TRIBU LUNA User manual

LUNA LAMP
USER MANUAL
English – Original user manual
Version 1.0 issued on 04-05-23

2

3Luna lamp • User manual
CONTENT
Introduction 4
The story of Luna 4
Safety instructions 5
Intended use 5
Disclaimer 6
Recycling 6
Compliance 7
Simplified EU declaration of
conformity 7
FCC 7
RSS of Industry 8
Product overview 9
Parts list 9
Specifications 10
Installation 11
Check the contents of the package 11
Assembling the lamp 11
Charging the lamp 12
Operating the lamp with the button 13
Installing the app 13
Connecting with the lamp 14
Use 16
Controlling the lamp 16
Create a group 20
Programming 22
Sharing 24
Maintenance 26
Replacing the LED light (non-user
replaceable) 26
Cleaning the lamp 29
Troubleshooting 29

4
INTRODUCTION
Congratulations on the purchase of your Luna lamp.
This user manual contains all the necessary information for the correct, ecient and
safe use of your lamp. We encourage you to read this information carefully before
installing or using the product.
We recommend to store this user manual in a safe place with the product for future
reference.
THE STORY OF LUNA
A party with friends gave the founding partners of international design agency Yabu
Pushelberg the idea to create Luna, a collection of wireless mood lanterns that
connect people with nature.
Versatile contemporary design, uniting people with their environment, smart
inaugural lighting, multi-purpose design. The Luna portable lanterns excel at what
they were designed for: connecting people with their surroundings.

5Luna lamp • User manual
SAFETY INSTRUCTIONS
⚠Only use the product as described in this manual.
⚠Do not use a damaged product.
⚠Do not use the product if a part is damaged or defective. Replace a damaged or
defective part immediately.
⚠Do not drop the product and avoid bumping.
⚠Do not immerse the product in water.
⚠Always switch o the lamp before installation or maintenance work.
⚠Only charge the lamp with an USB-C cable. Any other USB types may damage
the lamp.
⚠Do not charge the lamp outdoors. Only charge the lamp indoors.
⚠Any changes made to the product can have consequences for safety, correct
operation and warranty procedures.
⚠The light source contained in this product shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
⚠The disposal of the battery should be in compliance with local regulations.
⚠Do not incinerate the battery.
INTENDED USE
The product is only intended as indoor or outdoor LED lighting. Any change to the
product can have consequences for safety, warranty and correct operation.

6
DISCLAIMER
Designs and specifications are subject to change without notice. All logos, brands
and product names are trademarks or registered trademarks of their respective
owners and are hereby recognised as such.
RECYCLING
⚠The disposal of the battery should be in compliance with local regulations.
Our products are packaged in environmentally friendly materials that can be
recycled, disposed of or destroyed without endangering the environment.
This symbol indicates that a product should not be thrown away
with other household waste throughout the EU to prevent
possible harm to the environment or human health by
uncontrolled waste disposal. You are responsible for recycling in
order to promote the sustainable reuse of raw materials.

7Luna lamp • User manual
COMPLIANCE
Luna complies with Low Voltage, EMC, Ecodesign and RoHS directives.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Tribù NV declares that the radio equipment type lamp is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: www.tribu.com/en/collections/luna/lamp/
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device must not cause harmful interference, and (2)
the user must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

8
If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a dierent circuit from the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with the FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm between the
source of interference (in this case Bluetooth) and your body.
RSS OF INDUSTRY
This device complies with Industry Canada’s licence-exempt RSS. Operation is
subject to the following two conditions:
(1) This device must not cause interference; and
(2) This user must accept any interference, including interference that may cause
undesired operation of the device.
To maintain compliance with RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the lamp and your
body.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Pour maintenir la conformité aux directives d’exposition aux radiofréquences, cet
équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le
radiateur et votre corps.

