Tivax STB-T12 User manual

USER MANUAL
STB-T12

1
Tivax Digital TV Converter Important Safety Instructions
The Tivax Guarantee
Tivax is dedicated to bring the world of digital television to you, no matter if your TV
set is an older model. For questions or technical issues, please visit: www.tivax.com
WARNING
-
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PRESENT BLADE EXPOSURE.
-
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE
-
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY
INSERT.
CAUTION
Risk of Electric Shock
Do not open
Caution: To reduce the risk
of electric shock, do not
remove cover (or back).
No user- serviceable parts
inside. Refer to qualified
service personnel.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product's enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Dolby Digital
Certification
Manufactured under
license from Dolby
Laboratories. “Dolby”,
and the double-D symbol
are trademarks of the
Dolby Laboratories.
Caution: Do not alter or change the construction of this device without written authorization
from Tivax, Inc. Furthermore, any unauthorized alteration of this device without written
approval by Tivax, inc. will void any warranty and the owner's right to operate this device.
Note: This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This device generates, uses and also radiate radio frequency energy and, if not installed
in a proper manner and used in accordance with the instructions provided in this manual,
may cause harmful interference with other equipment.
In addition, Tivax does not warrant that interference will not occur when properly installed.
If the device does cause interference with other equipment please defer to this manual for
suggestions. Options include moving the device or re-orienting it away from equipment

2
Important Safety Information
Always use care when using your Tivax. To reduce the risk of electrical shock, fire,
or other possible injuries, always keep safety in mind when operating your Tivax

Read all safety instructions and warnings before operating your Tivax receiver

Keep this manual for future reference

Do not use your Tivax near water or anyplace where it may make contact with
water, such as swimming pools, sinks, etc.

When cleaning your Tivax, always unplug for safety. Do not use liquid cleaners
as they may affect the electronics. Instead, use a dry cloth.

Your Tivax generates a small amount of heat, so do not block the vents or inhibit
normal air circulation. To protect your Tivax from overheating, place it on a flat
smooth surface, such as a shelf. Avoid placing it on rugs or other surfaces where
air circulation may be blocked.

Your Tivax comes with a standard polarized plug (one blade is wider than the other,
with a third plug for grounding). Use outlets designed for this type of plug for your
safety. If your outlet is not compatible with this plug please consult an
electrician.

Do not pinch, cut or crimp the electrical cord.

Use only UL Certified antennas with your Tivax

Unplug your Tivax during storms or when not used for long periods of time to
protect from lightning or power surges

Operate your antenna according to the safety standards recommended by the
antenna manufacturer. When installing a rooftop or outdoor antenna, be sure
to ground it to protect your Tivax and other indoor electronic equipment from
power surges and lightning.
WARNING: The mains plug is used as disconnect device, the disconnect device
shall remain readily operable.
WARNING: The battery (battery or batteries or battery pack) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Double Insulation. This is CLASS II apparatus.

