TOUGHBUILT S510 User manual

UNIVERSAL 195CM MITRE SAW STAND
TB-S510
! WARNING
WWW.TOUGHBUILTTOOLS.COM.AU
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.
TO REDUCE RISK OF SERIOUS INJURY,
THOROUGHLY READ AND COMPLY WITH
ALL WARNINGS AND INSTRUCTIONS IN
THIS MANUAL AND ON PRODUCT.
KEEP THIS MANUAL NEAR YOUR STAND FOR
EASY REFERENCE AND TO INSTRUCT OTHERS.
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

TABLE OF CONTENTS
SAFETY SYMBOLS
Some of the following symbols may be used on your tool. Please study
them and learn their meaning. Proper interpretation of these symbols
will allow you to operate the tool better and safer.
01
Safety Symbols
Safety
Features
Parts List & Tools Needed
Bolts, Nuts, Washers
Assembly Instructions
Mounting Instructions
Adjustment Instructions
Tool Mount Adjustment
Transporting & Storing
Maintenance & Notes
01
02
03
04
05
07
11
13
14
15
16
NAME
Kilograms
Wear gloves
Warning symbols
Read the operator’s Manual
Wear safety glasses
Wear respiratory protection
Wear hearing protection
DESIGNATION / EXPLANATION
Weight
Wear gloves to reduce risk of injury
Alerts used for warning messages
To reduce the risk or injury, read and
understand operator’s manual
Operation of power tool can result in
foreign objects being thrown into eyes
Use of this tool can generate dust which
may cause respiratory injury
Noise from this product can contribute to
hearing loss
SYMBOL
kg
This symbol designates that this tool is listed by Underwriters
Laboratories, to United States and Canadian Standards.
This symbol designates that this tool is listed by Underwriters
Laboratories.
This symbol designates that this tool is listed by the Intertek Testing
Services, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Canadian
Standards Association, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Canadian
Standards Association.
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

DESIGNATION / EXPLANATION
Weight
Wear gloves to reduce risk of injury
Alerts used for warning messages
To reduce the risk or injury, read and
understand operator’s manual
Operation of power tool can result in
foreign objects being thrown into eyes
Use of this tool can generate dust which
may cause respiratory injury
Noise from this product can contribute to
hearing loss
SAFETY
GENERAL SAFETY INSTRUCTIONS FOR TOOLS
Using tools of any kind can be dangerous if safe operating
procedures are not followed. Recognising the hazards of each tool and
using them with respect and caution will considerably limit the possibility
of personal injury. However, if safety precautions are ignored, personal
injury will likely result. Always use common sense; your personal safety
is your responsibility.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols, and explanations with them, deserve your careful attention
and understanding. The symbol warnings do not by themselves eliminate any
danger. The instructions and warnings they give are no substitutes for proper
accident prevention measures.
! WARNING
BE SURE TO READ AND UNDERSTAND ALL SAFETY INSTRUCTIONS IN THIS
MANUAL, INCLUDING ALL SAFETY ALERT SYMBOLS SUCH AS “DANGER”,
“WARNING” AND “CAUTION”, BEFORE USING THIS TOOL. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS PERSONAL INJURY.
! DANGER Failure to obey this warning WILL result in death
or serious injury to you or to others. Always follow
the safety precautions to reduce the risk of
personal injury.
Safety alert symbol: Indicates DANGER, WARNING,
or CAUTION. May be used in conjunction with other
symbols or pictographs.
! WARNING Failure to obey this safety warning CAN result in
death or serious injury to you or to others. Always
follow the safety precautions to reduce the risk of
personal injury.
! CAUTION Failure to obey this safety warning MAY result in
personal injury to you or others or property damage.
Always follow the safety precautions to reduce the
risk of personal injury.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Know your tool. Read and understand the Operator’s Manual and observe the
warnings and instruction labels affixed to the tool.
Properly ground all tools.
Keep guards in place.
Remove adjusting keys and wrenches.
Keep work area clean and dry.
Keep children away.
Never leave running machines/tools unattended.
Disconnect tools for service.
Use correct tools for the job.
Never force a tool.
Wear safety apparel.
Wear safety glasses/goggles.
Never stand or sit on tools.
02
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

You have just purchased a S510 Universal 195cm Mitre Saw Stand. This
product has been specifically designed to assist you in the use of your 25-30cm
mitre saw, as well as increasing efficiency with other bench top tools such as
table saws, band saws, scroll saws, planers, etc.
Your S510 Universal 195cm Mitre Saw Stand is loaded with standard features
all designed and engineered to maximise the functionality and flexibility of
your Mitre Saw Stand.
• Universally compatible with most brands of mitre saws
• 2 work supports extend to 195cm
• Rugged 21.1cm solid rubber tyres roll effortlessly over rough
terrain, are stable and never go flat.
• Universal Tool Mounts allow saw to be used off the stand with level base
• Tool Mount twist locks are rugged and easy to use.
• Work stops left and right.
• Material support pegs allow safe & simple storage of materials off of the
ground.
• Easy cam locks for the material support extensions can be used
one-handed.
• 6.1cm cross beam creates an extremely strong structure.
• Quick-release leg locks make set-up and take-down simple.
SAFETY
03
1.
2.
3.
4.
5.
Use caution when folding or unfolding legs to limit any finger pinch points.
Place stand on flat and level surface to keep from rocking or tipping.
Make sure that work support extensions are within safe operating limits, and are
properly locked in place before using tool. Do not exceed 226 kg. on main frame
table.
Test the setup for stability before proceeding with work.
Be sure the mitre saw is tightened securely at all mountings before use or folding
the stand for transport.
SAFETY INSTRUCTIONS
FEATURES
14.
15.
16.
17.
18.
Replace damaged components immediately.
Make sure your work platform is sufficiently sturdy to do the specific job at hand.
Properly anchor blade for job being done.
Use correct blade for job being done.
Think Safety. Safety is a combination of operator awareness, common sense and
alertness at all times.
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

