Theora Care Connect User manual
Charge the Wearable – the watch will tell you
when it’s seated correctly on the charger and
charging. LED light will glow red.
Locate the Watch Phone Number – Located
on the back of this guide.
TheoraWearableConnect™
Power on the Wearable Watch – Press and
hold button 20 seconds. Make sure to leave off
the charging cradle.
Adjust the Wristband – The wristband should
be snug, but not tight.
1
2
3
4
LED Button
Green: Fully charged Yellow: Not on correctly Red: < 97% charged
On/Off Button
SOS Button – Care
recipients can send SOS to
primary caregiver by
clicking on SOS button and
holding until circle on
watchface is complete
Adjustable Wristband –
To resize, lift up on the
wristband and disengage
the hook, then slide the
band in or out
Magnetic Charging
Station – Face SOS button
up, align pins with watch
back. Charger will audibly
tell you the device is now
charging (unless the
battery is fully dead) and
when you remove watch
from cradle it will say if it is
fully charged or not. Takes
2-3 hours to fully charge.
Copyright 2021 Clairvoyant Networks, Inc.
Quick Start Guide
Smartphone AppTheora Link™
Download the App on Primary’s Phone
Apple iOS®: TheoraCare.com/TheoraLinkApple
Android™: TheoraCare.com/TheoraLinkAndroid
1
Click “Create Account” and Follow Prompts
with Primary’s Information
2
Open Verification Email from Primary’s
Smartphone
3
Don’t forget to check your spam/junk mail folder
Before you begin:
Note: The primary caregiver should be the one to connect
the watch
This must be done on the Primary’s smartphone, not
a desktop
Tap on “confirm email”
Note: If it does not connect you back to app, reopen app
& “sign in” with email and password
Scan the QR code below or visit our website
www.theoracare.com/resources
for helpful step-by-step videos
If you have any questions, about your new Theora Connect,
please contact us at
We’re here to help.
Charge the Wearable – the watch will tell you
when it’s seated correctly on the charger and
charging. LED light will glow red.
Locate the Watch Phone Number – Located
on the back of this guide.
TheoraWearableConnect™
Power on the Wearable Watch – Press and
hold button 20 seconds. Make sure to leave off
the charging cradle.
Adjust the Wristband – The wristband should
be snug, but not tight.
1
2
3
4
LED Button
Green: Fully charged Yellow: Not on correctly Red: < 97% charged
On/Off Button
SOS Button – Care
recipients can send SOS to
primary caregiver by
clicking on SOS button and
holding until circle on
watchface is complete
Adjustable Wristband –
To resize, lift up on the
wristband and disengage
the hook, then slide the
band in or out
Magnetic Charging
Station – Face SOS button
up, align pins with watch
back. Charger will audibly
tell you the device is now
charging (unless the
battery is fully dead) and
when you remove watch
from cradle it will say if it is
fully charged or not. Takes
2-3 hours to fully charge.
Copyright 2021 Clairvoyant Networks, Inc.
Quick Start Guide
Smartphone AppTheora Link™
Download the App on Primary’s Phone
Apple iOS®: TheoraCare.com/TheoraLinkApple
Android™: TheoraCare.com/TheoraLinkAndroid
1
Click “Create Account” and Follow Prompts
with Primary’s Information
2
Open Verification Email from Primary’s
Smartphone
3
Don’t forget to check your spam/junk mail folder
Before you begin:
Note: The primary caregiver should be the one to connect
the watch
This must be done on the Primary’s smartphone, not
a desktop
Tap on “confirm email”
Note: If it does not connect you back to app, reopen app
& “sign in” with email and password
Scan the QR code below or visit our website
www.theoracare.com/resources
for helpful step-by-step videos
If you have any questions, about your new Theora Connect,
please contact us at
We’re here to help.
Charge the Wearable – the watch will tell you
when it’s seated correctly on the charger and
charging. LED light will glow red.
Locate the Watch Phone Number – Located
on the back of this guide.