3
Welcome to the world of Digital TV
Welcome to the world of Digital TV
All set top boxes (STB) have been tested in the factory for proper operation. In case you
experience any problems, please follow these simple steps to troubleshoot your problems.
Please make sure your TV and STB are plugged in and powered up, and that the STB is properly
connected to your TV by either a RF cable or a A/V cable set (red white yellow connectors on
each end) following the guideline below. Don't forget to properly insert batteries into the remote
control unit.
Connection option RF:
The STB can be operated in RF mode to connect to your TV. In this case the RF-OUT connector
of the STB connects to your Antenna Input on your TV. Your TV must be tuned to either channel
3 or 4 and the STB needs to be set to the corresponding channel selected on theback of the STB
by utilizing the small slide switch.
Connection option A/V:
If you TV is equipped with an A/V input, sometimes referred to as AV1 or AVin, Then you may want
to choose the A/V connection for a better quality picture. ARF connection as described above has
some inherent limitation and a somewhat lower quality than A/V.
Please make your connection before turning on your devices and plug in the yellow terminated
cable to the AV-in on your TV and the AV-out on the STB. Similarly, connect the red and white
terminated cable to the corresponding Audio-in on your TV and Audio-out on the STB.
Once a connection utilizing option RF or option A/V is made turn on your TV first and then your STB.
The STB is turned on by pressing the power button on the front, or using the remote, power up the
STB. You should see a logo come up on your TV as the STB turns on.
Since channel programming is different in various regions, you must set up your set top box with
your channels by using the auto scan feature.
Make sure a suitable antenna is connected to the antenna input, labeled as RF-In on the STB,
and after turning on your TV and STB, press the Menu button on your remote. Use the cursor
keys around the OK button to move the highlighted field to Channel-Scan and press OK. You
may need to reorient your antenna to achieve best results. If you have an external antenna, it
may have already been oriented such that it point to the transmitter stations.
To help in orienting your antenna, a signal strength indicator can be turned on in the STB. Use
the menu button and select signal strength or signal quality item to display a signal quality bar
on the screen.
Although digital TV will give a very clear picture when a signal is received in sufficient strength, a
weak signal will result in dropouts or no picture at all. Analog stations would just be received with
noise in the sound and snow in the picture, Digital transmissions will dropout or have large blocks
of images missing if the RF signal is of insufficient strength or quality. Reorienting your antenna or
getting a better quality antenna may solve this problem. Some experimenting may be required to
obtain the best results.
Thank you for choosing a Tivax Set Top Box and enjoy the new world of Digital Television.

4
Bienvenido al mundo de Digital TV
Todas las cajas encima del televisor (STB) se han probado en la f áb rica para la operación
apropiada. En caso de que usted encuentre cualquier problema, por favor siga estos pasos
simples para localizar las aver í as de sus problemas.
Por favor asegurece que su TV y STB estén conectado y encendido, y que el STB es conectado
correctamente con su TV por un cable RF o cable A/V (conectadores rojos amarillos blancos en
cada extremo) que sigue la pauta de abajo. No se olvide de insertar correctamente las
bater
í as en el control remoto.
Opción de conexión RF:
El STB se puede funcionar en modo del RF para conectar con su TV. En este caso el conectador
de RF-OUT del STB conecta con su antena entrada en su TV. Su TV se debe ser sintonizado a
cualquier canal 3 o 4 y el STB necesita ser ajustado al canal correspondiente seleccionado en la
parte posteriora del STB utilizando el interruptor pequeño deslizante.
Opción de conexión A/V:
Si le TV equipan de una entrada de A/V, designada a veces AV1 o AVin, después usted puede
desear elegir la conexión de A/V para una imagen de mejor calidad. Una conexión del RF como
se describe anteriormente tiene una cierta limitación inherente y un poco menor de calidad que
A/V.
Por favor jaga su conexión antes de encender en sus dispositivos y conecte el cable terminado
amarillo al AV-in de su TV y AV-out en el STB. Parecidamente, conecte el cable terminado rojo y
blanco con el Audio-in en su TV y Audio-out en el STB correspondientemente.
Una vez que una conexión utiliza la opción de RF o la opción A/V se encender su TV primero y
usted es su STB. El STB es encendnido presionando el botón de la energ í a en el frente, o con el
control remoto, encienda el STB. Usted debe ver un logo que aparece en su TV mientras que el
STB se enciende.
Puesto que la programación del canal es diferente en varias regiones, usted debe ajustar su caja
encima del televisor con sus canales usando la caracter í stica de auto exploración.
Asegurece de que una antena conveniente esté conectada con la entrada de la antena, etiquetada
como RF-in en el STB, y después de encender su TV y STB, presione el botón del men ú en su
control remoto. Utilice las teclas de cursor alrededor del botón OK para mover el campo destacado
a Canal-Explorar y presione OK. Usted puede necesitar reorientar su antena para alcanzar los
mejores resultados. Si usted tiene una antena externa, puede ya haber sido orientado tales que él
punto a las estaciones del transmisor.
Para ayudar en la orientación de su antena, un indicador de la intensidad de la señal se puede
encender en el STB. Utilice el botón del men ú y seleccione la intensidad de la señal o señale
el art í culo de la calidad para demostrar una barra de la calidad de la señal en la pantalla.
Aunque la TV digital dar á una imagen muy clara cuando una señal se recibe en suficiente
intensidad, una señal débil causara salidas o sin imagen. Las estaciones an ál ogas acaban de
ser recibidas con ruido en el sonido y la nieve en el cuadro, las transmisiones Digitales se
pierden o tienen bloques grandes de las im
ág enes que faltan si la señal del RF es de intensidad o de
calidad debil.
Reorientando su antena o conseguir una antena de una mejor calidad puede solucionar este
problema. Algunos que encuentran pueden requerir para obtener los mejores resultados.
Gracias por elegir una caja encima del televisorTivax y disfrute del mundo nuevo de la televisión
Digital.