1
2
3
4
5
6
7
8
9
10
Description
Stand & Rails
Universal Tool Mounts
Offset Mounting Bracket
21.1cm Solid Rubber Wheel
Axle Plate
Work Support
Work Stop
Pull Handle
M8x16 Carriage Bolt
M8x55 Carraige Bolt
Part Number
TB-S510-P-001
TB-S510-P-002
TB-S510-P-003
TB-S510-P-004
TB-S510-P-005
TB-S510-P-006
TB-S510-P-007
TB-S510-P-008
TB-S510-P-009
TB-S510-P-010
Qty.
1 pc
2 pcs
2 pcs
2 pcs
1 pcs
2 pcs
2 pcs
1 pc
2 pcs
4 pcs
11
12
13
14
15
16
17
18
19
Description
M8x25 Inside Hex Bolt
M8x16 Inside Hex Bolt
Φ8 Flat Washer
Φ8 Spring Washer
M8 Nut
M6X55 Carriage Bolt
M6 Knob Nut
M8x15 Knob
"C" clip
Part Number
TB-S510-P-011
TB-S510-P-012
TB-S510-P-013
TB-S510-P-014
TB-S510-P-015
TB-S510-P-016
TB-S510-P-017
TB-S510-P-018
TB-S510-P-019
Qty.
2 pcs
2 pcs
10 pcs
10 pcs
10 pcs
2 pcs
2 pcs
2 pcs
4 pcs
04
TOOLS NEEDED
PART LISTS
**PARTS MAY CHANGE WITHOUT FURTHER NOTICE.
13mm 10mm
5 x 15cm
PHILLIPS 6mm HEX KEY /
HEX SPANNER
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

05
9
10
11
12
13
14
M8x16 Carriage Bolt
M8x55 Carriage Bolt
M8x25 Inside Hex Bolt
M8x16 Inside Hex Bolt
Φ8 Flat Washer
Φ8 Spring Washer
2 pcs
4pcs
2 pcs
2 pcs
10 pcs
10 pcs
BOLTS, NUT, WASHERS
15
16
17
18
19
M8 Nut
M6x55 Carriage Bolt
M6 Knob Nut
M8x15 Knob
“C” Clip
10 pcs
2 pcs
2 pcs
2 pcs
4 pcs
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

76 9,13,14,15 10,13,14,15
11,13,14,15
16
12
4
19
12,13,14,15
3
17
8
18
5
06
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

ASSEMBLY INSTRUCTIONS
07
14
1
13
15
8
STEP 1
STEP 2
STEP 2
STEP 1
11
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

1
14
13
5
12
STEP 1
4
5
19
19
STEP 2
STEP 1
08
15
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

09
STEP 2
STEP 1
16
17
7
6
6
1
MATERIAL SUPPORTS extend out to 195cm
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

10
MATERIAL PEGS store material off of the ground
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

11
OFFSET BRACKETS
USE FOR MITRE SAWS WITH DIFFERENT
HOLE PATTERNS AND/OR OVERSIZED BASES
15
14
13
9
2
3
1
STEP 1
MOUNTING INSTRUCTIONS
10
13
14
15
2
STEP 1
a
b
! WARNING
TOOL MOUNTS MUST BE PARALLEL TO EACH OTHER.
LENGTH “a” MUST BE EQUAL TO LENGTH “b”
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

12
STEP 1
STEP 2
! WARNING
USE THE SAW HANDLES
TO SET THE TOOL MOUNT
ASSEMBLY ON THE STAND
! WARNING
THE SAW WEIGHT
MUST BE CENTERED
BETWEEN THE TWO
RAILS
THE BACK REST OF THE SAW
SHOULD BE APPROXIMATELY
ALIGNED WITH THE REAR RAIL
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

13
ADJUSTMENT INSTRUCTIONS
STEP 1
STEP 2
STEP 2
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2
STEP 2
STEP 1
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

14
TOOL MOUNT ADJUSTMENT
IF THE TOOL MOUNT DOES NOT LOCK SNUGGLY ON
THE RAILS, ADJUST THE SCREWS AS FOLLOWS.
STEP 1
STEP 2
10MM WRENCH
5X15CM PHILLIPS
SCREWDRIVER
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

15
TRANSPORTING & STORING
! WARNING
STEP 1
COLLAPSE EXTENSION RAILS TO
THE MOST COMPACT POSITION
STEP 2
UNLOCK AND SLIDE THE SAW
AWAY FROM THE HANDLE SIDE.
THEN RE-LOCK THE TOOL MOUNTS.
STEP 3
PRESS THE LEG-LOCK LEVERS,
COLLAPSE THE LEGS UNTIL THE
LOCK PINS ENGAGE.
STEP 4
GRASP THE PULL HANDLE AND
ROLL LIKE A WHEELBARROW.
STEP 1 STEP 1
STEP 2
STEP 3
STEP 3
STEP 4
STEP 3
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

AUSTRALIAN OFFICE CONTACT DETAILS
Phone: [phone]
Fax: [phone]
Email: [email protected]
Website: www.kincrom.com.au
UK OFFICE CONTACT DETAILS
Mail: Kincrome UK Ltd PO Box 646 Eastleigh s050 ONA
Email: [email protected]
Website: www.kincrom.com.au
16
MAINTENANCE
NOTES
CONTACT
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use
clean cloth to remove dirt, dust, oil, grease, etc.
©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.

©COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.
TB-S510
KC
WWW.TOUGHBUILTTOOLS.COM.AU
FOR PRODUCT INFORMATION VISIT