Timex T2351 User manual

P1
Model T2351
FM Dual Alarm Clock Radio
with USB Charging
For additional information, online registration,
and exclusive special offers visit our website:
Questions? Contact Customer Service at 1-800-888-4491
T2351 IB US (English) version
Size: 178 x 178 mm (16 pages)
Color: printing black on white paper
Material: 90gsm wool free book paper
Mar. 15, 2017

1
Table of Contents
What’s in the Box
What’s in the Box................................................................................................................................................................1
Product Care ......................................................................................................................................................................1
Controls Overview..............................................................................................................................................................2
Display................................................................................................................................................................................3
Installing and Replacing Backup Batteries .........................................................................................................................3
Set Up ................................................................................................................................................................................4
Setting the Time ..............................................................................................................................................................4-5
Setting and Using Alarms ................................................................................................................................................6-8
Setting and Using the Radio..........................................................................................................................................8-10
Using in Aux-in Audio ..................................................................................................................................................10-11
Sleep Mode/Dimmer......................................................................................................................................................... 11
USB Charging ..................................................................................................................................................................12
Battery Information ...........................................................................................................................................................12
Safety Information ............................................................................................................................................................13
Troubleshooting................................................................................................................................................................14
Warranty Information ........................................................................................................................................................15
P2
Product Care
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective
material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as
Benzene, thinner or similar materials can damage the surface of the unit.
This product ships with the following items. Make sure all are present.
1. T2351 Alarm Clock 2. Instruction book 3. AC adaptor

2
Controls Overview
Rear Panel
Front Panel
Top Panel
P3
Mode Button
Alarm 1
Button
Snooze/Sleep
Display Dimmer
Button
Alarm 2
Button
Decrease Volume
Button
Increase Volume
Button
Minutes/Minus
Button
Power/Alarm Reset
Button
Hours/Plus
Button
Clock/Presets
Button
FM Antenna
Display
USB Charging Port
DC JackAux-in Jack
CLOCK / PRESETS
HOURS
MINS
MODE
ALM RESET
SNOOZE/SLEEP/DIMMER
USB
CHARGING
PM
BUZZ
RADIO
LOW
BAT T
BUZZ
RADIO
DC 5V/1.5AAUX IN

3
P4
Display
Installing and Replacing Backup Batteries
When lit,
indicates
Buzzer or Radio
is Alarm 2
alarm source.
If neither is lit,
Alarm 2 is not
armed
When lit,
indicates
Buzzer or Radio
is Alarm 1
alarm source.
If neither is lit,
Alarm 1 is not
armed
When lit, indicates backup
batteries should be replaced
When lit,
indicates time
displayed is PM Time display
Your new Timex Clock Radio includes a battery backup system that will maintain the
time and alarm settings during a temporary power interruption.
1. Keep unit connected to AC power when changing batteries to avoid losing your
settings.
2. Press on the battery door locking tab to open and remove the battery door.
3. Check the correct polarity (+/ - ) markings in the battery compartment and install two
“AAA”batteries (not included).
4. Replace the battery door.
NOTE: With batteries installed, the display will turn off during a power failure but the
clock will continue to run and maintain your alarm settings. The alarm will not sound
when operating on batteries.
21 3
Press
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
Model: T2351
Dual Alarm Clock Radio
Model: T2351
Dual Alarm Clock Radio
OPEN

P5
Set Up
Connecting to Power Source
Connect the AC adapter to the DC jack on the back of the unit and plug into a
working wall outlet that is not controlled by a wall switch. The unit does not operate
on batteries (the battery back up system maintains clock settings during power failures).
Turning the Unit ON or OFF
Make sure unit is OFF. To confirm unit is off, press the Power/Alarm Reset Button
once or twice until OFF appears on the display.
4
Setting the Time
1
• Press and release the Power/Alarm Reset
Button on the unit at any time to turn the
unit ON or OFF.
ALM RESET
ALM RESET
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO

5
P6
2 SECS
5
Press and release the Clock/Presets Button to complete time setting.
Press and hold the Clock/Presets Button until the time flashes on the display.
3
2
Press and release the Hours/Plus Button to adjust the HOUR.
NOTE: The PM indicator will light when the hour is set for PM. There is no
AM indicator.
Press and release the Minutes/Minus Button to adjust the MINUTES.
PM indicator
4
CLOCK / PRESETS
CLOCK / PRESETS
HOURS
MINS
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO

P7
6
Setting and Using Alarms
1
Press and hold the Alarm 1 Button until current alarm time flashes on the display.
This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and
operates in the same way. Instructions below show Alarm 1. Follow the same
method to set Alarm 2.
2
Press and release the Hours/Plus Button to adjust the HOUR.
NOTE: The PM indicator will light when the hour is set for PM. There is no
AM indicator.
Press and release the Minutes/Minus Button to adjust the MINUTES.
3
2 SECS
PM indicator
HOURS
MINS
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO

P8
7
4
OR OR
Press and release the Alarm 1 Button to complete alarm time setting.
Disarm alarm
Set alarm to Buzzer
Set alarm to Radio
Press and release the Alarm 1 Button repeatedly as needed to cycle
to desired alarm mode: Buzzer (default), Radio (last FM station
played) or Off (alarm is no longer active). Note that the last radio
volume listened to will be the radio alarm volume.
To silence any sounding alarm and reset it come on the next day at the
same time, press and release either the Power/Alarm Reset Button,
Alarm 1 Button or Alarm 2 Button.
SELECTING YOUR ALARM SOURCE/DISARMING THE ALARM
RESETTING AN ALARM TO COME ON THE NEXT DAY
Alarm set to Buzzer
Alarm set to Radio
Alarm OFF
(no indicator)
ALM RESET
PM
BUZZER
RADIO
LOW BATT
BUZZER
RADIO
BUZZER
RADIO
BUZZER
RADIO
BUZZER
RADIO

