Thermador T18 Series User manual

INSTALLATION
INSTRUCTIONS
INSTRUCTIONS
D'INSTALLATION
INSTRUCCIONES
DE INSTALACION
9000 561 742
718...
T24....
T30....
Thermador:

INSTALLATION INSTRUCTIONS ......
INSTRUCTIONS D’ INSTALLATION ...
INSTRUCCIONES DE INSTALACION

Table of Contents
Safety and warning information .....ccceseeeeeeen
Installation OPtiONS ......... eee eee
INGIVIGUAL UNIT ttc itiriirrrnie
Ne (6 [os ©) es ],6 (> er
Individual appliances WIth Partition wee
At the end of the Kitchen UNITS etree
INStANAtION .... eee eee ener enen ee eeeen ee eneeneene
INSTANATION FOOM oo ccetenetteerreertrteeeeenieeerennniies
INSTA ATION CAVILY oot rttetteresereeteeeeeeseerseaeeneees
FUPNITUPe/IXTUPES Loco ceecce ee cccsesseseeeeeeessuuaeaseenevee eens
Connecting the POWEP ....c ccs
onnecting the Water .......: cesses eneeeeeeeeees
Installation CIMENSIONS 0... eee
SINGIS| INSTANATION Looe cecteeeeeeetteeeeeeeennteeeees
Side-by-Side installation oo. eeeeeteeeeeees
Water CONNECTION oo... cecceeeeeeeeeeeeeeeeeeeeteeeeettenereneaeaes
Appliance CIM@NSIONS .oececccccceeeeeseseseeeeeeeteeeeeees
18" Appliance (Freezer/Freezer with Ice and
Water CISDENSEN) ooo. cceceeiccceerreeeeettteeeteeetttteeeeennnes
18" Appliance (WING UNI) oo cccceeecetecttssasasaeans
24" Appliance (Retrigerator/Freezer/Freezer
with Ice and Water CISOENSEN oo... ceccceceseeetstasaeeeees
24" Appliance (WING UNIT) oo. ececeeeeeestesesseeeeeerenens
30" Appliance (Retrigerator/Freezer/Freezer
with Ice and Water CISOENSEN oo. ceccceceseresstseaseeees
Required accessories and tools .....cccssssssssssseees
SUPPIEC ACCESSOMIES oo... eect ceeeeeeeeseeeeeeettetees
Optional ACCESSOLISS oo. eee ceeeeeeeeeeeeteeetteneeeeetes
Other required accessories from specialist outlets ..
Installation INStrUCTIONS ......ceeeesseeeesneeeenneeeeneeeees 18
1. Checking the installation cavity oo... 18
2. Transport of the appliance oo... 18
3, Removing the packaging wee 19
4. Installation preparation voces 19
5. Changing over the door hinges ......... 19
6. Preparing the installation cavity .......... 22
7, Attaching an alternative anti-tio device 23
8. Preparing to connect the water ........ 24
9. Attaching the edge protection ......... 24
10. Side-by-Side installation vo. 24
14. Pushing the appliance into the
Installation CAVITY cccececeseeerereees 25
[=] 12. Installing and aligning the appliance ... 26
13. Attaching the appliance to the
TOD OF thE CAVILY oo. cccceceeessssteasaeaeees at
14. Attaching the individual appllance
to the side of the Cavity wo... eee at
15. Checking that the finger guard
MOVES CASI oo. ect eeeteeiee 28
16. Connecting the water to the appliance 28
. Attaching the toe kick panel... 29
. Commissioning the Appliance ......... 30
. Preparing the furniture doors we, 30
. Loading the appliance door... 31
21. Attaching the adjusting rail
to the furniture COOP wo. 32
22. Attaching and aligning
the furniture COOP oo. 33
23. Attaching the furniture door ve 34
24, Attaching the lower bracket ve 35
. Attaching the finger guard we. 36
. Attaching the COVErS Jee 36
. Aligning the ice-water dispenser ........ 38
28. Attaching the cover Strips we 39
29. Mounting of air separator oe 40
30. Adjusting the door opening angle ...... 40
31. Changing the door Spring wn 40

