Trinity Basics TBFPB-0931 User manual

OWNER’S MANUAL
TRINITY BASICS 5-TIER 60" x 24" x 72" NSF
WIRE SHELVING RACK w/WHEELS
Model # TBFPB-0931 / TBTPBK-0931 / TBFC-0931 /
TBTZ-0931
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

PARTS LIST
TOP POLE (4)
End Cap (4) and
Pole Connector (4)
pre-installed
A
BOTTOM POLE (4)
Insert (4)
pre-installed
B
SHELF (5)
C
D
SLIP SLEEVE
(40) + (2) extra
FEET LEVELER (4)
For stationary option
E F
G H
NON-LOCKING
CASTER (2)
LOCKING
CASTER (2)
WRENCH (1)
Your TRINITY Basics 5-Tier 60" x 24" x 72" NSF Wire Shelving Rack w/ Wheels should include the
following parts. Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will NOT need additional tools for assembly.
© 2021 TRINITY - 800.985.5506
1
Note: The black circular plastic spacers in between Shelves are used only for packaging
purposes. They are NOT needed. Please discard.

H
STEP 2
B (4) D (8)
ASSEMBLY INSTRUCTIONS
STEP 1
D
B
F (2) H (4)E (2)B (4) G (1)
BB
E / F
G
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at
the desired level no higher than the 3rd indentation from
the bottom. Please make sure the arrow on SLIP SLEEVES
(D) faces up and the word “TOP” right-side up. Do this
for each BOTTOM POLE (B) and make sure slip sleeve
heights are identical for all (4) BOTTOM POLES (B).
Note that each POLE (A & B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock in place on
POLE (A & B).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (B). Do
NOT place more than one pair on each POLE (A & B) at
one time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.
© 2021 TRINITY - 800.985.5506 2
Stationary Option
Screw each FEET LEVELER (H) into the bottom of each
BOTTOM POLE (B). Turn clockwise to screw in place.
Warning: For safety, at least half of the FEET LEVELER
(H) stem must be screwed into BOTTOM POLE (B).
Mobile Option
Screw each CASTER (E &F) into the bottom of a BOTTOM
POLE (B). Turn clockwise to screw in place. Use the
provided WRENCH (G) to tighten completely. Make sure
the locking casters are on the same side.
Use the provided WRENCH (G) to tighten completely.
Failure to do as instructed could result in the caster stem
breaking.

STEP 4
ASSEMBLY INSTRUCTIONS
STEP 3
C (1)
C
Place SHELF (C) on its side and slide the (4) BOTTOM POLES (B)
through the (4) holes in the SHELF (C). Make sure that the
SHELF (C) corner cylinders are positioned over the SLIP
SLEEVES (D).
Stand the unit upright.
Note:
•The level side of the SHELF (C) is the TOP side (the TRINITY
logo on the corner cylinders should be right-side up.)
•Use a rubber mallet, if needed, to secure the SHELF (C).
•For convenience, place BOTTOM POLES (B) with Locking
Casters on the long side of the shelf if the rack will be
pushed against a wall OR if the rack is frequently rolled
around like a cart, place BOTTOM POLES (B) with Locking
Casters on the side being pushed or pulled.
B
B
C
C (1) D (8)
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at a
desired distance between SHELVES (C). Please make sure the
arrow on SLIP SLEEVES (D) faces up and the word “TOP” is
right side up. Do this for each BOTTOM POLE (B), and make
sure that the heights of SLIP SLEEVES (D) on each BOTTOM
POLE (B) are identical.
Lower SHELF (C) over the BOTTOM POLES (B) so that the
corner cylinders of the SHELF (C) are positioned over the SLIP
SLEEVES (D).
Make sure to put SLIP SLEEVES (D) at the desired heights for
each item, installing one shelf at a time.
Note:
Use a rubber mallet, if needed, to secure the SHELVES (C).
© 2021 TRINITY - 800.985.5506
3

ASSEMBLY INSTRUCTIONS
STEP 5
Screw the TOP POLE (A) into the BOTTOM POLE (B). Pole
Connectors are pre-installed in bottom of the TOP POLES (A).
The tops of TOP POLE (A) are indicated by the BLACK END CAP.
Repeat STEP 4 to install (3) SHELVES (C) to complete the
assembly.
C
C (3) D (24)A (4)
A
B
© 2021 TRINITY - 800.985.5506 4

SERVICE PARTS LIST –TBFPB-0931 / TBTPBK-0931 (Black Color)
TRINITY Customer Service provides the following replacement parts:
3
8
4
5
2
76
1
9
10
Part Number Description Part Number Description
1) XBK-01-012-2543 Slip Sleeve 6) ZSV-99-008-4010 Locking Caster
2) PBK-04-006-3600 Top Pole 7) XBK-98-003-2538 Feet Leveler
3) ZSV-01-013-2523 Pole Connector 8) ZSV-99-007-4010 Non-locking Caster
4) PBK-04-042-3600 Bottom Pole 9) XBK-23-004-2517 End Cap
5) XXX-97-002-0001 Wrench 10) PBK-03-029-6024 Shelf
© 2021 TRINITY - 800.985.5506
5

