TVILUM 97243 User manual

number below.
Toll Free Consumer Assistance
1-800-932-2006
Monday-Friday, 8 a.m. to 5 p.m., EST
STOP!
Missing A Part?
DO NOT
return to store!
The store where you made your
purchase does not stock parts.
If you need parts, whether
they are missing or damaged,
please call our Toll Free
Service is Fast and Free!
Do not exceed. Doing so can result in damage, serious injury or death.
This TV Stand is designed to hold most flat panel monitors up to 95 lbs.
CAUTION
SAFETY INFORMATION. PLEASE READ
97243
Tvilum-Scanbirk / D-Scan
Made in Denmark
Date purchased: Lot #:
(Read from packaging)
29-04-2008
AND KEEP FOR FUTURE REFERENCE.
FLAT PANEL TV STAND
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT
97243-50 1/28
24 lbs
95 lbs
12 lbs 24 lbs
Center support (G)
Leg (H)
Leg (H)
Leg (F)
Bottom (I)
Top panel (L)
Back panel (S)
Shelf (U)
Leg (F)
Back panel (S)
Front Molding
76097
UPC# 872374003143

•
Read all product safety warnings.
Check for damaged or missing parts (see Components & Hardware pages).
To help prevent damage during assembly, the carton can be unfolded and used
as the assembly surface.
Gather all tools necessary prior to assembly.
Take time now to read this entire manual. It will help you become familiar with
all parts and assembly methods.
Manufacturing and shipping of wood based products causes dust to adhere to
component parts. This is a normal characteristic of the packaging and shipping
process and does not mean that any damage has occurred. You may consider
using a non-abrasive household cleaner to clean any soiled panels during or after
the assembly process.
Important!
Assembly Instructions
Before You Begin...
1.
2.
3.
4.
5.
To clean your product, use a soft damp cloth•Do not use Ammonia-based cleaners as they could damage the finish of your product
Product use and care instructions
before proceeding with the assembly
Warning
- DO NOT make modifications to this unit.
It was designed to be assembled in the
manner idicated by this instruction
manual. Modificaton of this unit can result
in serious injury and/or void your warranty.
- All objects MUST BE removed prior to moving
this unit. Unload the unit by starting at the top
and working your way down. Failure to do so
could result in damage, or serious injury.
- DO NOT allow children to climb
on this unit. It could become
unstable and tip over causing
damage, serious injury or death.
- This unit MUST BE placed on a flat level
surface capable of supporting the weight.
Failure to do so could result in the unit
becoming unstable and tipping over causing
damage, serious injury or death.
Product
Safety
Warnings
You must read the following warnings
of this unit.
97243-50 2/28

97243-50 3/28
Flat Head Screwdriver - For CamLocks.
•
the cam should point to the hole on the edge of
- Cams must be inserted properly. The arrow on
this page for detail explanation.
Explanation Of Details
this instruction manual. If needed, please reference
is one half of a turn clockwise.
- Locked position for a cam
- You will see pictorial details being used throughout
the panel.
Tools Needed
Estimated Assembly Time: 2 hours•Assemble on soft surfaces to prevent damage to the product finish•2 people recommended to assemble
Hammer - For Shelf Fitting, Dowels and Feet.
Philips Screwdriver - Cannot exceed 7 inches in length.
Use for Shelf fittings and cam.

x12
10825
x16
11211
x2
31412
x4
63001
x16
11209
x8
31513
x32
20209
x1
94010
x12
31643
S
Shelf
fitting
S
Double end
cam bolt
S
Bottom (I)
Top panel (L)
97243 -50 4/28
Foot
H
Shelf
fitting
bolt
FLeg
G
Front Molding (76097) HLeg
Cam bolt
(Style may vary)
Shelf (U)
4 Same size holes indicates Shelf (U)
F
S
G
Hardware
warning label
Components
Center
cap
Cover
panel
Back
support
2 Smaller inside holes indicates Bottom (I)
Product safety
x1
Wood
Dowel
Wall
attachment
strap
Cam
lock

FREE!
Do not go back to your store!
WE WILL HELP YOU!
Missing or Damaged Parts?
Have Questions about Assembly?
The store where you made this purchase does not
stock parts for this item. If you needs parts (damaged
or missing) or have questions about assembly
Please call our toll free support line or email us.
All orders normally ship within 24 hours.
All Parts and Shipping are
FREE!!!
It’s Fast, Easy, and Free!!!
Toll Free Customer Support
Monday – Friday from 8 am to 5 pm EST.
1-800-932-2006
www.d-scan.com
Order parts anytime through our website:
email: [email protected]
97243 -50 5/28