Before you Begin
Read these instructions completely and carefully.
4. WARNING
These appliances are top-heavy and must be secured to
prevent the possibility of tipping forward. Anti-tip protection
is required.
Keep coors closed until the appliance is completely installed
and secured per installation instructions.
Due to the weight and size of this appliance, and to reduce
the risk of personal injury or damage to the product -—
TWO PEOPLE ARE REQUIRED FOR PROPER
INSTALLATION.
This appliance must be properly grounded. See the section
on “Connecting the power” on page 8.
Use this appliance only for its intended purpose.
Immediately repair or replace electric service cords that
become frayed or damaged.
Unpiug the appliance or switch off the fuse before cleaning
or making repairs.
Repairs should be made by a qualified service technician.
4. CAUTION
Skill — Level - Installation of this appliance requires basic
mechanical, carpentry anc plumbing skills.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered
under the Appliance Warranty.
See the Owner's Manual for warranty information.
4. IMPORTANT
Save these instructions for iocal inspector's use. Observe all
governing codes and ordinances.
Note to Installer — Be sure to leave these instructions with
the Consumer.
Note to Consumer — Keep these instructions with your
Owner's Manual for future reference.
General
These installation instructions are intended for use by
qualified installers. All connections for water, electrical bower
and grounding must comply with iocai codes and
ordinances and be made by licensed personne! when
required. In the absence of a local code:
— Inthe U.S.A,, in accordance with the National Electric
Code, ANSI/NFPA70O — latest ecition/State and
Municipal codes and/or local codes.
— In Canada, in accordance with the Canadian Electric
Code C22.1 - latest edition/Provincial and Municipal
codes and/or local codes.
WARNING
WARNING - This indicates that death or serious inju-
ries may occur as a result of not observing this
warning.
CAUTION
CAUTION - This indicates that minor or moderate inju-
ries or Gamage may occur as a result of not observing
this warning.
IMPORTANT NOTE/NOTE - This: is used to draw the
user's attention to something in particular.

Installation options
There are many different installation options.
These are limited only by the design of the kitchen and the
function of the finger guard.
Individual unit
Side-by-Side
* Partition required!
When 2 appliances are installed Side-by-Side, the Basic
Combination Side-by-Side Sealing kit must be used to
ensure a stable connection.
see the section on “Optional accessories” on page 17.
Individual appliances with partition
— When dimensioning the partition for model 4, note the
thickness of the furniture fronts to prevent damage if the
doors are opened at the same time.
- Use the Extrerne Combination Side-by-Side Heating kit
if the gap between the appliances is less
than 6" (460 mm).
see the section on “Optional accessories” on page 17.
— Minimum thickness of the partition °/," (46 mm).
At the end of the kitchen units
lf one side of the appliance is visible, a side panel must be
used.
The side panel must be connected firmly to the wail, tne floor
and overhead furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panei are taken from the opposite
cavity wall. During installation ensure that tne cavity is square
and the exact size.

Installation
PAN WARNING
Do not install the appliance:
— outdoors,
— inan environment with dripping water,
— inrooms which are at risk of frost.
Appliance is very heavy — for empty weight see the
following table:
Refrigerator 24" approx. 370 los/140 kg
Refrigerator 30" approx. 350 lbs/158 kg
Freezer 18" approx. 255 llps/1715 kg*
Freezer 24" approx. 300 Ilps/135 kg*
Freezer 30" approx. 335 llps/1 50 kg*
Wine unit 18" approx. 300 |lbs/135 kg
Wine unit 24" approx. 360 |lbs/160 kg
(* without Water Dispenser)
Installation room
The appliance snould be installed in a dry, ventilated room.
The ambient temperature should not drop below 55 °F (13 °C)
or rise above 170 °F (43 °C), otherwise malfunctions may
occur,
The installation location should not be exposed to direct
sunlight and not placed near a heat source, such as an oven,
radiator, etc. If installation next to a heat source is
unavoidable, use a suitable insulating plate or observe the
following minimum distances from the heat source:
— 41/4" (80 mm) from an electric cooker,
= 12" (800 mm) from an oil or solid-fuel cooker.
Installation cavity
It is important to observe the specified dimensions of the
installation cavity for a trouble-free installation of the
appliance and for the subsequent general view of the
furniture front.
In particular ensure that the cavity is square.
Squareness can be checked by suitable means, é.g. spirit
level, dlagonal measurements, etc
The minimum thickness of side walls and the top wall must
be /," (16 mm).
The minimum thickness of toe kick panel must be 1/5" (3mm).
A thickness of °/," (19 mm) is recommended.
Furniture/fixtures
The new appliance is screwed securely to adjacent and
overhead furniture/fixtures.
For this reason it is essential that all attachable furniture/
fixtures are connected securely to the base or the wall by
Suitable means.
Base
PAN WARNING PAN
A fully-load appliance is very heavy — for the load-
bearing capacity at least see the following table:
Refrigerator 24" approx. 890 Ibs/400 kg
Refrigerator 30" approx. 11170 Ibps/500 kg
Freezer 18" approx. 560 llbs/250 kg*
Freezer 24" approx. 780 llbs/350 kg*
Freezer 30" approx. 950 lbs/425 kg*
Wine unit 18" approx. 550 |bps/245 kg
Wine unit 24" approx. 694 Ibs/310 kg
(* without Water Dispenser)
To ensure that the appliance is installed securely and
functions properly, the base must be flat and level.
The base must 06 made of a hard, rigid material.
The installation area must be the same height as the rest of
the room.
On account of the heavy weight of a fully loaded appliance,
a load-bearing base is required. If in doubt, contact an
architect or a building expert.