5
欢迎来到数字电视的世界
所有的机顶盒（STB）都已在工厂做过正常测试，如果您仍遇到问题，请按照以下简单
步骤去排除。
首先请确认您的电视和机顶盒（STB）都已插上电源，并且按照以下说明用 RF 线或
AV 线（端子颜色：红白黄）将机顶盒连接到电视上。另外，请不要忘记给遥控器装上
。
选择 RF 连接：
机顶盒可以通过工作在 RF 模式连接到您的电视。在此模式下，请将机顶盒的 RF-OUT
接口连接到您电视的 Antenna Input 接口。您的电视可调到3或4频道，同时您需要用
机顶盒后面的拨动开关调到与电视相应的频道。
选择 A/V 连接：
如果您的电视装有 A/V 输出端口，有时标注为 AV1 或AV In，那么您可以选用 A/V
端子连接电视获取较好的图像质量。像前面提到的，由于 RF 连接存在一定局限性，所
以图像质量要低于 A/V 显示。
开机之前，请先用黄色A/V线连接机顶盒的 AV-OUT 口和您的电视 AV-IN 口，同样
的，用红色和白色音频线连接电视和机顶盒颜色对应的端口。
连接好 RF 或A/V 线后，请先打开您的电视，再打开机顶盒。按前面的电源按键
（Power）启动机顶盒，或者用遥控器开机。机顶盒启动的时候会在您的电视上显示
TIVAX 标示。
由于不同的地区有不同的频道节目，您必须使用自动搜索功能来设置您机顶盒的频道。
请确认您已将适合的天线连接到机顶盒的天线输入端（标示为 RF-IN），然后打开您的
电视和机顶盒，按遥控器上的菜单（Menu）键，使用 “OK” 键周围的方向键将光标移
动到频道搜索（Channel-Scan）按下 “OK” 键。您也可以调整您的天线方向以搜到最
多的频道。如果您有室外天线，请确认天线已经指向了信号发射站。
您可以使用机顶盒自带的信号强度显示功能，帮助您调节天线的方向。按菜单键
（Menu）选择信号强度或信号质量这一项，屏幕会显示一个信号质量的指示条。
当信号足够强的时候，数字电视可以提供很清晰的画面，但信号比较弱的时候会出现画面
停滞或无图像显示的情况。如果射频信号强度或质量不好，模拟接收会看到图像出现雪花
并听到杂音，数字接收则会出现图像停滞或马赛克。请重新调整天线的方向或用更高质量
的天线来解决此类问题。为了获得更好的接收效果，请多试验几次。
感谢您选择了Tivax 数字机顶盒去享受数字电视的新世界。
电池