11209
31643
31643
20209
Back panel (S)
x4
x2
Center support (G)
Make sure arrow
on cam lock points
toward the edge
of the panel
31643
20209
20209
20209
x2
Leg (F)
Install hardware into legs
x2
Leg (H)
Insert dowels into the ends of the legs
Install cam locks and screw in the shelf fitting bolts
Install cam locks and dowels
into the back panels and
center supports
31643
11209
2
1
97243-50 6/28

3
4
97243-50 7/28
the shelves
the shelf fitting into
Bottom (I)
Use a hammer to tap
After installing the shelf fittings,
turn the bottom over to install the cam bolts
Shelf (U)
Bottom (I)
Install hardware
into shelf and bottom
31513
11211
31513
11211
31513
31513
Install cam bolts into top panel
Top panel (L)

to edge faces out
Dowel closest
to edge faces out
Dowel closest
6
5
97243-50 8/28
Attach bottom panel to legs
Bottom (I)
Leg (F)
Leg (H) Place shelf fittings in the bottom panel
over the shelf fitting bolt on the legs.
Tighten fittings.
Leg (H)
Bottom (I)
Back panel (S)
Leg (F)
Center support (G)
Back panel (S)
Attach back panels and center support

8
7
97243-50 9/28
31412
Shelf (U)
Leg
Center support (G)
Bottom (I)
Leg
(F)
(H)
Attach shelf
Place shelf over the
assembly so that the holes
align with the dowels on the
center support.
Tighten fittings
Shelf (U)
Leg
onto the studs.
Install the upper set of
Bottom (I)
(H)
back panels.
Center support (G)
Attach back panels
Back panel (S)
and center support
Tighten Fittings.
Back panel (S)
Back panel (S)
Insert double end cam bolt into holes at
center of shelf.
Place upper center support
Leg
(F)
31412

feet into center of
Attach legs
each leg
double end cam bolt.
Attach feet
Tighten cam at ends of the
Use hammer to tap
Place legs over the assembly.
Tighten fittings.
Leg (F)
Back panel (S)
Leg (F)
Leg (H)
Bottom (I)
Center support (G)
Shelf (U)
Leg (H)
63001
Leg (H)
Shelf (U)
Leg (F) Leg (F)
Bottom (I)
Back panel (S)
Leg (H)
63001
9
10
97243-50 10/28

10825
10825
Leg Leg
Shelf
(H)
Front
Center support
(G)
Back
(U)
Bottom
(I)
Top panel (L) (S)
Back panel
(F)
Back panel
(S)
Leg
(H)
94010
Front(ofTV)
Leg
Leg
(F)
(F)
Leg
Bottom
Shelf
(U)
(H)
(I)
Top panel (L)
Important!
Back(ofTV)
Center support
(G)
Front Molding
(76097)
Install Front Molding, Wall Attachment
Strap and Cam Covers.
Note: Front and Back
of Stand are identical.
Choose which sides will
face out and face wall.
85/8in
85/8in
Base of TV must rest behind front
molding on top of TV Stand.
11
12
97243-50 11/28
94010
Attach top panel
Carefully place top panel over the assembly so that
the cam bolts and dowels align with the holes.
Press top panel firmly into place then tighten cams.
For use as TV-Stand, apply Front
Molding (Part 76097) to Top Panel
(L) by peeling off adhesive back from
bottom of Molding. Position Molding
flush with Top front edge of Panel (L)
and center between inside of legs.
Once positioned, press Molding firmly
to Top Panel. Not necessary for use
as Coffee Table.

Do not exceed. Doing so can result in damage, serious injury or death.
This TV Stand is designed to hold most flat panel monitors up to 95 lbs.
CAUTION
number below.
Toll Free Consumer Assistance
1-800-932-2006
Monday-Friday, 8 a.m. to 5 p.m., EST
STOP!
Missing A Part?
DO NOT
return to store!
The store where you made your
purchase does not stock parts.
If you need parts, whether
they are missing or damaged,
please call our Toll Free
Service is Fast and Free!
•To clean your product, use a soft damp cloth•Do not use Ammonia-based cleaners as they could damage the finish of your product
Product use and care instructions
P.O. Box 1067
5 YEAR WARRANTY: All Tvilum-Scanbirk furniture is warranted to the original purchaser at the time of purchase and for 5 years after the
purchase date. We warrant to you, the original purchaser, that our furniture and all furniture parts and components are free of defects in material
or workmanship. The word “defects” as used in this warranty is defined as any imperfections which impair the use of the furniture. Our warranty
is expressly limited to the replacement or repair of furniture parts and components and Tvilum-Scanbirk will have a reasonable amount of time
to remedy said defect. This warranty applies under conditions of normal use. The warranty does not cover defects caused by improper assembly
or disassembly defects occurring after purchase due to intentional damage, product modifications, exposure to the elements, accidents, misuse,
abuse or negligence and labor or assembly costs.
All implied warranties, including the warranty of merchantability shall not extend beyond the duration of the written warranty stated above.
Tvilum-Scanbirk liability is expressly limited to the costs of material for repair or replacement of defective goods and in no event will Tvilum-Scanbirk
be liable for incidental or consequential damages resulting from use of the product. Some states do not allow limitations on how long
an implied warranty may last or the exclusions or limitations of incidental or consequential damages, so the above limitations and exclusions may
not apply to you.
This warranty gives you specific legal rights which may vary from state to state.
Any claims made under this warranty must be presented in writing to:
d-SCAN
2195 Philpott Road
South Boston, VA 24592
Wall Stud
Attach product safety warning
label part (adhesive side down)
to toppanel "L"
tip over causing damage, serious
injury or death.
topple device to the furniture. In
addition to this, you will need to
choose a screw or fitting which is
suitable for securing the device to the
kind of walls you have. If you are
unsure about what type of screw to
use, please contact your local
hardware store.
IMPORTANT. The screw supplied
together with the Anti-topple device is
to be used only for fixing the Anti- Place the unit against the wall and
fit the Anti-topple strap centrally
in each unit as shown in the detail
above.
If the Anti-topple strap is not used,
the unit could become unstable and
97243-50 12/28

