Tumbl Trak Air Pit User manual

Assembly Instructions
Air Pit
Parts List
Thank you for investing in
the Tumbl Trak Air Pit.
After opening the boxes,
please check the parts list
to make sure all pieces
have arrived in good
condition. If you have any
questions during this
assembly process, please
call customer service at
44 (0)2921 167 949.
B. C.
A.
Parts:
A. Air Pit
B. Electric Pump
C. Adapter

STEP 1 – After unboxing and rolling
out your Air Pit, locate the valve. Re-
move the dust cover by turning
counter clockwise to reveal the valve
pin.
STEP 2 – Before inflating make sure the valve is
closed. To close valve push the pin down and turn a
quarter of the way around. The pin should be slightly
taller than the rim of the valve. Connect the adapter to
the black cone nozzle. Insert black cone nozzle and
adapter onto electric pump. Insert it into the valve by
pushing down and turning clockwise to lock in place.
Turn the pump on to inflate. Put the dust cover on once
inflated.
STEP 3 – To open the valve and deflate the Air Pit
push the pin down and turn a quarter of the way
around. The pin should sit just below the valve rim.
STEP 4 —Make sure the dust cover remains
on the valve both inflated and deflated to
prevent particles from entering the valve.