6
Table of Contents
Tivax Digital TV Converter Important Safety Instructions...................................................... 1
Important Safety Information ................................................................................................. 2
Welcome to the world of Digital TV........................................................................................ 3
Tivax Set Top Box User Manual - Let's Get Started! ............................................................. 7
High Definition Television..................................................................................................... 9
Multicast TV Signals..................................................................................................... 9
Standard Definition Television ...................................................................................... 9
How to Receive the Best Digital TV Signal with Your Antenna ............................................10
1. Initial Setup ...................................................................................................................... 11
1.1 Remote Control.......................................................................................................... 11
1.1.1 Installing the Batteries......................................................................................... 12
1.2 Front Panel and Rear Panel Illustration..................................................................... 13
1.2.1 Front Panel.......................................................................................................... 13
1.3 Connecting The Digital Converter Box ...................................................................... 14
1.3.1 Connecting Antennas .......................................................................................... 14
1.3.2 Connecting to a TV (TV Aerial) ........................................................................... 15
1.3.3 Connecting to an Audio System.......................................................................... 17
1.3.4 Quick Start Guide ................................................................................................ 18
2. On-Screen Menus............................................................................................................ 19
2.1 GUIDE........................................................................................................................ 19
2.1.1 Simple Guide....................................................................................................... 19
2.1.2 Full Guide (EPG) ................................................................................................. 19
2.1.3 Reminder List ...................................................................................................... 20
2.2 CHANNEL .................................................................................................................. 21
2.2.1 Auto Scan ............................................................................................................ 21
2.2.2 Manual Channel Set............................................................................................ 21
2.3 SETUP ....................................................................................................................... 22
2.3.1 Screen Setting..................................................................................................... 22
2.3.2 Screen Setting..................................................................................................... 22
2.3.3 Parental Control (V-Chip) .................................................................................... 22
2.3.4 Close Caption...................................................................................................... 24
2.3.5 Time Zone............................................................................................................ 24
2.3.6 Smart Antenna (If Detected)................................................................................ 25
2.3.7 Factory Default .................................................................................................... 25
2.4 INFO........................................................................................................................... 26
3. Troubleshooting ............................................................................................................... 27
4. Specification..................................................................................................................... 28
5. Glossary........................................................................................................................... 29
Tivax Limited Warranty To Original Purchaser ..................................................................... 30

7
Tivax Set Top Box User Manual - Let's Get Started!
Now you can start to receive the amazing world of Digital Television on your
analog TV.
First please read these simple questions.
Question #1: What is a Tivax Set Top Box?
Answer: It is a special receiver that interprets FREE Digital TV signals into
analog TV signals.
Question #2: If I can get ABC® or CBS® on my cable or satellite, why do I
need a Tivax?
Answer: Because you are only getting a FRACTION of the FREE signals.
Cable and satellite providers are not required to give you all FREE Digital
TV signals. Why should they? You might be very pleased with better quality
FREE Digital Television. That's the “secret” many people do not know.
Tivax gives you immediate access to FREE Digital Television signals
at no extra cost!
Question #3: If I already have cable or satellite, do I still need a Tivax to
receive the FREE Digital Television signals?
Answer: Unless you have a Digital TV set, YES. Don't worry. You can
combine your Tivax with your cable or satellite receiver. We'll show you how.
Question #4: Do I need an antenna to receive FREE Digital television signals?
Answer: Yes. Digital TV is just like old-fashioned Analog TV, only better. You
still need an antenna to get the signal. Just about any antenna will do, but an
antenna designed for Digital TV is better. While some antennas are better than
others, it also depends on where you live. If you cannot receive Analog TV
signals, you will not be able to get Digital TV signals. This is very important as
your Tivax will not work.
Question #5: How do I test my TV to see if I can use my Tivax?
Answer: This is very easy. Simply disconnect your Analog TV from your cable
or satellite receiver. Connect the antenna to your Analog TV. If you can
receive a picture, your Tivax will work. Don't worry if the picture is not perfect.
That's another special feature of Digital TV. It's BETTER! Digital TV signals
don't have the same problems Analog TV signals do. That's why this new
standard is so much better!

