tiptap Counter Display User manual

Counter Display
Assembly Instructions
For inquiries, contact us at [e-mail]
Keep the packaging box
for the return shipment.

1 2 3
45
Parts List
Installation Steps
Optional
Place printed signage on the
front side of the base and line
up at the cut out hole.
Place device in the front gasket
and put it through the front of
the signage and base. Make
sure the device denomination is
right side up.
Connect the back gasket with
the front gasket until snug.
Multiple Devices: Repeat steps
2 and 3 until all devices are in
place.
Attach the charging cable to
the device (USB-C) and to the
wall plug (USB-A).
Plug into power source and make
sure excess cable is zip tied and
tucked away.
Optional Battery: Attach
device (USB-C) to charged
battery pack (USB-A).
Optional Battery: Skip this step.
×1
$
$
Front Gasket Device Back Gasket Signage Device Base
×1-3 ×1-3 ×1-3 ×1-3
×1 ×1 ×1
High Capacity Battery
Charging Cable
Wall Plug
Complete a full charge
cycle before use.
Battery life is approximately 49 hours.
Once the program has ended, pack the original contents in the box it arrived in and affix the
return shipping label provided to the outside of the box. If you have misplaced the shipping
label please email [e-mail] and we will happily email you a replacement.
Return Shipping