
60IN 150L SILVER ANGEL
ITEM NUMBER:TY-A-150L/3W-1(60)
A. Halo
Qty:1pc
B. Head/Upper Body
Qty:1pc
C. Arm
Qty:2pcs
D. Middle body
Qty:1pc
E. Skirt -2 halves F. Wing
Qty:2pcs
G. Flute
Qty:1pc
H. Ground Stake
Qty:4pcs
I. Plastic ties
ASSEMBLY INSTRUCTIONS
STEPS:
(1) Carefully remove all the parts from the box and place on a flat surface. Check the Parts
List to make sure all the parts are included.
(2) Insert the rods on one half of the Skirt (Parts # E) through the matching holes in the other
half of the Skirt. Fasten together with the Plastic Ties (Part # I) at the top and bottom where
the halves join together (See FIG. 1).
(3) Insert the two rods on the bottom of the Middle Body (Part # D) through the matching holes
in the top of the Skirt and insert the rods at the bottom of the Upper body (Part # B) into the
holes on the top of the Middle body (Part#D) to create the completed body section (See FIG.1).
(4) Insert the rods of each Arm (Part # C) into the matching holes in Upper Body. (See FIG.1).
(5) Attach the Wings (Part # F) to the back of the Angel Body by inserting the rods into the
metal holes. (See FIG.2).
(6) Attach the Halo (Part # A) rod into the back of the Head metal hole. (See FIG.2).
(7) Insert the Flute (Part # G) through the each metal hole at the top of each arm. (See FIG.3).
(8) Secure the Angel to the ground with the Ground Stakes (Part # H) (See FIG.3).
FIG.1
FIG. 2
FIG.3