TP-Link HA100 User manual

Q1. Why can’t I pair the Music Receiver?
A. The Music Receiver is ready to be paired only when its LED turns white. Check the LED.
If it is o, re-plug the power cable or try another power outlet.
If it is blue, check your other paired devices and end the connection.
Q2. What can I do if my music does not come out from my stereo?
A1. Make sure your smart device and the Music Receiver are successfully connected, within 20
meters (66 feet) of each other, and within a direct line of sight. The Music Receiver will be
disconnected if your device's Bluetooth signal is blocked, interfered, or out of range for
longer than 5 minutes.
A2. Make sure your stereo and the Music Receiver are correctly connected via one of the
provided audio cables, and both are powered on.
A3. Make sure the volume on your music player and stereo are at an audible level.
FAQ
©2017 TP-Link 7106507772 REV2.0.2
1. On the currently paired device, end the connection by:
Disabling Bluetooth or disconnecting TP-Link_Music, or
Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled
Android devices)
2. On another device, pair to the Music Receiver, then play and enjoy music!
Bonus Tips
After pairing a second device, you can restore connection of the former device to
enjoy music from them in turns. Simply pause music on one device and play on the
other one.
Note that audio may delay when switching from an iOS device.
Play Music on Another Smart Device Quick Start GuideHA100
Bringing Bluetooth to your home stereo
NFC-Enabled
Bluetooth Music Receiver
Technical Support
Tel:
E-mail:
Web:
[phone]
[email protected]
http://www.tp-link.com/support
For more information, please visit:
www.tp-link.com

It's music time!
Keep in mind that you can play your music from up to 20 meters (66 feet), within a
direct line of sight.
Add Bluetooth to your home stereo as shown. The LED on the Music Receiver will turn
white.
* Two audio cables are provided. Choose the one that suits your home stereo. More: Want to play music on another smart device? Flip the paper for instructions.
1. On your Android device, enable NFC (Near Field Communication) in Settings.
2. Place the back of your device against the Music Receiver or provided NFC Tag until the
pairing request pops up.
3. Conrm the pairing request.
Method 2: NFC pairing (Only for NFC-equipped Android devices)
AUX L R
Music ReceiverOutlet Stereo
AUDIO INPUTAUX INPUT
or
Audio cable*Power cable
Method 1: Bluetooth pairing
1. On your smart device, enable Bluetooth in Settings.
2. Pair TP-Link_Music in the list of found devices.
Connect
1
Pair
2
Enjoy
Place against NFC Tag
or
NFC
TapHere
Tips: For convenient pairing, you can stick the provided NFC Tag to a handy
object within 20 meters (66 feet) from the Music Receiver.
NFC
ON
NFC
O: Powered o
White: Ready to be paired
Blue: Bluetooth connected