements: 2
Diameter of the main profile:
40
Dimension of the longest element: Main construction: 1670 x 1420 x 188 mm
The weight of the heaviest element: Main construction: 45 kg

2
V.1.0.R1.2020
Ground level

3
V.1.0.R1.2020
Inclusive Marble Run Play Panel consists of the following elements:
No
Component
Quantity
[pcs.]
Figure
1
Main construction
1

4
V.1.0.R1.2020
3. INSTALLATION
To ensure the highest level of safety standards for users and caregivers, it is necessary to read and follow
the steps of installation sequence, assembly quality and safety instructions below.
TERMA Inclusive Marble Run Play Panel is dedicated to be installed on a playground. This device
complies with the EN 1176-1 : 2017 standard.
Ensure a comfortable and safe entry for wheelchair access to the device. No shock-absorbing surface is
required around the TERMA Inclusive Marble Run Play Panel. The rigid surfaces are recommended for
wheelchair access. Loose surfaces such as sand or crushed stone are excluded, grass surfaces are not
recommended.
The surface around the device should also not allow the foundations of the structure to be exposed (e.g.
no loose surface such as sand or gravel should be used).
2
Foundation block
(optionally)
1
3
Foundation pin
M10x300
4
4
Nut M10
DIN EN ISO 4032
12
The safety zone cannot overlap the other devices safety zones and the traffic routes!

5
V.1.0.R1.2020
Fig. Safety area
The foundation block should be permanently attached to the ground. Foundations should be at a depth of
min. 200 mm below the ground level.

6
V.1.0.R1.2020
Ground level

7
V.1.0.R1.2020
4. ASSEMBLY
Place of installation
TERMA Inclusive Marble Run Play Panel is designed to be installed in the playground. The safety zone
shall be defined around the equipment which is 150 cm from each edge of the device. The safety zone of
the Inclusive Marble Run Play Panel cannot overlap the other devices safety zones and the traffic routes.
No shock-absorbing surface is not required around the TERMA Inclusive Marble Run Play Panel, but a
wheelchair user must have an easy access.
Tools needed for assembly:
Spade 2 pieces
Rake 1 piece
Spirit level 0, 5 rm 1 piece
17 open-ended or socket wrench 1 piece
Measure 3m 1 piece
Chemical anchor Fischer FIS VL 410 C or Tytan EVOLUTION II 1 pack of 410 ml
Loctite 243 Adhesive 1 pack of 10 ml
Hammer drill with a drill fi 12 min drilling length 180mm
WARNING! The manufacturer does not provide any tools for assembly!
Two people are needed to assemble the TERMA Inclusive Marble Run Play Panel.
To ensure the comfortable and safe access for wheelchair users the rigid surfaces
are recommended. Loose surfaces such as sand or crushed stones are excluded,
grass surfaces are not recommended.
It is forbidden to install the device in geologically unfavorable conditions, i.e. in a
boggy or loose ground causing subsidence of foundations or in a ground where
water appears after the excavation has been made. Geological conditions should
be regulated prior to installation (effective drainage).

8
V.1.0.R1.2020
Next steps of assembly:
1. Digging a hole for a concrete screed or a block
2. Placing the foundation and drilling holes for the pins
3. Placing the pins in the foundation
4. Installing the device on foundation pins
5. Filling the foundations
1. Digging the hole for a concrete screed or concrete block
Tools:
Shovel / spade
Measure 3 meters
There are two options for installing the device in the ground.
Option 1:
Dig holes according to the following drawings. Pour dug holes with B-15 concrete class and wait until it
sets. Go to step 4, to find out how to proceed.
Option 2:
If the device was purchased in a set with concrete cubes, the holes should be dug in accordance with the
drawings below, next the cubes should be placed in the ground, level and check the dimensions, and then
sprinkle with earth to prevent the concrete cubes from moving.