8
OK. You've now tested your Analog TV and demonstrated you can get FREE TV
signals without cable of satellite. Now get ready…you are about to discover the
wonderful world of FREE Digital TV!
Before we get started, here are a few easy technical terms you will need to know:
What is Analog Television?
Until recently, virtually all TVs in the USA were designed for Analog Television.
Analog TV signals were designed in the 1940s, long before computer technology
existed. Analog TV is based on an old standard called NTSC. Compared to Digital
TV signals, the Analog picture is fuzzy and very inferior to Digital TV. This is why
the US Government decided to turn off Analog TV signals in 2009.
Analog TVs cannot receive Digital TV signals. There are only 3 ways to see digital
TV signals on your Analog TV:
1. You must have a Digital TV set. Your Analog TV cannot receive the
amazing world of digital television
2. You must have a Digital TV tuner. Tivax is a Digital TV tuner.
3. You must pay for cable or satellite (remember…cable and satellite will not
show you many of the FREE signals you can receive with your Tivax).
What is Digital Television?
This is the new broadcasting standard. Digital TV signals are based on a new
standard called ATSC. In early 2009, all Analog TV signals will be turned off.
This is Federal Law. Under the new Federal Law, cable and satellite may not be
required to provide you access to all the FREE digital signals. Eventually, you
will get some of these signals, but no one knows for sure when this will happen.
It could be many more years before cable or satellite decide to give you access
to all FREE Digital TV signals.
Digital Television is very exciting and offers too many features to be listed here.
However, your Tivax Set Top Digital Receiver gives you the ability to enjoy most
of these advantages on your Analog TV set!

9
High Definition Television
The High Definition Digital TV is similar to a computer data signal. It is also
called HDTV. In other words, it is very sophisticated and can do many more
things. The broadcast station can do more interesting things with a Digital TV
signal, such as broadcast High Definition television. This is a very superior
picture.
Your Tivax will easily decode the HDTV signal. You will be able to watch HDTV on
your Analog TV. While you will NOT see the picture in its true High Definition format
(only expensive High Definition TV sets can do this), you will be very surprised with
the excellent picture quality.
The Digital TV signal is very powerful. A broadcaster can do many things with the
Digital Television signal. Sometimes, when they want to show you a very high
quality picture, they will transmit the program in High Definition. When this
happens, you will only get ONE Digital Television signal at that moment in time.
A good example when this happens if during Prime Time (8 pm to 11 pm). Football
and baseball games are commonly transmitted in High Definition.
Multicast TV Signals
The Digital TV signal is very powerful. A broadcaster can also choose to show
you more than one TV signal on the same frequency. (Analog TV cannot do this!)
A broadcaster can provide FOUR or more excellent quality signals AT THE SAME
TIME! This is called “multicasting”. Tivax can decode this signal for you! A
good example is during Day Time. Imagine signal #1 is dedicated to a soap opera,
signal #2 is dedicated to a documentary, signal #3 is dedicated to a talk show and
signal #4 is dedicated to a medical program. Only Digital TV can do this and Tivax
can decode this for you!
Standard Definition Television
This refers to a TV picture that is NOT High Definition. When the broadcaster
wants to show you more than one signal, they refer to this as Standard Definition
(as opposed to HDTV). Standard Definition TV is also called SDTV.
So. Are you ready to get started?

