Trust 350BR User manual

350BR BROADBAND ROUTER
1
UK
A
B C D E F
G
HIJ
K
LM
Product information
A: Power LED
B: LED for WAN port
C: LED for LAN port 1
D: LED for LAN port 2
E: LED for LAN port 3
F: LED for LAN port 4
G: Connection for the mains
power supply
H: LAN port 4
I: LAN port 3
J: LAN port 2
K: LAN port 1
L: WAN port
M: Reset switch
Contents
Steps 1-7 Connecting
Steps 8-26 Internet settings
Appendix A Checking the network settings
Appendix C Resetting the router
Caution: This manual contains
important security and safety
information. Read the entire manual
before connecting the product.

350BR BROADBAND ROUTER
2
Installation
1 Insert the power plug into the power connection (G).
2
Insert the adapter into the plug socket.
3
The power LED (A) will be lit.
If the Power LED is not lit, check:
- The power supply.
- The connections.
4
Connect the modem to the WAN (Internet) port on
the router using the UTP network cable. Turn the
modem on.

350BR BROADBAND ROUTER
3
UK
1 2 3
5
Connect the UTP network cable provided to one of
the LAN ports on the router.
6
Connect the other end of the UTP network cable to
the network connection on the PC.
1. Turn the PC off.
2. Connect the cable to the PC.
3. Start the PC.
7
PC, router and modem are connected.
Router is connected

350BR BROADBAND ROUTER
4
Configuring the Internet connection
(Basic settings)
8
Start an Internet browser on the computer and open the
following page: http://192.168.2.1.
;Æ10
“OK”
9
:ÆAppendix A
“Error”

350BR BROADBAND ROUTER
5
UK
1
2
3
1
2
3
45
1. Time Zone
10
1. Enter the user name.
(Default user name: admin)
2. Enter the password.
(Default password: 1234)
3. Click “OK”.
(User name and password for the router.)
11
Click “Quick Setup” (Wizard)
12
Router Setup wizard:
1. Set the time zone (GMT +01.00).
2. Select the check box for “Enable Daylight
Savings”.
3. Select the start date of daylight savings time.
4. Select the end date of daylight savings time.
5. Click “Next”.
Tip:
Click “Home” to stop. The settings will then not be saved.

350BR BROADBAND ROUTER
6
2. Broadband Type
13
1. Select the type of Internet connection.
2. Click “Next”.
If you do not know the type of Internet connection,
ask your Internet Service Provider.
Tip:
xDSL Internet with PPPoE Æ16
xDSL Internet with router modem (Dynamic/Static IP) Æ14, 15
xDSL Internet with PPTP modem (e.g. “Alcatel speed touch
home”) Æ17.
Cable Internet (Dynamic IP) Æ14, 15
Cable Internet with PPPoE Æ16
Cable Internet with L2TP Æ18.
Type of Internet connection: Dynamic IP
(Cable Modem)

350BR BROADBAND ROUTER
7
UK
3. IP Address Info
Fixed-IP xDSL
1
3
2
4
5
14
A. The Internet Service Provider does not use a
host name or MAC address.
3. Click “OK”.
B. The Internet Service Provider requires a host
name or MAC address (e.g. “@home).
(Contact your Internet Service Provider for more
information.)
1. Enter the host name given to you by
your Internet Service Provider.
2. Enter the MAC address or click “Clone
Mac Address” to copy the MAC address
of the network card (given to you by
your Internet Service Provider).
3. Click “OK”.
*(See the instruction manual provided with the modem or
contact your Internet Service Provider for information about
the settings.)
Æ19
Type of Internet connection: Static IP
(Fixed-IP xDSL)
15
1. Enter the IP address.
2. Enter the Subnet Mask.
3. Enter the DNS server address.
4. Enter the Gateway Address.
5. Click “OK”.
*(See the instruction manual provided with the modem or
contact your Internet Service Provider for information about
the settings.)
Æ19
Type of Internet connection: PPPoE
(PPPoE)
3
1
2
3. IP Address Info
Cable Modem

350BR BROADBAND ROUTER
8
1
2
3
3. IP Address Info
PPPoE
16
1. Enter your user name (e.g. Name@Provider).
2. Enter the PPPoE password.
3. Click “OK”.
*(See the instruction manual provided with the modem or
contact your Internet Service Provider for information about
the settings.)
Æ19
Type of Internet connection: PPTP
(PPTP)

350BR BROADBAND ROUTER
9
UK
2
5
7
4
1
6
8
9
A
B
10
3. IP Address Info
PPTP
17
A. The Internet Service Provider uses PPTP with a
Dynamic IP address.
1. Enter the host name given to you by your
Internet Service Provider (e.g.
“Name@Provider”).
2. Enter the MAC address or click “Clone Mac
Address” to copy the MAC address of the
network card (given to you by your Internet
Service Provider).
3. ÆB7
B. The Internet Service Provider uses PPTP with a
Static IP address.
4. Enter the IP address.
5. Enter the Subnet Mask.
6. Enter the Gateway Address.
7. Enter your user name
8. Enter the PPTP password.
9. Enter the Gateway Address (given to you by
your Internet Service Provider).
10. Click “OK”.
*(See the instruction manual provided with the modem or
contact your Internet Service Provider for information about
the settings.)
Æ19
Type of Internet connection: L2TP
(L2TP)

