Please read the following safety and operating instructions before using your
Product. Keep the information near your Product for future reference. Also,
please be sure to read your electronic User’s Guide as it contains additional
important Safety Information.
Indicates a potentially hazardous
situation which, if not avoided,
could result in serious injury.
AC Adaptor
Always use the Toshiba AC adaptor
that was provided with your device
or as specified by Toshiba and use
correct power source specified on
the regulatory label of device or
adaptor. Always ensure a secure
electrical connection. Be careful if
you use a multiple connector to avoid
current overload on one socket.
Battery Pack
Do not expose the battery
pack to heat or shock.
Disassembly, Modification or
Tampering
Do not disassemble, modify, tamper
with or repair your device (including
AC adaptor or power cable/cord).
Choking Hazards
Keep device away from small
children. This device is not a toy and
may be hazardous to small children,
for example, small detachable
parts may be a choking hazard.
Cleaning
Unplug device from the electrical
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
The injected combustible gas
produced by these types of cleaners
may remain inside of your product.
The electrostatic spark from the
motor or contact point of switch may
ignite the gas residue, which could
result in an explosion, fire, or burn
injury. Instead use a lightly dampened
cloth for cleaning in general and
remove dust with a dry cloth.
Hot Surfaces
Allow the equipment’s internal
components and hot-pluggable
drives to cool before touching them
Power Cables/Cords and Power
Source
Always use power cables/cords and
power sources that comply with the
voltage and frequency specifications
and requirements of the country of use.
Service Provider
Disconnect device from the electrical
outlet and take device to an
authorized Toshiba service provider if:
• AC adaptor or power cable/cord is
damaged.
• Liquid has spilled into device or an
object (such as a screw, staple or
paper clip) has entered device.
• Device has been dropped,
subject to shock or impact and/or
damaged in some way.
• Noticeable signs of overheating,
smoke, deformation, cracks, leaks
or unusual odor occur.
• Service is needed on component
inside compartments requiring
opening or removal of covers.
General Safety
Instructions