Connecting the power
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
— Do not remove ground prong.
— Do not use an adapter.
— Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
The appliance comes with a 3-wire power supply cord,
UL listed in the USA.
The appliance requires a 3-wire receptacle.
The receptacie must be installed by a licensed electrician
only.
The socket must be fused with a 10 to 16 A fuse.
Please observe in this coherence the following table:
Appliance MAX load at one time
Refrigerator 24" 2,0 Ampere
Refrigerator 30" 2,0 Ampere
Freezer 18" (incl. lceMaker) 3.5 Ampere
Freezer 24" (incl. lceMaker) 4.0 Ampere
Freezer 30" (incl. lceMaker) 4.5 Ampere
Wine unit 18" 2.0 Ampere
Wine unit 24" 2.0 Ampere
Orient ground prong to the bottom as shown in the pictures.
For the installation position of the receptacle see “Installation
dimensions”, page 9.
Additional grounding procedure
Some local regulations may require a seperate ground.
In such cases, the required accesseory ground wire,
clamp and screw must be purchased seperately.
Never ground the appliance to plastic plumbing lines,
gas lines or water pipes.
Grounding instruction
This appliance must be grounded. In the event of
a malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for
the electric current
WARNING
Improper connection of the equipment grounding con-
ductor may result in electric shock. Have the appliance
checked by a qualified electrician or service technician
if you are in doubt as to whether the appliance has
been properly grounded.
Connecting the water
CAUTION
Only connect the appliance to drinking water!
A cold water connection is required for operation of the
automatic ice maker. Tne water pressure must be between
25 and 120 p.s.i. (1.72-8.25 bar). The installation must
comply with local plumbing regulations.
A separate shut-off valve must be installed for the appliance
water connection.
The shut-off valve for the water connection must not be
behind the appliance. It is recommended to place the shut-
off valve directly next to the appliance (base unit) or in
another easily accessible location.
When installing the water connection, observe the permitted
installation areas for the pipe. For the permitted instalation
areas and dimensions see “Installation cimensions”, page 9.
The supply pipe can be located at the side on the right (a),
at the side on the left (0) or underneath (c).
Maximum outer diameter of the water pipe
(without fittings): 19/30" (40 mm).
Attach a separate shut-off valve for the water connection
ina Suitable, easily accessible location.
Do not use a self-piercing valve!

Installation dimensions
Single installation
By 6
(205)
83%, i
(2130) (2183.6)
IMPORTANT!
itis strongly recommended the top.panel boundary of the
niche be of solid material /," thickness). Make sure that
the upper. boundary is completely flush: fora depth: of at
least 4".
IMPORTANT!
Make sure thatthe side walls of the niche are completely
flush! if, for. some reasons, a:seperate niche cabinet is
created, make sure that: the furniture return-area is atleast
4" deep.
Appliance x Y
Cc H H
one
48"
(17°/4'/450.8
mm)
18"
(457
mm)
9g"
(229
mm)
(59)
+ 24" (23°/4"/608.2 mm) 24" (610 mm) 72" (305 mm)
1334'| | X >| 30" (29°/4"/755.6 mm) 30" (762 mm) | 15" (681 mm)
(350) | @max.1932"
(10)
Legend:
A Area for installation of the water connection. B Area for installation of the power connection.
It is recommended the water-box be placed adjacent to G Opening depth of niche, depending on kitchen design.
the installation cavity, so that it can be accessed for C = 24" (610 mm) minimum
service without uninstalling the appliance. If this is not
possible, place the recessed water box adjacent to the NOTE:
power supply socket elevated at the heights as Cavity must be square. Side wall of the cavity must be flush.
referenced in areas A+B.

