True-Kare W999 User manual

To charge the Watch use the charger provided
in the package.
When the Watch battery is almost empty, you will
receive an alert on your Web Self Care portal and
on your e-mail, if you haven’t disabled this option.
When the Watch is charging, a steady red light will appear.
11
12 1
10
9
8
7
65
4
2
WATCH GUIDE
When a Watch is synchronized and
connected or has reconnected to the phone,
a green icon appears on the phone screen.
When a Watch is not synchronized or not
connected to the phone, a red icon appears
on the phone screen.
If more than one RFID device is synchronized
with the phone, the red icon will only appear
when all devices are not connected.
5 6 7 8
How does the Watch work on the True-
-Kare phone:
Charging the Watch: Notes: Watch Specifications:
You can have up to 3 RFID devices synchronized with the phone.
The Watch looses connection if it’s out of range or has no battery.
It the battery is empty the red light on the Watch will not blink and
when pressing the SOS button it will not vibrate.
To trigger the SOS procedure, always press the SOS button until it
vibrates at least once (Watch must be ON and connected).
Please configure the SOS procedure according to your needs on the
Web Self Care.
Dimensions (LxWxH): 54.2x43x16.8mm
Frequency: RFID Social Alarm Frequency (869.225 MHz)
Charging: DC 5.0V
Battery: 3.7V 220mAh
Weight: 56.0g
Model: W999
Waterproof
This device is an extension of the True-Kare phone SOS button, it
enables you to activate the SOS procedure even when not close to
the True-Kare phone.
When the Watch is charged, the light on the Watch will be OFF.

How does the Watch work:
Once you have finished the sync process, you can start using
the Watch.
Note: Don’t forget to configure your SOS procedure on the Web Self Care.
Press the Watch button during one vibration to turn
ON the Watch.
Press the Watch button during one to five
vibrations to trigger the SOS procedure
on the phone. A steady red light appears
on the Watch until the SOS procedure is
triggered on the phone.
Press the Watch button during nine
vibrations to turn OFF the Watch (use this
feature only when the Watch is not going
to be used by the phone user, otherwise it
should always be ON).
3 4
Syncing the Watch (RFID device) with the True-Kare phone:
GETTING STARTED
1
Back
OK
Settings
SOS settings
6
7
8
Bluetooth
RFID settings
Back
1
2
Off
RFID Search
RFID Settings
RFID Device
On
press the SOS button on the Watch until it
vibrates). Press the Watch button during seven
vibrations. The light will start to blink. Then
search the device on the True-Kare phone:
Make sure your Watch is charged and turned ON (to turn it ON
2
Back Back
OK
RFID Settings
RFID Device
1
40036204
2
3
RFID Search
Enable table
Search Result
Watch
Select www.true-kare.com
When the Watch is synchronized with the phone but not connected
(not connected means the Watch is not in range), a red light blinks
on the Watch and it makes 3 vibrations.
When the Watch is synchronized and has reconnected to the phone,
it will make a long vibration and the light will stop blinking.
When the Watch is disconnected (not in range) and the SOS button
is pushed, a red light will appear and will stay turned ON. When
the Watch reconnects, the SOS will be triggered automatically.
11111212 11
22
33
44
55
66
77
88
99
1100
11111212 11
22
33
44
55
66
77
88
99
1100
11111212 11
22
33
44
55
66
77
88
99
1100