Topaz A-TSL2-1 Installation instructions manual

Copyright © 2020 Topaz Systems Inc. All rights reserved.
For Topaz Systems, Inc. trademarks and patents, visit www.topazsystems.com/legal.
Tilt Stand (A-TSL2-1) Mounting Guide
GemView 10 Tablet Display (TD-LBK101)

2 www.topazsystems.com Back to Top
Tilt Stand Mounting Guide (GemView 10)
Overview
The Topaz GemView Tilt Stand (A-TSL2-1) is designed to hold the Topaz GemView 10 and 10
Touch Tablet Display. With the tilt stand’s 360-degree rotation and up-to-45-degree tilt, your
tablet display can be easily positioned during the signing process.
The GemView Tilt Stand can be used with the following pads (model numbers beginning with):
•TD-LBK101 (GemView 10 and 10 Touch)
Included with the A-TSL2-1 is the tilt stand, dual-sided screwdriver, and four screws.

5 www.topazsystems.com Back to Top
Tilt Stand Mounting Guide (GemView 10)
Pad Mounting Instructions
1) Flip the tablet display over to reveal the mounting holes for the tilt stand base.

6 www.topazsystems.com Back to Top
Tilt Stand Mounting Guide (GemView 10)
2) Flip the tilt stand over to align the 4 screw holes with the ones on the GemView 10.

7 www.topazsystems.com Back to Top
Tilt Stand Mounting Guide (GemView 10)
3) Rotate the bottom of the tilt stand, if necessary, for easier access in the next step.
4) Starting on the right side, insert 2 of the screws and tighten using the provided
screwdriver.
5) Repeat on the left side. Your tilt stand is now securely attached to the GemView 10.