10
How to Receive the Best Digital TV Signal with Your Antenna
In this section we'll show you the following:
•How to find Digital TV channels in your area
•How to select the best antenna for your Tivax
•How to scan and store Digital TV channels with your Tivax
How to find Digital TV channels in your area
The number of Digital TV channels varies greatly within each local area, so it is
best to look up your available channels by visiting special web sites, such as:
www.titantv.com
www.dtv.gov
www.tvguide.com
In addition, you can also find excellent local information from performing searches
on the internet. Due to the proliferation of DTV channels, it is difficult to get the
latest information from newspapers or other printed sources.
In addition, the number of channels you receive depends on your physical location,
your antenna and the location of the broadcast antenna. Broadcast television
signals are “line of sight”, which means the best signals are received by pointing
directly at transmitter. Buildings, mountains and other obstructions will affect the
quality of the signal you receive.
Selecting Your Antenna
After you have determined the available channels in your area, you will need
to select an antenna. The mini-antenna provided with your Tivax will work in
most cases, but it may not be your best option, depending on your location.
Q. Can I use my existing indoor antenna?
A. Yes, but it may not give you the best results. Most likely, your existing
antenna was designed for analog television and is not designed specifically for
DTV. If you get good results, great! (Be sure you connect the antenna to your
Tivax.)
Q. Can I use my existing outdoor antenna?
A. Yes. This will be a much better antenna and provide you with a better DTV
signal. (Be sure you connect the antenna to your Tivax.)
Q. Do I need to upgrade my antenna?
A. If you are not pleased with the results, then this is recommended. There are
many new antennas designed for DTV and are available at most retail electronic
and other stores where televisions are sold. If your antenna provides a fair signal,
upgrading to a better quality DTV-designed antenna should help. Remember to
point the antenna in the proper direction to receive the strongest signal. Your local
retail center can provide the best advice to receive the strongest DTV signal.
Scanning & Storing DTV Channels with Your Tivax
After installing the antenna, point it towards the DTV broadcast transmitter or where
there are the largest number of DTV stations. Now you can scan for DTV channels
and store them. More information on how to scan channels is available in later parts
of the manual.

11
1. Initial Setup
1.1 Remote Control
Remote Key Function:
1. ON/STANDBY:
Press to turn your converter
box On and Standby mode.
2. NUMBER:
Press to enter channel
numbers and passwords.
3. SUB CHANNEL SELECTOR:
Press to enter a sub
channel number.
4. MENU:
Press to open or close the
on-screen menu.
5. /OK/VOL/CH:
Press to adjust channels,
to adjust volume. For On-
Screen Menu: to
move high light, [OK] to
confirm.
6. RECALL:
Press to return to last channel
viewed.
7. FAVORITE CHANNEL (UP):
Press to scan upward and view FAV
channel added into your Favorite’s
List.
8. FAVORITE CHANNEL (DOWN):
Press to scan downward and view
FAV channel added into your
Favorite’s List.
9. ADD/DEL:
Press to add viewing channel
to Favorite’s List. Press again
to remove from Favorite’s List.
10. MUTE:
Press to turn off sound. Press
again to restore sound.
11. CLOSED CAPTION:
Press to select the closed caption
mode if available.
12. EXIT:
Press to exit on-screen menu/display
bar.
13. DISPLAY:
Press to view information about the
program of channel.
14. GUIDE:
Press to open Simple/Full
Guide/Reminder List.
15. ZOOM:
Press to change the screen format
according to the screen aspect
ratio and the input signal format.
16. SIGNAL STRENGTH:
Press to show signal strength of
current channel.
17. MTS:
Press to select alternative audio
program if available.
MUTE
CH +
CH -
GUIDE
SIGNAL
FAV +
FAV - MTS
ZOOM
FAV
EXIT
MENU
VOL -
RECALL DISPLAY
VOL +
1
2 3
4
5 6
7
0
K
O
- CCD
89
1 10
11
12
13
14
15
17
16
2
3
4
5
6
7
8
9
ST B T12-

12
1.1.1 Installing the Batteries
Remove the battery cover from the remote control and put 2xAAA size batteries
inside the compartment.
The diagram inside the battery compartment shows the correct way to install the
batteries.
1. Open the cover 2. Install batteries 3. Close the cover
1.1.2 Using the Remote Control
To use the remote control, point it towards the front of the Digital Converter Box.
The remote control has a range of up to 7 meters from the Digital Converter Box
at an angle of up to 60 degrees.
The remote control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the
remote control.