All information provided is confidential and will only be used internally to resolve any issue you may
have and to improve our products. You will not be solicited.
Consumer Information
Phone (optional): E-Mail (optional):
Name (optional): Address (optional):
City: State: Zip:
Gender: Male Female Age: Under 18 18-24 25-34 35-44 45-54 55-64 65 and over
Annual Household Income: Under $20,000 $20k-$34k $35k-$49k $50k-$74k $75k-$100k Over $100k
Ethnicity:
Do you own or rent your home?
Product Information
Model: (VERY IMPORTANT)
Where was the product purchased?
Was the packaging in good condition? Yes No
Was the product in good condition? Yes No
Did you assemble the product yourself? Yes No
Did you consider the product easy to assemble? Yes No
Are you satisfied with the finished product? Yes No
Would you recommend this product to a friend? Yes No
Comments or Suggestions?
We want to hear from you!
Mail To:
d-SCAN
Attn: Customer Service
P.O Box 1067
South Boston, VA 24592
1.
2.
3.
4.
5.
6.
7.
8.
10.
12.Please provide any additional comments involving your experience with this product:
What were the most important reasons
influencing your purchase of this product?
Check all that apply.
Appearance Best Value
Price Trusted Brand Name
Quality Environmentally Friendly
Other
Living Room Family Room/Den
Dining Room Office
Kitchen Childs Room
Other
For what room did you purchase this product?11.
Why were you in the market for this type of product?
Furnishing new room
Redecorating
Replacing broken unit
Accommodate new equipment
9.
or
Call Customer Service
Toll Free
1-800-932-2006
Monday – Friday 8am to 5pm EST.
Caucasian African American Hispanic Asian Other
Own Rent
97243 -50 13/28

97243-50 14/28

La base para TV esta diseñado con espacio para la mayoria de pantallas planas hasta 95 lbs.
Si lo ignora pueda resultar en daños, lesiones graves o la muerte.
PRECAUCIÓN
UPC# 872374003143
24 lbs
95 lbs
12 lbs 24 lbs ¡No hay necesidad de
97243
29-04-2008
1-800-932-2006
-50 15/28
(Vea informacion en la caja)
Lot #:Fecha de compra:
Hecho en Dinamarca
Tvilum-Scanbirk / D-Scan
BASE PARA TV
97243
por favor,llame el número
Lunes a viernes, de 8 a 17 horas, EST
¡ALTO!
regresar al almacén!
CONSEVELO PARA FUTURAS CONSULTAS
SEGURIDAD. POR FAVOR LEALO Y
INFORMACION DEIMPORTANTE
ESTE INSTRUCTIVO CONTIENE
es rápido y gratis!
gratis abajo, ¡El servicio
Es más, la tienda dónde hizo la compra
no surte piezas. Si necesita piezas,
ya sea que faltan o estén dañadas,
¿Le falta una pieza?
Teléfono gratis de atención
al consumidor
Pata (F)
Pata (H)
Pata (H)
Pata (F)
Base (I)
Panel superior (L)
Panel posterior (S)
Estante (U)
Soporte central (G)
Panel
posterior (S)
Moldura frontal
(76097)