350BR BROADBAND ROUTER
10
1
2
18
A. The Internet Service Provider uses PPTP with a
Dynamic IP address.
1. Type the host name given to you by your
Internet Service Provider (e.g.
“Name@Provider”).
2. Enter the MAC address or click “Clone Mac
Address” to copy the MAC address of the
network card (given to you by your Internet
Service Provider).
3. ÆB 7
B. The Internet Service Provider uses PPTP with a
Static IP address.
4. Enter the IP address.
5. Enter the Subnet Mask.
6. Enter the Gateway Address.
7. Enter your user ID.
8. Enter the L2TP password.
9. Enter the Gateway Address (given to you by
your Internet Service Provider).
10. Click “Apply”.
*(See the instruction manual provided with the modem or
contact your Internet Service Provider for information about
the settings.)
19
1. Click “OK”.
2. Click “General Setup”.
Altering the administrator password
A
B
5
7
4
1
6
8
9
10
2
3. IP Address Info
L2TP

350BR BROADBAND ROUTER
11
UK
1
2
Password Setup
1
2
3
4
20
1. Click "System”.
2. Click “Password Settings”.
21
Altering the administrator password
This password is required to alter the modem settings at
a later date. Altering the password prevents other people
from altering your settings.
1. Enter the old password (“1234”).
2. Enter a new password. Make a note of the new
password and store it in a safe place.
3. Re-enter the new password.
4. Click “Apply” to confirm the new password.
: Remember the password.
Tip:
- Use a password which consists of both numbers and letters.
- Use at least 8 characters.

350BR BROADBAND ROUTER
12
1
2
3
22
1. Enter the user name.
(Default User name: “admin”).
2. Enter the password.
(The new password)
3. Click “OK”.
(User name and password for the router.)
Checking the Internet settings
23
Click "Status”.
24
Click “Internet Connection”.

350BR BROADBAND ROUTER
13
UK
Internet Connection
25
”Connect” Æ26
”Disconnect”: check the settings Æ13
26
www.trust.com
1. Open your Internet browser.
2. Type www.trust.com in the address bar.
No web page: check the settings Æ13
Ready for use
(See the advanced instruction manual (available in English) included on the CD-ROM for the other settings.)

350BR BROADBAND ROUTER
14
Note:
The router settings page (192.168.2.1) is not available.
- Check the IP settings (see appendix A).
No Internet connection.
- Check the functionality and connection of the modem.
- Check the IP settings (see appendix A).
- The wrong Internet Service Provider settings have been used. Check the WAN (Internet)/Internet
Service Provider settings.
- Some cable Internet Service Providers require a "Host name”. Check the WAN (Internet)/Internet
Service Provider settings. (@home users: Set the Mail Client, SMTP and POP settings to “mail.home.nl”)
No network connecting in Windows (network computers are not visible)
- Make sure the TCP/IP protocol and Client for Microsoft Networks have been installed.
- Make sure the workgroup names are the same. If the workgroup name is not known, use the
workgroup name MSHOME.
- Give the systems access rights to the network. Enable Windows network sharing and encryption.
You have forgotten the password for the router.
- Reset the device (see appendix B).
Go to www.trust.com/14126 for up-to-date FAQs, drivers and instruction manuals.

350BR BROADBAND ROUTER
15
UK
D
E
C
A
Windows XP
B
Appendix A: Checking the network settings
1
Windows XP
Your network settings for automatically assigning
the TCP/IP address:
a. Click “Start”.
b. Select “Settings”.
c. Select “Network Connections”.
d. Right-click the network adapter which is
connected to the modem.
e. Select “Properties”’.
f. Click “Internet protocol”.
g. Click “Properties”.
h. Set the two options to “Automatic”.
i. Close all the windows by clicking the “OK”
buttons. You do not have to restart the
computer.
j. Read the “Internet Explorer” chapter.
2

350BR BROADBAND ROUTER
16
F
G
H
I
Windows 2000
A
B
3
1
Windows 2000
Your network settings for assigning the TCP/IP
address:
A) Right-click the “My Network Places” icon.
B) Select “Properties”’.
C) Right-click the network adapter which is
connected to the modem.
D) Select “Properties”’.
E) Click “TCP/IP”.
F) Click “Properties”.
G) Set the two options to “Automatic”.
H) Close all the windows by clicking the “OK”
buttons. You do not have to restart the
computer.
I) Read the “Internet Explorer” chapter.

350BR BROADBAND ROUTER
17
UK
C
D
E
FG
H
2
3

350BR BROADBAND ROUTER
18
Windows 98 / Me
A
B
C
D
E
F
1
Windows 98 and Windows ME
Your network settings for automatically assigning
the TCP/IP address:
A) Right-click the “Network
Neighbourhood” icon.
B) Select “Properties”’.
C) Click “TCP/IP”.
D) Click “Properties”.
E) Click the “IP Address” tab.
F) Select “Obtain an IP address
automatically".
G) Click the “DNS Configuration” tab.
H) Select “Disable DNS”.
I) Click the “Gateway” tab.
J) Make sure the “Gateway” field is
empty.
K) Close all the windows by clicking
the “OK” buttons. The computer
will be restarted.
L) Read the “Internet Explorer”
chapter.
2

350BR BROADBAND ROUTER
19
UK
A
G
H I
J
K
3
1
Internet Explorer
Open Internet Explorer and carry out the following:
a) Click “Extra - Internet Options”.

350BR BROADBAND ROUTER
20
B
C
D
E
F
2
b) Click the “Connections” tab.
c) Select "Never dial a connection".
d) Click the “LAN Settings” button.
3
e) Unselect all the proxy settings.
f) Click “OK” to close all the windows and save the
settings.
g) Return to step 11.