Trilobe Les Matinaux User manual

user manual

v
Paving way oa new reading
ossing time. 
time. liberated.
trilobe

6. our ambition
8. reading time differently
10. technical specificities
12. the trilobe watch
14. winding system
16. setting your trilobe watch
18. adjusting the folding clasp
20. changing the strap and clasp
22. maintenance
24. precautions
26. quality
28. warranty
30. services and contacts
Summary

This user manual is valid for Trilobe inaugural series.
To know more about Trilobe watches:
www.trilobewatches.com
Our
ambition
Trilobe reverses the reference system of watchmaking: time starts
moving, while its indicators become fixed. As the components of time
move away from traditional codes, they urge us to take a different look
at the passing of time.
Trilobe
Time. Liberated.
our ambition was born out of a desire
to explore new possibilities in the world
of watchmaking

Reading time
differently
the trilobe watch reverses
the display, putting the
motion of time at its centre
and fixing its indicators
· Time is given by the combination of three fixed Trilobes
pointing to moving rings
· Time’s components (Hours, Minutes and Seconds) have a
separate display (Trilobe indicator and ring), enabling it to
move independently and without the superposition of one over
another
· Presentation of each component is enhanced by the sizing of
the three rings, from largest for hours to smallest for seconds
· Each ring moves in a counter clockwise direction
· Time is displayed by the combination of the three rotating rings,
respectively graduated for hours, minutes and seconds, and three
fixed trilobes, pointing at these moving rings

PATENT
CASE
DIALS
STRAP
A display concept comprising three display devices
representing the hours, minutes and seconds situated
on the same plane as the dial
316L steel
Bezel is 41.5mm in diameter and 11.5mm thick
Microblasted/satin/polished finishes
Water-resistance tested to 5 bars (approximately
50 metres)
Domed bezel with sapphire crystal and double
anti-reflection treatment.
Transp are nt bac k wi th sap phire cr ystal and ant i- re-
flection treatment
Silver, anthracite grey, sunray blue
Rosette-shaped seconds ring
Trilo be-shap ed in dices
Alligator leather with a double folding clasp
Heavy modified self-winding 2892 mecha-
nical movement with an additional patented
module
28’800 alt/h (4 Hz)
42
246
Hours, minutes, seconds subdial displayed
by rotating rings and fixed indices
MOUVEMENT
BALANCE FREQUENCY
FUNCTIONAL RUBIES
FUNCTIONS
TOTAL PIECES IN THE MOVEMENT
limited edition 100 numbered pieces
Technical
specificities
"les matinaux" collection
reference: LM01A18

The Trilobe watch
trilobe for seconds
the rose window for seconds
ring for hours
trilobe for hours
trilobe for minutes
ring for minutes
crown
horns (corn)
waterproofing
transparent back
with sapphire crystal
coat of arms for paris 1st
arrondissement - trilobe birth
coat of arms for
paris handing over of
the inaugural series
coat of arms for
le locle factory
oscillating weight
consecutive number
from 001
serial number

Winding
system
this function allows you to
accumulate the energy necessary
for the proper functioning of your
automatic mechanical watch
The efficiency of automatic winding is directly related to the activity of
the arm to which the watch is attached. Fully wound, your watch has a
power reserve of 42 hours. The accumulated power reserve guarantees
the watch's operation all night long and also ensures a comfortable
reserve of autonomy. However, an automatic watch stored for a few
days stops or no longer has a sufficient power reserve to guarantee
optimal accuracy. To ensure an ideal run in any situation, we encourage
you to manually wind your watch about twenty crown turns clockwise
when you pick it up. Similarly, a watch that has remained stationary
must be reset to the correct time and date, but also wound by about
ten crown turns before being placed on the wrist. If you are not wearing
your watch, make sure to wind it at least once a month. This delays the
ageing of oils and lubricants.
1 2

wearing position
A – Position 1 of the crown when the watch is running. The crown, thus
positioned, guarantees the water-resistance of the watch. After each
use of the crown, make sure it is fully pressed against the case.
setting time position
A – Pull the crown out to position 2. During this time, the rings stop moving.
Turn the crown in either direction to position the trilobes according to
the hours, minutes, seconds of the time you wish.
B – At the time signal, with the trilobe for seconds placed on 0 seconds,
push the crown fully against the case in position 1. The watch starts working
again. The rosette of the small second automatically resumes turning.
Setting your
Trilobe watch
this function allows
your watch to be set
to the time by using
the crown
1 2

Adjusting
the folding
clasp
Opening and closing of the double
folding clasp :
1. Press both push buttons to
release the first folding part of
the clasp
2. Unclip the second folding part
To close your clasp, clip the second
part of the clasp reverse wise and
then the first part
Adjusting your wristband :
Your folding clasp consists of two
fastening elements on the strap,
allowing for maximum safety
1. First, insert your wristband into
the folding clasp at the desired
length
2. Insert the pin into the appro-
priate strap hole
3. Finally, insert the safety pin
under the clasp cover into the
appropriate strap hole, pressing
the cover against the strap