TheoraWearableConnect™
Power on the Wearable Watch – Press and
hold button 20 seconds. Make sure to leave off
the charging cradle.
Adjust the Wristband – The wristband should
be snug, but not tight.
1
2
3
4
LED Button
Green: Fully charged Yellow: Not on correctly Red: < 97% charged
On/Off Button
SOS Button – Care
recipients can send SOS to
primary caregiver by
clicking on SOS button and
holding until circle on
watchface is complete
Adjustable Wristband –
To resize, lift up on the
wristband and disengage
the hook, then slide the
band in or out
Magnetic Charging
Station – Face SOS button
up, align pins with watch
back. Charger will audibly
tell you the device is now
charging (unless the
battery is fully dead) and
when you remove watch
from cradle it will say if it is
fully charged or not. Takes
2-3 hours to fully charge.
Copyright 2021 Clairvoyant Networks, Inc.
Quick Start Guide
Smartphone AppTheora Link™
Download the App on Primary’s Phone
Apple iOS®: TheoraCare.com/TheoraLinkApple
Android™: TheoraCare.com/TheoraLinkAndroid
1
Click “Create Account” and Follow Prompts
with Primary’s Information
2
Open Verification Email from Primary’s
Smartphone
3
Don’t forget to check your spam/junk mail folder
Before you begin:
Note: The primary caregiver should be the one to connect
the watch
This must be done on the Primary’s smartphone, not
a desktop
Tap on “confirm email”
Note: If it does not connect you back to app, reopen app
& “sign in” with email and password
Scan the QR code below or visit our website
www.theoracare.com/resources
for helpful step-by-step videos
If you have any questions, about your new Theora Connect,
please contact us at
We’re here to help.
Charge the Wearable – the watch will tell you
when it’s seated correctly on the charger and
charging. LED light will glow red.
Locate the Watch Phone Number – Located
on the back of this guide.
TheoraWearableConnect™
Power on the Wearable Watch – Press and
hold button 20 seconds. Make sure to leave off
the charging cradle.
Adjust the Wristband – The wristband should
be snug, but not tight.
1
2
3
4
LED Button
Green: Fully charged Yellow: Not on correctly Red: < 97% charged
On/Off Button
SOS Button – Care
recipients can send SOS to
primary caregiver by
clicking on SOS button and
holding until circle on
watchface is complete
Adjustable Wristband –
To resize, lift up on the
wristband and disengage
the hook, then slide the
band in or out
Magnetic Charging
Station – Face SOS button
up, align pins with watch
back. Charger will audibly
tell you the device is now
charging (unless the
battery is fully dead) and
when you remove watch
from cradle it will say if it is
fully charged or not. Takes
2-3 hours to fully charge.
Copyright 2021 Clairvoyant Networks, Inc.
Quick Start Guide
Smartphone AppTheora Link™
Download the App on Primary’s Phone
Apple iOS®: TheoraCare.com/TheoraLinkApple
Android™: TheoraCare.com/TheoraLinkAndroid
1
Click “Create Account” and Follow Prompts
with Primary’s Information
2
Open Verification Email from Primary’s
Smartphone
3
Don’t forget to check your spam/junk mail folder
Before you begin:
Note: The primary caregiver should be the one to connect
the watch
This must be done on the Primary’s smartphone, not
a desktop
Tap on “confirm email”
Note: If it does not connect you back to app, reopen app
& “sign in” with email and password
Scan the QR code below or visit our website
www.theoracare.com/resources
for helpful step-by-step videos
If you have any questions, about your new Theora Connect,
please contact us at
We’re here to help.
Theora Connect Watch Phone Number
Using Our Locking Clasp
On our Theora Connect wearable watch, there are two
buttons on either side of the silver clasp that when pressed
allow you to unlock the watch.
On the locking clasp, the buttons on either side of the clasp
are now level and flush with the clasp.