SERVICE PARTS LIST –TBFC-0931 (Chrome Color)
TRINITY Customer Service provides the following replacement parts:
3
8
4
5
2
76
1
9
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 6) ZSV-99-008-4010 Locking Caster
2) CSV-04-006-3600 Top Pole 7) XBK-98-003-2538 Feet Leveler
3) ZSV-01-013-2523 Pole Connector 8) ZSV-99-007-4010 Non-locking Caster
4) CSV-04-042-3600 Bottom Pole 9) XBK-23-004-2517 End Cap
5) XXX-97-002-0001 Wrench 10) CSV-03-029-6024 Shelf
10
© 2021 TRINITY - 800.985.5506 6

SERVICE PARTS LIST –TBTZ-0931 (Chrome Color)
TRINITY Customer Service provides the following replacement parts:
3
8
4
5
2
76
1
9
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 6) ZSV-99-008-4010 Locking Caster
2) ZSV-04-006-3600 Top Pole 7) XBK-98-003-2538 Feet Leveler
3) ZSV-01-013-2523 Pole Connector 8) ZSV-99-007-4010 Non-locking Caster
4) ZSV-04-042-3600 Bottom Pole 9) XBK-23-004-2517 End Cap
5) XXX-97-002-0001 Wrench 10) ZSV-03-029-6024 Shelf
10
7© 2021 TRINITY - 800.985.5506

WARNINGS
Weight capacity per Shelf on Feet Levelers 450 lb (evenly distributed)
Weight capacity per Shelf on Casters 120 lb (evenly distributed)
Total weight capacity of Shelving Rack
(evenly distributed)
2250 lb (on Feet Levelers)
600 lb (on Casters)
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. Tighten all casters completely by using the provided wrench and regularly check and
secure all casters. Failure to do as instructed could result in the caster stem breaking,
thereby causing the product to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of the
environment where the product will be placed and make sure to use the product in a safe
and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product. Any
modifications will void product warranty.
5. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
6. Do NOT overload the product.
7. Do NOT roll the product on an uneven surface. Only move the product on a smooth
surface. Rolling over rough or uneven surface may cause casters to break or items on the
product to fall, resulting in injury and / or damage.
8. Do NOT allow children to climb or play around the product.
9. Load the unit evenly and place the heaviest items on the lower shelves.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
© 2021 TRINITY - 800.985.5506 8

Thank you for purchasing a TRINITY Basics 5-Tier 60" x 24" x 72" NSF Wire Shelving Rack w/ Wheels. In
order to register your product and receive streamlined customer service, please fill out the following
Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration
Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com.
Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2021 TRINITY - 800.985.5506
9

TRINITY Basics 5-Tier 60" x 24" x 72" NSF Wire Shelving Rack w/ Wheels
Model # TBFPB-0931 / TBTPBK-0931 / TBFC-0931 / TBTZ-0931
Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the
TRINITY Basics 5-Tier 60" x 24" x 72" NSF Wire Shelving Rack w/ Wheels (“Product”) that each Product shall
be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
Trinity’s obligation under this warranty shall be limited to repair or replacement of, or adequate
compensation for the Product which shall not be greater than the amount of the purchase price of the
Product, at the option of Trinity, during the warranty period. All replaced parts and Products become the
property of Trinity and must be returned to Trinity.
This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising
from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or
alteration by anyone other than Trinity. The warranty period of 1 year shall not be extended or renewed by
the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is
limited in duration to one year from the date of purchase and is subject to the same conditions and
limitations as is provided for our express warranty.
Except as set forth herein, and to the extent of applicable there are no warranties on this Product either
express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of
merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any
person, firm, or corporation with respect to this product shall be binding on Trinity.
If your Product is defective or otherwise requires service or parts, please call TRINITY Customer Service toll-
free at (800) 985-5506, between 5:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased, the
date of the purchase, and the problem with your Product. A copy of your original purchase receipt must
accompany your service request.
LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates and assigns) shall not be liable for any
incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty,
express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and
attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of
contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As
noted above, to the extent damages are allowed by our express warranty or by applicable law, those
damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser
assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others
and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall
not extend to anyone other than the original purchaser of this product, is nontransferable and states your
exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive
damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
1 YEAR LIMITED WARRANTY
© 2021 TRINITY - 800.985.5506 10

TRINITY Customer Service
TEL: 800.985.5506
FAX: 310.347.4134
EMAIL: customerservice@trinityii.com
Monday through Friday
5:00 AM –5:00 PM (PST)
www.trinityii.com
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or
any problems too big. We’re committed to providing our customers
with the highest level of service.
CONTACT US
This manual suits for next models
3
Table of contents
Other Trinity Basics Rack & Stand manuals
Popular Rack & Stand manuals by other brands

Federal Signal Corporation
Federal Signal Corporation Valor Hook-On manual

Style selections
Style selections LS920-96CA Assembly instructions

Ecco
Ecco 3730 Series Installation and operation instructions

Woodline
Woodline SQUARE METAL BASE PLATE WITH ROLLERS + POLE... Assembly instructions

HAGOR
HAGOR CON-Line T1 installation manual

Crestron
Crestron TS-70 Series quick start guide