Side-by-Side installation
The cavity dimensions indicated above for the respective
appliance apply to a Side-by-Side installation of two
appliances.
The total width of the cavity results from the addition of the
cavity wicths indicated for the two appliances.
Example:
Freezer 18"/Refrigerator 30"
48"
18" (1219)
30"
(457) 15" (762)
90°
g4" 8378"
(2133,6) (2130)
Cc
* |e %
7] 1 8" 30"
(457) 48" (762)
(1219)
IMPORTANT!
itis strongly recommended the top panel boundary. ofthe niche
be of solic material P/," thickness).:Make sure.that the upper
bouncaryis completely flush fora depth-of atleast 4".
IMPORTANT!
Make sure that the sidewalls of the niche are completely flusn!
if, for-some reasons, a seperate niche cabinets created,
make.sure thatthe furniture return-area is atleast 4" deep.
30"
(457) 4g" (762)
(1219)
Legend:
A Area for installation of the water connection.
10
It is recommended the water-box be placed adjacent to
the installation cavity, so that it can be accessed for
service without uninstalling the appliance. If this is not
possible, place the recessed water box adjacent to the
power supply socket elevated at the heights as
referenced in areas A+B.
B Area for installation of the power connection.
G Opening depth of niche, depending on kitchen design.
C = 24" (670 mm) minimum
NOTE:
Cavity must be square. Side wall of the cavity must be flush.

Water connection
The supply pipe can be located
a) atthe side on the right,
b) at the side on the left or
c) underneath.
a)
31/39"
(25)
2 Se
(59)
Bmax.'3/e0"
Legend:
A Area for installation of the water connection
B Area for installation of the power connection
11

Appliance dimensions
18" Appliance (Freezer/Freezer with Ice and Water dispenser)
<__17%' e) ,
—__17%4
€)
2315,¢
©)
11g"
b)
(450,8)
-
(450,8)
(608)
“B)
b)f) aje)
797/g" B37 Ih5
(2029) (2125)
1 H
é Bi) a)
¥
216 - 4%
(71,7 — 106,7)
(19) 172542"
(451,2)
f)
ae
(19)
Legend:
a) Acjustment in levelling legs +1 3/9" (85 mim\/—"/5" (3mm). e) Unit dimensions.
b}) Dimensions may vary. f} Wooden coor panel dimension.
c) Thickness of door panel may vary. Note:
qd) This dimension may vary depending on installation, One design of the wooden panel displayed.
panel thickness and kitchen hardware.
12

18" Appliance (Wine unit)
1 u
é 8/) a)
¥
1794
€)
23'%¢
€)
‘ig
b)
(450,8)
(608)
By
a»
7,
11546"
f)
3%
(65-8
14346"
14346"
|
b)
f)
a)e)
f)
7971q"
83?th3
6374!
|)
(2029)
(2128)
f)
(1623)
797%
(2029)
11546"
(287,4)
J
A
10'4'
152")
(257)
f)
(29)
>
¥.
a
4"
aot
6)
b)
(101.6)
4
t
13/32"
(10,1)
(19) 172562"
(451,2)
f
c) |
Ya
(19)
21% 6-46
(71,7 - 106,7)
Legend:
a) Acjustment in levelling legs +1 of" (85 mim)/—"/5" (3mm).
SS
) Dimensions may vary.
oO
| Thickness of coor panel may vary.
jon
\ This dimension may vary depending on installation,
panel thickness and kitchen hardware.
€) Unit dimensions.
f} Wooden coor panel dimension.
Note:
One design of the wooden panei displayed.
13

