Tosot SMART Series User manual

USER MANUAL
SMART SERIES
Willis Inc.

Page 2 sur 18
Table des matières
Declaration of Conformity............................. 3
Specifications ............................................... 4
Precautions................................................... 5
Technical solution......................................... 6
Operation instruction .................................... 8
User registration......................................... 12
Network configuration................................. 14

Page 3 sur 18
1
Declaration of Conformity
Hereby, we declare that this AC is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity may
be consulted with sales agent.

Page 4 sur 18
2
Specifications
Model: OSK102
Standard: IEEE 802.11b/g/n
Antenna Type: External omnidirectional Antenna
Frequency: WIFI 2.4G
Maximum Transmitted Power: 15dBm Max
Dimension: 55*24*8(mm)
Operation Temperature: 0°C~45°C/32°F~113°F.
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA

Page 5 sur 18
3
Precautions
• Applicable system: IOS, Android. (Suggest: IOS 7.0 or later
Android 4.0 or later) Please check the service website for more
applicable devices.
• Disclaimer: Due to the special situation existed during App use,
we explicitly claim as bellow: Not all of the Android and IOS
systems are compatible with the APP. We will not be
responsible for any issue as a result of the incompatibility
• SMART KIT wireless safety strategy. Smart kit Only support
WPA-PSK/WPA2-PSK encryption and none encryption. WPA-
PSK/WPA2-PSK encryption is recommended.
• Smart Phone camera needs to be 5 million pixels or above to
make sure scan QR code well.
• Due to different network situation, sometimes, request time-out
could be happened, thus, it is necessary to do network
configuration again.
• Due to different network situation, sometimes, control process
may return time out. If this situation occurs, do not feel
confused, the display on board and APP may not be the
same.

Page 6 sur 18
4
Technical solution
1.WIFI Router Home Control Mode.
A WIFI router is needed at this mode. Smart phone and
connect to the AC through the WIFI router conditioner.
1. Smart Phone
2. Smart Air conditioner
3. WIFI Router

Page 7 sur 18
2. How to install the smart kit
1. Remove the protective cap of the smart kit
2. Open the front panel and insert the smart kit into
the reserved port
3. Attach the QR code packed with SMART KIT to
the side panel of the machine, ensure it is
convenience to be scanned by a mobile phone.

Page 8 sur 18
5
Operation instruction
1. Download the “Nethome plus” App
NetHome Plus
Iphone Users:
Scan QR Code or go to App Store and click on the link
below (or search for NetHome Plus app on the App
Store) and download it.

Page 9 sur 18
• QR CODE
• APP STORE
https://itunes.apple.com/us/app/nethome-
plus/id1008001920?mt=8
Android users:
Scan QR Code or go to App Store and click on the link
below (or search for NetHome Plus app on Google
Play Store) and download it.

Page 10 sur 18
• QR CODE
• PLAY STORE
https://play.google.com/store/apps/details?id=com.midea
.aircondition&hl=fr

Page 11 sur 18
2. Set your air conditioner to AP mode
The procedure includes the following steps:
1. Disconnect the power supply of AC
2. Connect the power supply
3. Continuously press the « LED » button of your
remote control
4. Once your air conditioner displays « AP », that’s
mean the configuration is OK
Kindly reminder
• When the AC WIFI entered into WIFI Network Setting Mode, the Air-
conditioning remote control can't open the AC. It needs to wait 3-5
minutes or when the AC finishes the WIFI Network Setting Mode, then
the Air-conditioning remote control can control AC normally.
• If there is no set operation under WIFI Network setting mode, AC will
quit this mode automatically 8 minutes later and then the user can
control the AC normally.

Page 12 sur 18
6
User registration
Please ensure your mobile device is connected to Wi-Fi
router. Also, the Wi-Fi router has already connected to
Internet before doing user registration and network
configuration.
1. Click on « Create Account »
2. Enter your email address and password, and then
click Registration.
3. Active your registration by clicking on the link you
receive on your email address

Page 13 sur 18
Caution :
• It is necessary to forget any other around network and make sure the
Android or IOS device just connect to the WIFI network you want to
configure.
• Make sure the Android or IOS device WIFI function works well and can
be connected back to your original WIFI network automatically.

Page 14 sur 18
7
Network configuration
‣Android device
• Press « add device »
• Scan the « QR code » you add on your AC

Page 15 sur 18
• Select your own Wi-Fi network, for example My
Home (the picture is only for reference)
• Enter your own « Wi-Fi router password » and click
« OK »
• Configuration Success, you can see the device on
the list.

Page 16 sur 18
‣IOS device
• Press on « add device »
• Scan the « QR code » you add on your AC
• Read the instruction above and press the “home”
button of your phone to return to the device interface

Page 17 sur 18
• Click « setting » to enter the setting page select
WLAN/WIFI
• Choose « net_ac_XXXX »

Page 18 sur 18
• Type default password: « 12345678 » and click
« Join »
• Return to « APP » and click « Next »
• Select your own Wi-Fi network, for example My Home
(the picture is only for reference)
• Enter your own Wi-Fi router password and click
« OK »
• Configuration success, you can see the device on
the list
Note:
Company will not be liable for any issues and problems caused by Internet,
Wi-Fi Router and Smart devices. Please contact the original provider to get
further help.