13
1.2 Front Panel and Rear Panel Illustration
1.2.1 Front Panel
1 POWER ON / STANDBY BUTTON: Used to switch the set top box on and standby
(Green Light – On)
(Red Light – Standby)
2 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
1.2.2 Rear Panel
1 RF OUT: This socket will transmit the NTSC CH3/4 RF signal to your TV ANT in socket.
2 RF IN: Connect the antenna or CATV cable here.
3 CH3/4 SWITCH: Select NTSC channel (Channel 3, Channel 4).
4VIDEO OUTPUT: Connect this jack to the Video Input jack on your TV using an
Audio/Video cable. This output port supports only the SD output.
5 S-VIDEO OUTPUT: Connect this jack to the S-Video Input jack on your TV using an
S-Video cable. This output port supports better quality of video.
6 AUDIO L/R: Connect these terminals to the analog audio inputs of a TV set (i.e., to a
TV that has jacks for L/R inputs). Or connect these terminals to the L/R
inputs of a separate audio component.
7SMART ANT I/F: Connect to an external smart antenna.
8 MAIN POWER: Connect to main power supply using the power cord.
12
6
37
12
4
5
8

14
1.3 Connecting The Digital Converter Box
The following diagrams are of typical configurations only, and may differ slightly
to your existing external equipment. If you are unsure how to connect to your
Digital Converter Box, always consult your manufacturer's user manual supplied
with your equipment.
1.3.1 Connecting Antennas
This section tells how to connect an indoor or outdoor antenna to your Digital
Converter Box. You may need a 75 adaptor or a combiner.
NOTES:
A. If your antenna has separate leads for VHF/UHF signals, you will need
to purchase a combiner to combine it before connect to the receiver.
B. The Digital Converter Box can receive DTV signals in the event that a local cable
provider is passing 8VSB through on their system. (8VSB is the RF modulation
format utilized by the DTV(ATSC) digital television standard to transmit digital
bits over the airwaves to the home consumer.)
C. When Receiving Digital Cable Signal: If your cable service signal does not
comply with the ATSC requirement, this product may not operate properly.

15
1.3.2 Connecting to a TV (TV Aerial)
TV Aerial
Table below illustrates the different output from the RF Out connector.
Power Indicator Light
TV Out Mode (RF Out)
Actual Output
Standby
(Sleep) Red
Analog Pass-Through
RF signal with analog
programming from analog
broadcast stations
On
(Active)
Green NTSC CH 3/4
Analog RF signal in
channel 3 or 4 converted
from digital programming
contents broadcasted by
digital stations
Connect antenna wire to RF ANTENNA
IN on the rear of the convertor. Connect
the supplied coaxial cable wire from the
CH ¾ terminal (RF Out) to RF ANTENNA
INPUT on the rear of your TV.
To view, tune Ch 3 or 4 on your TV,
choose the channel that does not have
an active or strong signal. Slide the CH
3/4 accordingly.
Analog Pass-Through
Please follow the procedure below
when using Analog Pass-Through
1. Make sure the converter box is in
Standby mode. The power indicator
ligh
t should be red; otherwise,
press the Power button on the
converter’s remote control.
2. This step only need to perform once
after connection and it is only
require if you did not scan the local
channel before. Scan analog
channels by following the
instruction of your TV. It is the
same as connecting your TV
directly with an antenna.
3. You must use the remote control
from your TV to change channels.
RF Coaxial cable
to your TV
Over-the-air Antenna
ANTENNA IN TV OUT

16
Connecting to a TV (Composite Video & S-Video)
Composite Video
S-Video
yellow
To TV Video Input
Connect the supplied video (yellow) and
audio (red & white) cables.
To view, cycle through your television inputs
(Video 1, 2, etc) to select the source that the
convertor is connected to.
To TV Audio L/R Input
white red
For better quality, connect with an optional
S-Video cable (if your TV has this input).
Do not connect the yellow video cable when
installing the S-Video cable.
To view, cycle through your television inputs
(Video 1, 2, etc) to select the source that the
convertor is connected to.
To TV Audio L/R Input
white red
To S-Video Input on TV

17
1.3.3 Connecting to an Audio System
LR
S-VIDEO
VIDEO
AUDIOOUTPUT
AUDIOOUTPUT
Front Left
Speaker
Front Right
Speaker
Center Channel
Surround Right
Speaker
Surround Left
Speaker
Dolby Surround
Connection Example
To Dolby Surround
Equipped Receiver
(L + R Audio Input)
white red
Rear panel subject to modification