Antes de comenzar...
5.
Componentes y Ferreteria).
Para ayudar a prevenir que ocurran daños durante el armado, puede
desdoblar la caja y usarla como una superficie para armar.
lesiones graves o la muerte.
volcarse causando daños,
Podria volverse inestable y
suban por encirna de esta unidad.
- NO DEBE permitir que los niños
Junte todas las herramientas necesarias antes de proceder con el armado.
daños, lesiones graves o la muerte.
vuelva inestable y que se vuelva causando
requerimiento podria causar que la unidad se
soportar el peso. La inobservancia de este
sobre una superficie plana y nivelada capaz de
- SE REQUIERE que esta unidad se coloque
Tome un momento ahora para leer este manual en su totalidad.
resultar en daños o lesiones graves.
inobservancia de este requerirmiento podria
por nivel hasta llegar al nivel inferior. La
el armado de esta unidad.
advertencias antes de proceder con
Usted debe leer las siguientes
la parte superior. Luego, quite lo demás nivel
todos los objetos de la unidad comenzando con
objetos antes de mover esta unidad. Quite
y/o invalidar la garantia.
unidad puede resultar en lesiones graves
instrucciones. Modificatión de esta
del Producto
Aviso
sobre la Seguridad
Advertencias
manera idicada en este manual de
•
Uso de producto e instrucciones de cuidado
No use productos que contengan amoniaco, esto puede dañar el acabado del mueble
• Para limpiar el mueble, humedezca ligeramente un paño con agua
unidad. Su diseĔo exige que se arme de la
de armado o una vez armados.
ligeramente húmedo para limpiar los componentes sucios durante el proceso
¡ Importante !
de embalaje y envio, y no significa que hayan ocurrido daños. Puede usar un paño suave
adhiera polvo a los componentes. Esta situación es normal, resultado de los procesos
Los procesos de fabricación y envio de productos a base de madera hacen que se
- NO DEBE efectuar modificaciones a esta
- ES NECESARIO que se saquen todos los
Debe leer todas las advertencias de seguridad de los productos.
Recise para ver si hayan partes dañadas o faltantes (vea la página de
1.
2.
3.
4.
Instrucciones de Ensemblaje
97243-50 16/28

Destornillador plano - Para las clavijas.
Destornillador de estrías - No más de 7 pulgadas de largo.
Usar para los sujetadores y clavijas.
97243-50 17/28
una explicación detallada.
Martillo - Para los sujetadores, tacos y puntillas.
Si es necesario, favor refiérase a esta página para
utilizados a través de este manual de instrucciones.
hacia la derecha.
de cierre gire media vuelta
- Para alcanzar la posición
hacia el hueco en la orilla del panel.
Herramientas Necesarias
Explicatión De Detalles
apropiada, La flecha en la leva deberá apuntar
- Las levas deberán ser introducidas de forma
- Usted verá los detalles pictóricos que están siendo
Tiempo estimado de armado: 2 horas•Armar sobre una superficie suave para prevenir danos en el•acabado del producto
Se recomienda 2 personas para el armado•

x2
31412
x32
20209
x12
10825
x1
94010
x8
31513
x12
31643
x4
63001
x16
11209
x16
11211
97243 -50 18/28
Moldura frontal (76097)
Perno de
dos cabezas
Componentes
Ferreteria
Soporte central (G)
Tapa
La base tiene 2 agujeros interiores más pequeños
posterior (S)
Panel
x1
Etiqueta de seguridad
del producto
H
Pata
S
S
Taco de
madera
SS
G
Correa de sujeción
a la pared
G
Base (I)
H
F
Pata
Tornillo de clavija
(diferentes tipos)
Clavija Puntilla
F
Panel superior (L)
Tornillo
de sujeción Sujetador
El estante tiene 4 agujeros del mismo tamaño
Estante (U)

Gratis!
No salga de nuestro almacén!
Nosotros podemos ayudarle!
Partes faltantes o danadas?
Precuntas acerca de como armar su mueble?
El almacén donde usted realizo la compra no tiene repuestos
Si usted necesita partes (faltantes o danadas)
o tiene preguntas acerca de como armar el mueble, por favor
Gratuita o envíenos un correo electrónico
Favor comuníquese con nuestra línea 800 de asistencia
Las ordened son despachadas
normalmente en máximo 24 horas
Los repuetas y el despacho son
Gratis!!!
Es Rápido, Fácil, y Gratis!!!
Lunes a Viernes de 8am a 5pm EST.
1-800-932-2006
email: support @d-scan.com
Línea 800 de asistencia gratuita
www.d-scan.com
Ordene los repuestos en cualquier momento a traves de
nuestra pagina web:
97243 -50 19/28

Panel posterior (S)
x4
x2
Soporte central (G)
Asegúrese de que la flecha de la
clavija apunte hacia el agujero
adyacente en el borde del panel
31643
20209
20209
Instale las piezas metálicas en las patas
Pata (F)
x2
x2
Pata (H)
Inserte los tacos en los extremos de las patas
31643
Instale clavijas y tacos en los paneles posteriores y los soportes centrales
1
2
97243-50 20/28
11209
11209
20209
31643
31643
20209