Trademark DE1 User manual

TradeMark Dust Extractor
INSTRUCTION MANUAL

DE1 Wet & Dry Dust Extractor & Vacuum Cleaner
1. Product Characteristics
I. Dust Extractor, Vacuum Cleaner for Wet and Dry;
II. Jacks on the base, easy for depositing accessories;
III. Includes external outlet and features delayed start function which can
be utilized together with other power tools.
2. Body Parts Names

2. Included Accessories
Use the right accessories according to different situations.
Round brush for bookshelves, windows and tables, etc.
Bibulous brush for floor and carpets, etc.
Crevice nozzle for crevices, corners, etc.
Cloth Bag

3. Safety Instructions- ALWAYS WEAR PPE
I. Check before operation that the local power supply is the same as the
specification on the rating label.
II. Do not use the machine in combustible and explosive places or near
flammable products; if the motor sparks it could cause a fire or
explosion.
III. Do not jam the air inlet mouth which will cause the Dust Extractor to
overheat and burn out the motor.
IV. Do not extract combustible and explosive objects and liquids; such as
glowing cigarettes, gasoline, turps etc.

V. Do not extract sharp objects such as; screws, nails blades etc.
VI. Do not extract objects which will adhere to the filter such as;
calcareousness powder, gesso and graphite powder which will block
the ventilation and eventually burn out the motor.
VII. Do not overturn the machine, if there is water in the machine, it could
fall into the motor which could cause an electrical hazard and /or burn
out the motor.

VIII. Warning: If the machine overturns when filled with water, do not use
the machine until the motor is 100% dry
IX. Warning: If water outflows from air outlet mouth, do not overturn the
machine in case water goes into the motor and causes damage. Do not
use this machine as a pump to prevent damaging the motor.
X. Turn off the machine and remove the plug each time after using or
when being repaired.
XI. Keep the machine away from direct sunlight for lengthy periods of time
and avoid storing in high temperature rooms near heaters and
furnaces- plastic can distort.
XII. Do not rest items, step or run over the hose to avoid crimping and
splitting
XIII. Do not immerse the barrel cap into the water or wash with water
XIV. In the case of water entering the electrophorus parts, to avoid injury,
complete the following steps; Immerse the dishcloth, then dry it.
Finally, wipe off dirt gently.
XV. The power cord must be replaced by the designated professional
repairer.

4. Connecting Accessories
•Connecting the Hose
Insert the hose connector all the way into the air inlet mouth and turn
anticlockwise.
•Removing the Hose
Turn the hose clockwise and pull out.
•Connecting Accessories as per image below.

5. Operating the Machine
oInsert the plug into the supply socket and switch on the machine
oAirflow strength can be adjusted as demonstrated in right image below.
oTHE HEPA FILTER AND CLOTH BAG MUST BE REMOVED WHEN USING
FOR WATER CLEANING/EXTRACTING
6. Maintenance
Barrel Cleaning
•When the barrel is filled with dust, the suction will reduce
considerably, in this case, follow the steps below:
I. Switch off and disconnect the power chord
II. Clean the dust away from the barrel
III. Unfasten the locking knobs and lift up the top cover
IV. Remove the filter bag and clean the dust away in the dust barrel
V. Re-install the filter bag, place the top cover on the barrel and fasten
the locking knobs
VI. Switch on the machine

•When the barrel is filled with water, the machine will cease suction
and the sound of the machine will heighten. In this case follow the
steps below:
I. Switch off the machine and disconnect the power chord
II. Unfasten the locking knobs and lift up the top cover
III. Empty the water from the barrel in a safe place away from the motor
IV. Place the top cover back on the machine and lock in
V. Ensure the motor is free of water and switch the machine back on
Filter Bag Cleaning
I. When the HEPA Filter is filled with dust, wash with warm water
until clean
II. When the Cloth bag is filled with dust, empty and wash with warm
water
Dry both filters before use.
7. Tech-data
Model
Power(W)
Voltage
Frequency
DE1
1400
AC220-240V
50/60Hz
ALWAYS WEAR PPE