18
1.3.4 Quick Start Guide
Once all connections are made, follow this Quick Start Guide to begin viewing digital
channels immediately. It is recommended that you read the entire manual to familiarize
yourself with all of the functions available to you.
Initial Installation Guide
When the converter box is turned on for the first time or has been reset to factory default, the
Installation Guide will be displayed automatically. User can follow the Installation Guide to
set the following:
•OSD (On Screen Display) Language
•Time Zone / Daylight Savings
•Scan Channels
OSD Language
Press [ ] to select the menu language
(English, Spanich, or French)
then press [OK] to
confirm.
Time Zone / Daylight Saving
Press [ ] to select the time zone (Hawaii,
Alaska, Pacific, Mountain, Central, Eastern), the
press [ ] to move the curso to adjust the Auto
Daylight Saving using [], then press [OK] to
confirm and auto scanning will proceed.
Auto Channel Scan
Your
converter box searches for available
channels in your area and stores them in the
channel memory. To stop scan during Auto
Scan, press the [EXIT] button and the screen will
be directed to the first scanned channel.
Setup Complete
After auto channel scan is done, press [OK] to
complete the setup and began to watch TV.
OK Next Page
Installation Guide
OSD Langauge English English
Spanish
French
EXIT Stop
Installation Guide - Scan
CH5: 79.00 MHz
Total Channels Found: 2
1. CH 8-1: KFLA-LD
2. CH-8: CSTV
Progress
Quality
4%
0%
SVSB
OK
Installation Guide - Finish
Setup Completed
The system is configured as followed:
OSD Language: English
Time Zone: Hawaii (-10:00)
Daylight Savings: AUTO
Detected Digital Channel: 51
Detected Digital Frequencies: 22
Press OK to complete a setup and exit to watch TV
OK EXIT
Installation Guide - Custom
Select Time Zone Hawaii
Auto Daylight Saving Yes
Hawaii
Alaska
Pacific
Mountain
Central
Eastern
Exit
Next PagePrevious Page

19
2. On-Screen Menus
The On-Screen Menu display is for accessing and setting up preferences for
the converter.
2.1 GUIDE
2.1.1 Simple Guide
2.1.2 Full Guide (EPG)
Guide menu consists of three options:
Simple Guide, Full Guide, and Reminder List.
To display the correct information on Simple
Guide, Full Guide, and Reminder List, your
“Time Zone” must be set correctly.
Simple Guide can view program information of the
current channel.
Press [Guide] on the remote control to display or
press [MENU] on the remote control to display the
On-Screen Menu and follow the steps below:
1. Using
arrow buttons to
highlight “Simple Guide”, [OK] to
enter.
2.
While highlighting a program,
press [OK] to add or release the
program to the Reminder List.
Full guide or Electronic Program Guide (EPG) is the
electronic equivalent of a printed TV program guide.
You can view a list of programs scheduled for the
next few hours.
Press [Guide] on the remote control to display the
On-Screen Menu and follow the steps below:
1. Using
arrow buttons to
highlight “Full Guide”, [OK] to
enter.
2.
Press arrow buttons to
move/show desired information.
Today
The Ellen DeGee Show
16:00-17:00
TV-G
Actor Ewan Mcgrady (”New Movie Title”)
FAV+
Next Day
FAV-
Prev Day
GUIDE
Reminder List
OK
Move Scroll
EXIT
Exit
Change Channel
Date
Time
2-1 4-1 KNBC-LA 4-2 4-4
CC
CC
CC
Channel 4 News
17:00-18:00 Williams, Mayer
Channel 4 News
18:00-19:00 Williams, Mayer
OK Enter
MENU
Exit
EXIT
Previous PageMove
Channel
Setup
Guide
Simple Guide
Full Guide
Reminder List
Time / Date
Guide
Info.
Simple Guide
Channel Time/Date
16:00
17:00
18:00
18:30
Show Name/Title
Channel 4 News
Channel 4 News
Nightly News
GUIDE
Full
EXIT
Exit
OK Reminder/Release