Vivo PT-SD-AM01K User manual

Single Pneumatic Monitor Arm for Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pt-sd-am01k
SKU: PT-SD-AM01K
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
WARNING!
A (x1)
Arm
B(x1)
VESA Plate
C(x1)
M6 Thumbscrew
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Slide the arm (A) onto the pole and tighten
using the 6mm Allen wrench (D). The pole must
have a diameter of 35mm (1-3/8”) for the arm
to fit.
TOOLS NEEDED
2.2-19.8lbs
(1-9kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
Attach the VESA plate (B) to the back of the
monitor using bolts (M-A through M-D) and
washers (M-E). If needed, use spacers (M-F)
between the monitor and VESA plate.
D(x1)
6mm Allen
Wrench
M-A (x4)
M4x12
M-B (x4)
M4x16
M-C (x4)
M5x12
M-D (x4)
M5x16
M-E (x4)
D5 Washer
M-F (x4)
Spacer

3
STEP 3
Slide the VESA plate (B) with monitor
over the bracket on the arm (A). Secure
using the M6 thumbscrew (C).
STEP 4
Adjust gas spring support in the arm using the
Allen wrench (D). Turning counter-clockwise
increases support, and clockwise decreases
support.
STEP 5
Remove the bottom cover from the arm (A) by
sliding it forward and o. Organize cables and
re-attach cover.
STEP 6
Adjust tilt support using the Allen wrench (D).

LAST UPDATED: 02/18/2021
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303