24" Appliance (Refrigerator/Freezer/Freezer with lce and Water dispenser)
2334 e) | LC 2334 e) 2315. e a)
(603,2) (603,2) | BOB) ) + )
b) f) a)e)
797/18" 83? ho
(2029) (2125)
7% u
n (18%) @)
b) (101.6) ¥
21%6' -4%6
(71,7 — 106.7)
232582"
(603,6)
f)
Legend:
a) Acjustment in levelling legs +1 3/,." (85 mm)/—"/5" (3mm). e) Unit dimensions.
b}) Dimensions may vary. f} Wooden coor panel dimension.
c) Thickness of door panel may vary. Note:
qd) This dimension may vary depending on installation, One design of the wooden panel displayed.
panel thickness and kitchen hardware.
14

24" Appliance (Wine unit)
2334°e)
231546)
(608)
1/g" b)
(3)_¥.
j
11546"
(287,4)
f) f
3% 6. :
Gene + 14346"
(360)
v
14346"
f) (360)
6374'
f) (623) y
79%
14346
(2029) (360)
{
11546"
(287,4)
’*
104°
(257) f)
~4
(101,8)
*
b) f) aje)
797Ig" 83?%%o
(2029) (2125)
4 i
é af a)
Y
216 - 46
(71,7 — 106,7)
Legend:
a) Adjustment in levelling legs +1°/," (85 mm)/-!/," (43 mmm).
SS
) Dimensions may vary.
Qo
oO
\ Thickness of coor panel may vary.
\ This dimension may vary depending on installation,
panel thickness and kitchen hardware.
8)
f)
Unit dimensions.
Wooden door pane! dimension.
Note:
One design of the wooden panei displayed.
15

30" Appliance (Refrigerator/Freezer/Freezer with lce and Water dispenser)
29%")
(755.6)
2316
{608
e) b)
tig"
“EN
11546"
(287,4)
e)
2315
(60
32 21/32"
(82
Li A
b) f) ae)
| 7978" 83? ho
|, (2029) (2125)
7 1 B
(ii) a)
¥
b) a4 8)
4
216 -4%6
(71,7 ~106,7)
Legend:
a) Adjustment in levelling legs +1°/," (65 mm\/—"/5" (48 mm).
SS
) Dimensions may vary.
\ Thickness of coor panel may vary.
oO
qd) This dimension may vary depending on installation,
panel thickness and kitchen hardware.
16
6) Unit dimensions.
f} Wooden coor panel dimension.
Note:
One design of the wooden panei displayed.

Required accessories and tools
Supplied accessories
— Installation instructions
-— Operating instructions
— Installation kit
Optional accessories
Basic Combination Side-by-Side Sealing kit
For permanent connection of two individual appliances,
6.9. Freezer next to Refrigerator.
Extreme Combination Side-by-Side Heating kit
lf the gap between the appliances is less than 6" (160 mm).
Panel unification part (Metal strip)
For connection of two furniture doors. Can be used for
standard height furniture doors without further preliminary
work.
Other required accessories from
specialist outlets
Ice maker installation kit 174" OD copper line
For connecting appliances which require water,
6.9. for an ice maker.
Maximum outer diameter of the water pipe
(without fittings): 13/32" (10 mm).
Tools
- Cordless screwdriver T20
— Torx screwdriver T20
- Torx bit T20 + magnetic holder
— /46" (8 mm) hex nut driver
— Wood drills in different sizes
— Open end wrench 1/5" (SW 13 mm)
— Multigrip pliers
— Adjustable wrench
— Cutter with adjustable blade
— Metal tape measure
-— Square
-— Spirit level length 2’ (60 cm) and 4° (1,2 m)
— Marking-out level, length at least 4' (1.2 m) for individual
appliances or 7’ (2.0 m) for Side-by-Side installation
Other
— Stepladder
— Dolly, hand truck
— Hammer drill for drilling holes in wall or floor
— Bits according suitable for material and in different sizes
Wooden beam (cross section min. 3" x 4") as an
alternative tilt protection, length according to the width
of the installation cavity
Wooden screws in different sizes
Thin (max. Ta" (7.5 mm)), Suitable material to protect
the floor from damage (e.g. lino)
Suitable material for covering and protecting furniture
(e.g. protective sheets)
Adhesive tape
Before using, check whether the removed adhesive
tape leaves achesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
17