8
P9
OR
Press and release the Snooze/Sleep/
Dimmer Button when the alarm sounds to
silence it for 9 minutes. Snooze can be
used several times during alarm.
Press and release the Volume Buttons to adjust radio volume.
TIP: Extend FM antenna for best reception.
2
OR
3
Press and release the Hours/Plus Button or Minutes/Minus Button to
tune radio to a desired station. Press and hold to seek the next clear station.
Setting and Using the Radio
BASIC RADIO OPERATION
SNOOZE
1
SNOOZE/SLEEP/DIMMER
ALM RESET
HOURS
MINS
Press and release the Power/Alarm Reset Button to turn unit On. Then
press and release the Mode Button as needed to select FM radio band.
MODE

9
P10
This unit will store up to 10 FM station presets.
SETTING RADIO PRESETS
PRESET RADIO SETTING AND OPERATION
2 SECS
3
4
Press and hold the Clock/Presets Button to enter presetting mode.
OR
Press and release the Hours/Plus Button or Minutes/Minus Button to
select the preset number you wish to assign (P01 - P10).
OR
2
1
Press and release the Hours/Plus Button or Minutes/Minus Button to
tune radio to a station you want to assign to a preset. Press and hold to seek
the next clear station.
CLOCK / PRESETS
HOURS
HOURS
MINS
MINS
ALM RESET
Press and release the Power/Alarm Reset Button to turn unit On. Then
press and release the Mode Button as needed to select FM radio band.
MODE

10
P11
AUX IN
PRESET RADIO OPERATION
2
1
Connect a standard audio cable with 3.5mm plug (not included) to the AUX
IN jack located on the back of the unit and to the output/headphone jack of
your audio device.
Using Aux In Audio
5Press and release the Clock/Presets Button
to confirm the preset number (P01 - P10) you
want to assign to the current station.
Continue steps 1- 5 to set all desired presets.
To listen to a preset FM station at any time, press and release the
Clock/Presets Button as needed to select the desired preset station.
Mobile Phone Game Devices iPod Laptop
PC/Tablet MP3/MP4
ALM RESET
Press and release the Power/Alarm Reset Button to turn unit On. Then
press and release the Mode Button as needed to select AUX mode.
MODE
CLOCK / PRESETS

11
P12
OR
Sleep mode allows you to set the unit to turn off after a selected time
interval. It allows you to fall asleep while listening to the radio or a device
that is connected to the Aux In Jack.
NOTE: It will power off the Timex unit, but it will not power off your AUX
device.
Press and release the Snooze/Sleep Button in FM or AUX mode to select
the desired sleep interval: 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes or OFF
(turns unit off right away).
Sleep Mode
3
Control audio playback on your device, making sure output volume is turned
up. If needed, press the Volume Buttons to adjust volume on the unit.
Press and hold the Snooze/Sleep Button to toggle display brightness between
high and low settings. Dimmer cannot be adjusted when alarm is sounding.
Dimmer
SNOOZE/SLEEP/DIMMER
SNOOZE/SLEEP/DIMMER

12
P13
Connect a USB cable (not included) to the USB Charging Port on front of the unit
and connect the other end to the device you wish to charge. Monitor charging on
your device.
USB Charging
Battery Cautions and Tips
• Only use the recommended/supplied batteries or equivalent.
• Use alkaline batteries for longer life.
•
Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium
batteries.
• Insert batteries with proper polarity (+/–) as indicated.
• Remove exhausted batteries from product.
• Recharge rechargeable batteries under adult supervision.
• Do not attempt to recharge non-rechargeable batteries.
• Do not open batteries or heat them beyond normal ambient temperatures.
• To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or
longer.
• Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage
comes in contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least
30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if
any symptoms occur.
• Store in cool, dry, ventilated area away from hazardous or combustible material.
• Do not dispose of batteries in the household trash or fire.
• Follow applicable laws and local regulations for the disposal and transportation of batteries.
USB
CHARGING
PM
BUZZ
RADIO
LOW
BAT T
BUZZ
RADIO

13
P14
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take
special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed,
sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede
the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is
always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left
unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Antenna – Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to
prevent damage or corrosion.
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the
operating instructions should be referred to qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL SOUS LA
PLUIE ET L’HUMIDITÉ
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock to persons.
The symbols above are located at the bottom of the cabinet.
CAUTION: To prevent electric shock, do not use this (Polarized) plug with an extension cord receptacle, or other outlets unless the
blades can be fully inserted to prevent blade exposure.
ATTENTION: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur. Une prise de courant, ou
une autre sortie de courant sauf si les lames peuvent étre insérées à fond sans en laisser aucune partie à decouvert.

14
FCC Information
Troubleshooting
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
P15
1. The unit does not power ON.
The unit is not connected to AC outlet, the AC outlet has no power, or is controlled by a wall switch that
is “OFF”. Check AC outlet and wall switch.
2. Alarm does not come on.
The alarm time AM or PM incorrectly set, Alarm was OFF, etc. Check alarm settings.
3. Low battery indicator is on.
Batteries have not been installed correctly in the battery compartment or the batteries may be weak or
exhausted. Try replacing batteries.
4. Poor FM Radio reception on certain stations.
Weak or distant station. Try adjusting the direction of the FM wire antenna.
5. Unit shuts “Off” unexpectedly.
The unit is in Sleep Mode instead of the power ON mode, the unit was turned ON by an alarm and the
alarm time ended, or the AC outlet unit is connected to is controlled by a wall switch that is turned
OFF. Check mode on unit. Check wall switch. Turn unit on with Power Button.