Timpani FLAMY200X User manual
USER MANUAL
www.timpani.it
FLAMY200X
MACCHINA FUOCO SINGOLA FIAMMA 200W DMX
www.timpani.it
Flame Projector Instruction
Thank you for having chosen our ame machine . If you follow the instructions given in this manual,
we are sure that you will enjoy his device for a long period of time.
Unpack your ame machine and check everything whether complete per machine match one power
cable , one use manual instruction.
Technical parameters:
Voltage : AC110V/220V 50/60Hz
Fire height : 1-4 meters
Coverage : 1m³
Power : 200W
Control : DMX-512 control / power switch direct
SAFETY INSTRUCTIONS CAUTION
● This machine real ame up to a vertical height of 1-4 meters!
● Handing by skilled personal only!
● Vertical height of room must be at least 8 meters!
●In the range of the ame projector inammable , incendiary and explosive materials as well as open
re and smoking are prohibited!
● It is vital , that there has to be a safety margin to inammable objects and living begins in a radius
of 2.5 meters!
● Operating during wind and draught is strictly prohibited!
● Use instrument only vertical standing●
● Flame machine is only allowed for events and shows!
www.timpani.it
INSTRUCTION
1. Please follow to do before machine working:
● Open door of ame machine , and then put the ame oil to machine inside. Please make sure the
oil can is correct xed . After nished , close the door of ame machine.
● You can choose put 1 pcs oil can or 2 pcs oil cans to one ame projector inside .
● That has two control type: power switch direct control and DMX control.
● If control by power switch direct, please press switch to “POWER”, and then connect power supply
for ame machine, you can control machine output ame by hand . Please control the output time ,
can not pass 3 seconds.
● If control by DMX signal , please contact power supply for ame machine , and then press the“DMX”
switch.
Setting the DMX address , push DMX “1” to ON state , its nished setting. And then use DMX
signal line connect machine and DMX controller . The machine will be DMX self-inspection, and the
detection lamp will ickering 3 to 4 times. When contact the DMX cable , usually the detection lamp
will incessant ickering. Otherwise, the detection lamp will not to icker.
If have more ame machine , you can connect ame machine one by one. Please contact power
supply for DMX controller. And then you can use DMX controller to control ame machine working.
2. Please follow to do when machine start working:
● The ame machine have two channels under the control by DMX512.
First of all , you need to choose the re will come out on reball or pillar. And push the rst switch
of DMX controller, the re will come out on reball , if you push two switches to together , the re will
come out on pillar, because the second push is control output time.
●This item have function for cut the power supply if ame machine output till 3 seconds.
If you want to change color intelligence, please achieve by self-programmed of DMX controller.
3. Please follow to do after machine nished working:
● After the work nish , please turn off all the power rst , and take oil an out off machine . And then
use dry cloth to clearing machine, as igniter, nozzle, and oil connector and so on. Please package
ame machine well.
Table of contents