To open the lockable clasp, take the tweezer unlocking key
and gently squeeze in on both sides of clasp at the same
time, where buttons were formerly located, and the clasp
will unlock.
Note: If you ordered the locking clasp after you received
the Theora Connect wearable, it is recommended that you
take the clasp to your local jeweler to attach to the wearable
band. Important terms relating to your purchase and use of Theora Care
products and services may be found at clairvoyantnetworks.com/legal.
Connect to the Watch
4
From the Theora Link app, click on “Ok, it’s on.”
Add photo, first name, last name, then click “Next”
in upper right corner
7
Create Safe Zones
6
From the main app menu, click on “Safe Zones”.
Click the “+” sign in upper right corner.
Type in full address on 1st line. Name safe zone on
second line, scroll down and make sure slider buttons
are all to the right.
You may have as many safe zones as you would like.
In the upper right hand corner click “Save”.
5
Add Contacts to Create a Connected Family
Primary caregiver can add additional trusted contacts to
send/receive calls and get all alerts with care recipient.
Quik Connect™ Auto-Answering Audio
From the map - click on the 3 bars located in the upper
left corner, this will take you to the main app menu.
From the main app menu, click on care recipient’s
name this will take you to the dashboard. Click on ”Quik
Connect” (the red button) to initiate call. The loved one’s
wearable automatically answers.
Enter the phone number of the watch listed on the
back of the Quick Start Guide, click “Next”.
Validation code will display on the watch.
Enter code on application smartphone.
You are now connected!
Theora Connect Locking Clasp
Optional Accessory
Only calls from contacts will be answerable by the
wearable.
Clairvoyant Networks, Inc. IF-W522CV
You can add as many contacts as you would like.
User Settings Password: 1234
Part Number: 304-0003-01 Rev B
Theora Connect Watch Phone Number
Using Our Locking Clasp
On our Theora Connect wearable watch, there are two
buttons on either side of the silver clasp that when pressed
allow you to unlock the watch.
On the locking clasp, the buttons on either side of the clasp
are now level and flush with the clasp.
To open the lockable clasp, take the tweezer unlocking key
and gently squeeze in on both sides of clasp at the same
time, where buttons were formerly located, and the clasp
will unlock.
Note: If you ordered the locking clasp after you received
the Theora Connect wearable, it is recommended that you
take the clasp to your local jeweler to attach to the wearable
band. Important terms relating to your purchase and use of Theora Care
products and services may be found at clairvoyantnetworks.com/legal.
Connect to the Watch
4
From the Theora Link app, click on “Ok, it’s on.”
Add photo, first name, last name, then click “Next”
in upper right corner
7
Create Safe Zones
6
From the main app menu, click on “Safe Zones”.
Click the “+” sign in upper right corner.
Type in full address on 1st line. Name safe zone on
second line, scroll down and make sure slider buttons
are all to the right.
You may have as many safe zones as you would like.
In the upper right hand corner click “Save”.
5
Add Contacts to Create a Connected Family
Primary caregiver can add additional trusted contacts to
send/receive calls and get all alerts with care recipient.
Quik Connect™ Auto-Answering Audio
From the map - click on the 3 bars located in the upper
left corner, this will take you to the main app menu.
From the main app menu, click on care recipient’s
name this will take you to the dashboard. Click on ”Quik
Connect” (the red button) to initiate call. The loved one’s
wearable automatically answers.
Enter the phone number of the watch listed on the
back of the Quick Start Guide, click “Next”.
Validation code will display on the watch.
Enter code on application smartphone.
You are now connected!
Theora Connect Locking Clasp
Optional Accessory
Only calls from contacts will be answerable by the
wearable.
Clairvoyant Networks, Inc. IF-W522CV
You can add as many contacts as you would like.
User Settings Password: 1234
Part Number: 304-0003-01 Rev B
Theora Connect Watch Phone Number
Using Our Locking Clasp
On our Theora Connect wearable watch, there are two
buttons on either side of the silver clasp that when pressed
allow you to unlock the watch.