Installation instructions
The following installation instructions describe the installation
steps for various appliance types:
— Refrigerator units
— Freezer units
— Freezer units with ice maker
— Freezer units with ice-water dispenser
— Wine storage units
Therefore the diagrams may not be a true representation
of your appliance.
Particular reference is made to special installation steps
for individual appliance types.
1. Checking the installation cavity
CAUTION
To ensure a safe, trouble-free installation and an
optimum overall view of the subsequent furniture front,
thoroughly check that the installation cavity complies
with the installation requirements.
Before starting the installation, cneck that the installation cavity
complies with all requirements for a safe and trouble-free
installation.
m Check the base.
Follow the instructions in the section on “Installation
location” on page 7.
m= Check the dimensions of the cavity.
m Check that the cavity is square.
m= = Check location of the socket.
Also follow tne instructions in the section on
“Connecting the power” on page 8 and in the section on
“Installation dimensions” on page 9.
m= = Check location of the water connection
(only for appliances with ice maker).
Also follow the instructions in the the section on
“Connecting the water” on page 8.
m Check attachment of the adjacent furniture/fixtures.
All furniture parts in tne vicinity of the appliance must be
connected securely to the wall.
m Check that adjacent furniture/ixtures do not collide
(door opening angle).
18
2. Transport of the appliance
WARNING
The appliance is very heavy.
Be careful, otherwise people who are helping may be
injured or the appliance may be damaged.
m= = Transport the appliance to a suitable installation location
with suitable means of transportation (trolley, lifting truck
or hand-driven truck).
m Secure the appliance during transportation to prevent it
from overturning.
The appliance is 8371/55" (2125 mm) tall. lf the appliance
cannot be transported in an upright position due to the
structural conditions, the appliance can be transported
horizontally.
CAUTION
Do not erect tne appliance via the side panels.
Risk of damage to the appliance!
When erecting the appliance, observe the required minimum
height at the installation location according to the following
table:
Erection via
appliance side panel
Erection via
appliance rear
Do not erect the
Minimum height appliance via the side
86'/2185 mm
panels!
CAUTION
Always place the means of transport centrally on the
rear side of the appliance. Never push it in from the
front or from the side under the appliance.
Risk of damage to the appliance!

— Carefully open the appliance — risk of tipping over -
and remove accessories and installation materials
from inside the appliance. Close the door again.
PAN CAUTION PAN
Do not remove transportation safety devices which
protect the shelves and storage compartments
inside the appliance until the installation is complete,
otherwise the parts may be damaged.
m Check appliance for damage in transit.
Do not install the appliance if it is visibly damaged.
lf in doubt, contact your dealer.
m Move the appliance with a nand truck securely. 4. Installation preparation
Unpack installation materials and accessories.
j i To improve allocation to the work steps, the packages are
3. Removing the packaging identified differently.
To do this, comply with the overview sheet attached to the
WARNING appliance!
— The appliance may tip over while it is being
unpacked.
— The appliance is very heavy.
— When opening the appliance door, tne appliance
may tip forwards.
Be careful, otherwise people who are helping may be
injured or the appliance may be damaged.
To protect the base from damage during installation:
m= Attach aresidual piece of carpet, lino, etc. to the floor
with adhesive tape in front of the intended installation
location.
m Remove transportation packaging: . .
— Remove the cartoon. Use the cutter securely to 5. Changing over the door hinges
protect the surface of appliance.
WARNING
Before working on the hinge, release the spring.
— Attach the power cord to the back of the appliance Risk of injury!
with a piece of adhesive tape.
— Remove packaging material.
— Remove transportation protection devices and lift
appliance off the pallet - appliance is very heavy!
— Remove accessories from the outside — I|fitis not necessary to change over the door hinges,
of the appliance. continue with the next installation step.
; ; — The door hinges cannot be exchanged in the case of
— Keep adhesive tape which was usec to attach freezers with ice and water dispensers.
the supplied accessories to the appliance.
It is used subsequently for attaching the edge
protection to the cavity wails (see Section 9).
19

Release the spring
m Release the spring on the hinge. Loosen the screw from
lito 0.
Exchanging the door hinges
m Unscrew the coor.
20
Remove the hinges.
Remove the ventilation grille.
Mount new the ventilation grill.