Changing
the strap
and clasp
Tightening or replacing the clasp
If you notice that the hold on your
folding clasp on the wristband
becomes loose, you can tighten
it by using the clamping screws
You can also replace the folding
clasp by loosening the clamping
screws and then insert it into a
different wristband
1. Turn on the flash pump by pulling
it to the center of the strap to re-
move the first part of the wristband
2. Insert one end of the bar of the
new wristband
3. Put the bracelet back on while
activating the flash pump by pul-
ling to the left
4. Release the flash pump
5. Repeat the previous steps for
the other part of the wristband

recommend that you temporarily
replace your leather strap during
this period with a rubber strap
adapted to the model. The leather
wristband must be treated with
special care in order to preserve
its shine and suppleness for as
long as possible. To do this, gently
rub the leather strap with a soft
cloth or microfibre cloth before
storing the watch in its box. The
strap change is easily carried out
thanks to the integrated "flash"
strap change system.
complete overhaul
The accuracy mechanism of Trilobe
watches is particularly sophisti-
cated due to high-end complica-
tions of high-end watchmaking,
which allow brand’s characteristic
way of reading time. It is therefore
recommended to contact our
Trilobe authorized service center
approximately every 3 years for
regular maintenance and every 5
to 7 years for a complete overhaul.
Maintenance
A watch is a sensitive object that
requires care. In order to keep
your watch looking its best, we
recommend that you groom it
regularly.
grooming
A microfiber towel has been pro-
vided with your watch and we
recommend that you gently clean
the case with it so as not to scratch
it. It is also important to close the
crown properly after any time
setting operation.
leather wristband
The life span of a leather wristband
depends on the conditions and
use. To maintain it, we recommend
that you avoid contact with water,
fatty or acid substances, cosmetic
products. We also recommend
that you avoid excessive expo-
sure to sunlight, as UV rays can
affect their coloring. We do not
recommend the use of leather care
products to clean or restore shine
to a wristband. In summer, a leather
strap is subject to more external
aggressions and therefore we

protecting your watch
In case of immersion in seawater or
chlorinated water, we recommend
that you rinse your watch with a
soft cloth soaked in slightly warm
fresh water. Avoid direct contact
with chemical cleaning agents,
solvents, detergents, and other
abrasive and cosmetic products
that may damage the case, wrist-
band or rubber seals.
magnetism
Wearing or placing your watch
near electronic devices that may
generate magnetic fields is de-
trimental to its proper functio-
ning. Magnetic fields are emitted
from different sources, such as
mobile phones, computers, re-
frigerators and other electronic
devices. These magnetic fields
can cause a sudden change in the
accuracy of your watch. Watches
are designed to resist radiation
encountered in everyday life, but
some strong disturbances are likely
to magnetize steel components
of the movement, in particular
the balance-spring. In this case,
contact our after-sales center
so that a watch specialist can
examine your watch and carry
out a simple demagnetization
procedure.
vibrations
Avoid vibrations and impacts on
the watch (golf, tennis, mountain
biking, etc.). Shocks can damage
not only the external parts but also
the accuracy of the movement.
Any damage caused by improper
use of the watch is not covered by
the warranty.
Precautions
temperature
Extreme temperatures or sud-
den variations. The movement of
your watch is a top-of-the-range
precision mechanism that re-
quires to protect it from extreme
temperatures (+60°C, -0°C) and
thermal shocks (e.g. hot springs,
high temperature showers, sauna,
hammam...).
waterproofing
Trilobe watches are water-resistant
to 5 bar/ATM (approximately 50
meters). To ensure that the watch
is waterproof, always make sure
that the crown is pushed against
the case's frame as far as possible,
especially before each use in the
water. In general, we strongly re-
commend that you avoid wearing
your watch for any aquatic activity
and keep it away from the water.
Any damage caused by improper
use of the watch is not covered by
the warranty. Your wristband might
also be damaged.
Never handle the crown underwa-
ter. Trilobe watches are sealed by
safety seals that can be damaged
by natural wear, temperature
changes, shocks or cosmetics. If
condensation appears under the
glass of your watch, it means that
its sealing system is damaged and
it is recommended to contact our
after-sale center.

regularity control
waterproofing control
impact control
temperature control
power reserve control
aesthetic control
We are committed to providing
you with a high product quality
and service level. All our watches
are subject to the highest quality
controls. After a first series of tests,
our watches go through hundreds
of hours of internal quality control
in 6 steps:
Quality

The warranty does not cover the following cases:
· Damage resulting from improper handling;
· Watch’s wearing out;
· Shocks;
· Watch’s loss or theft.
technical warranty
After any intervention carried out with an approved Trilobe repairer, the
work carried out is guaranteed for a period of 12 months. This warranty
does not cover ordinary wearing out or any damage resulting from
improper handling. In the event of damage caused by an unauthorized
repairer, the watch must be repaired at your own expenses.
To be valid, the warranty card must have been duly completed and
signed by Trilobe.
Each Trilobe watch has a unique identification number that testifies
to its authenticity. We provide two types of warranties: the first covers
manufacturing defects, the second covers technical interventions
carried out on the watch.
commercial warranty
Your Trilobe watch is guaranteed against any manufacturing defect
for 24 months from the date of shipment or hand delivery, provided
that the warranty card is signed by Trilobe. Any repair or overhaul work
performed by a third party not approved by Trilobe would automatically
invalidate the warranty.
Warranty

Services
and contacts
Our Trilobe service center is staffed by carefully selected and certified
personnel who meet the highest quality standards. In order to preserve
the value of your Trilobe watch, make sure that it is always examined
by an approved Trilobe watchmaker.
You can obtain a technical service by shipping your watch to our ser-
vice center. Consult our services section on www.trilobewatches.com
Would you like to meet or visit us? Do you have a question? Do you need
some advice? We are at your disposal. Do not hesitate to contact us.
[e-mail]
Direct line: [phone]
Monday to Friday from 9am to 7pm (CET)
Saturday from 9am to 5pm (CET)
Trilobe Watches SAS, 231 rue Saint-Honoré, 75001 Paris, France

TIME. LIBERATED.