Tripp Lite B064-000-STN User manual

1
HDMI KVM over IP
Remote User
Console Station
Model: B064-000-STN
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Este guía esta disponible en español en la página de Tripp Lite:
tripplite.com/support
Ce guide est disponible en français sur le site Web de Tripp Lite :
tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
Quick Start Guide

2
• Standalone HDMI user console station provides remote access to your
B064-IPG KVM over IP switches from one centralized location.
• Enterprise-level Java-free console station replaces a PC, laptop or
notebook computer.
• With no operating system, the console station eliminates the need for
system or software updates and provides security against virus threats
and data protection.
• Monitors the video output of up to 64 servers on the primary display using
panel array mode.
• Virtual media lets you remotely connect storage media to a target server
anywhere on the network.
• HDMI port supports HD resolutions up to 1920 x 1200 @ 60 Hz.
• Included mounting plate enables wall mounting or space-saving 0U rack
mounting.
• B064-000-STN Console Station
• Rubber Feet (x4)
• Mounting Plate
• External Power Supply (100V-240V) with C13 to NEMA 5-15P Power
Cord
• P569-Series High Speed HDMI Cables
Product Features
Package Contents
Optional Accessories

3
• Tripp Lite’s B064-IPG-Series KVM over IP Switch(es)*
• USB Mouse/Keyboard & HDMI monitor
*B064-IPG KVM over IP Switches require firmware version V1.1.102 or above to
support the B064-000-STN.
Front Panel:
System Requirements
Introduction
1Reset Switch
2USB 2.0 Peripheral Ports
3USB Keyboard/Mouse Ports
4Microphone and Speaker
Ports
5Cascade Port
6Power Button (Press once to
enter Standby Mode, press
again to power on the unit)
7Power LED (Power ON: Blue;
Standby: Orange)
1Ground Terminal
2DC Power Supply Input
3LAN Port
4COM (RS-232) Port
5HDMI Port
Rear Panel:
1
1 2 3 4 5
2 3 4 5 6 7

4
The B064-000-STN can be rack mounted or wall mounted. The following
section will guide you through the proper steps.
Rack Mounting
The KVM over IP Console Station is designed to be mounted at the rear of a
rack, where it occupies 0U to save space.
1. Remove two bottom screws on the unit. Use the screws to secure the
mounting plate to the bottom of the unit as shown in Figure 1.
Figure 1: Secure Mounting Plate to Unit
2. Screw the mounting plate to any convenient location in the rear of the
rack.
Note: These screws are user-supplied. M5 x 12 Phillips type I cross screws are
recommended.
Figure 2: Secure Unit to the Rack
Mounting Instructions
M3 x L5 (Countersunk Head)

5
Mounting Instructions
Wall Mounting
1. Remove two bottom screws on the unit. Use the screws to secure the
mounting plate to the bottom of the unit.
Figure 3: Secure Mounting Plate to Unit
2. With a user-supplied screw, use the mounting plate’s center screw hole
to mount the unit to a wall.
Figure 4: Mounting the Unit to a Wall
M3 x L5 (Countersunk Head)
WALL