9Luna lamp • User manual
PRODUCT OVERVIEW
A
J
I
B
C
D
E
F
G
H
PARTS LIST
A) Handle
B) Light diuser
C) LED light
D) Lamp shade
E) Base
F) Cable
G) Locking ring
H) Base plate
I) USB-C port
J) On/o button

10
SPECIFICATIONS
Power 2.5 W
Light source Dimmable LED included
Voltage 9 - 12.6 V
Wattage 2.5 - 3.5 W
Average lifetime 30.000 hrs
Cycles on/o ≥ 10.000
Starting time Within 1 sec
Warm-up time to 60% of
the full light output
Immediate full light output
Light source dimensions 178 × 85 mm
Luminous flux 190 Lumen
Luminous ecacy 80 Lumen/Watt
Lumen maintenance 95% 3600H
Colour rendering index Ra.80
Energy class G
Charging Power adaptor and cable included, 4 hrs of charging
time
Control Via Bluetooth connection
Dimming Can be dimmed via Bluetooth connection
Nominal frequency 2402 – 2480 MHz
Maximum transmission
power
4 dBm
IP rating IP65
Operating temperature 0 ~ 30°C

11Luna lamp • User manual
INSTALLATION
CHECK THE CONTENTS OF THE PACKAGE
Check if all parts from the parts list are present and that no damage is visible on the
parts. If parts are missing or damaged, please contact your local Tribù dealer.
ASSEMBLING THE LAMP
1. Screw the lamp shade onto the base.

12
CHARGING THE LAMP
1. Install a plug type on the adapter that matches your wall socket.
2. Connect the adapter to a wall socket and the lamp.
⚠Only charge the lamp with an USB-C cable. Any other USB types may damage
the lamp.
⚠Do not charge the lamp outdoors. Only charge the lamp indoors.
3. Charge the battery for at least 4 hours.

13Luna lamp • User manual
OPERATING THE LAMP WITH THE BUTTON
Press the on/o button to toggle between dierent levels of brightness:
x30 % brightness
x60 % brightness
x100 % brightness
x0 % brightness (OFF)
INSTALLING THE APP
1. Download the Tribù app for Android or iOS on your phone via Google Play or the
Apple App Store.
2. Switch the lamp on.
3. Activate Bluetooth on your phone.

14
CONNECTING WITH THE LAMP
1. Press and hold the on/o button for 10 seconds to reset the lamp.
The lamp will blink to confirm a succesfull reset.
2. Press the on/o button once to switch the lamp on.
3. Open the Tribù app on your phone.
4. Tap Devices on the bottom of your screen.
5. Tap Add a device.

15Luna lamp • User manual
6. Tap the Bluethooth icon.
The app will automatically connect to the nearest lamp.
If the connection is succesfull the lamp will blink.
7. Once connected, the lamp will show up in the My devices tab.
Repeat steps 1 – 3, if you want to connect more lamps.

16
USE
CONTROLLING THE LAMP
1. In the My devices tab, tap the on/o button to activate or deactivate the lamp.

17Luna lamp • User manual
2. Tap the lamp to reveal more functions:
1. Activates or deactivates the lamp.
2. Controls the light intensity and displays the lifetime of the battery.
3. Add this lamp to your preferred devices.
4. Displays the intensity of the light.
4
2
1
3

18
3. Return to the My devices tab and tap the cog.
Another cog will appear next to the lamp.

19Luna lamp • User manual
4. Tap the other cog to reveal the Create/Edit Module with several options:
1. Change the name of your lamp.
2. Deactivate the button on the lamp. This can only be reactivated using the
app.
3. Activate Deep Sleep mode. In this mode the lamp is turned o and the
battery is preserved. It can only be activated with the physical on/o button.
4. Under Technical information you can find developer information.
5. Check for updates.
5
4
3
1
2

20
CREATE A GROUP
If you have several lamps, it is practical to link them together so that you can operate
them as a group at the same time.
1. Go to the Groups tab.
2. The default group contains all of your lamps.
3. To create your own group, tap Create a Group.