On the locking clasp, the buttons on either side of the clasp
are now level and flush with the clasp.
To open the lockable clasp, take the tweezer unlocking key
and gently squeeze in on both sides of clasp at the same
time, where buttons were formerly located, and the clasp
will unlock.
Note: If you ordered the locking clasp after you received
the Theora Connect wearable, it is recommended that you
take the clasp to your local jeweler to attach to the wearable
band. Important terms relating to your purchase and use of Theora Care
products and services may be found at clairvoyantnetworks.com/legal.
Connect to the Watch
4
From the Theora Link app, click on “Ok, it’s on.”
Add photo, first name, last name, then click “Next”
in upper right corner
7
Create Safe Zones
6
From the main app menu, click on “Safe Zones”.
Click the “+” sign in upper right corner.
Type in full address on 1st line. Name safe zone on
second line, scroll down and make sure slider buttons
are all to the right.
You may have as many safe zones as you would like.
In the upper right hand corner click “Save”.
5
Add Contacts to Create a Connected Family
Primary caregiver can add additional trusted contacts to
send/receive calls and get all alerts with care recipient.
Quik Connect™ Auto-Answering Audio
From the map - click on the 3 bars located in the upper
left corner, this will take you to the main app menu.
From the main app menu, click on care recipient’s
name this will take you to the dashboard. Click on ”Quik
Connect” (the red button) to initiate call. The loved one’s
wearable automatically answers.
Enter the phone number of the watch listed on the
back of the Quick Start Guide, click “Next”.
Validation code will display on the watch.
Enter code on application smartphone.
You are now connected!
Theora Connect Locking Clasp
Optional Accessory
Only calls from contacts will be answerable by the
wearable.
Clairvoyant Networks, Inc. IF-W522CV
You can add as many contacts as you would like.
User Settings Password: 1234
Part Number: 304-0003-01 Rev B
Theora Connect Watch Phone Number
Using Our Locking Clasp
On our Theora Connect wearable watch, there are two
buttons on either side of the silver clasp that when pressed
allow you to unlock the watch.
On the locking clasp, the buttons on either side of the clasp
are now level and flush with the clasp.
To open the lockable clasp, take the tweezer unlocking key
and gently squeeze in on both sides of clasp at the same
time, where buttons were formerly located, and the clasp
will unlock.
Note: If you ordered the locking clasp after you received
the Theora Connect wearable, it is recommended that you
take the clasp to your local jeweler to attach to the wearable
band. Important terms relating to your purchase and use of Theora Care
products and services may be found at clairvoyantnetworks.com/legal.
Connect to the Watch
4
From the Theora Link app, click on “Ok, it’s on.”
Add photo, first name, last name, then click “Next”
in upper right corner
7
Create Safe Zones
6
From the main app menu, click on “Safe Zones”.
Click the “+” sign in upper right corner.
Type in full address on 1st line. Name safe zone on
second line, scroll down and make sure slider buttons
are all to the right.
You may have as many safe zones as you would like.
In the upper right hand corner click “Save”.
5
Add Contacts to Create a Connected Family
Primary caregiver can add additional trusted contacts to
send/receive calls and get all alerts with care recipient.
Quik Connect™ Auto-Answering Audio
From the map - click on the 3 bars located in the upper
left corner, this will take you to the main app menu.
From the main app menu, click on care recipient’s
name this will take you to the dashboard. Click on ”Quik
Connect” (the red button) to initiate call. The loved one’s
wearable automatically answers.
Enter the phone number of the watch listed on the
back of the Quick Start Guide, click “Next”.
Validation code will display on the watch.
Enter code on application smartphone.
You are now connected!
Theora Connect Locking Clasp
Optional Accessory
Only calls from contacts will be answerable by the
wearable.
Clairvoyant Networks, Inc. IF-W522CV
You can add as many contacts as you would like.
User Settings Password: 1234
Part Number: 304-0003-01 Rev B
Table of contents
