
2650 - Outdoor Hide-&-Slide (CS0754) 06/11/2020
2650
OUTDOOR HIDE-&-SLIDE
Additional Tools Required.
Assembly Instructions.
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
Manufactured by:
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Cumbria CA7 8EW
Adults Required For Assembly.
Maintenance.
Some residual dust from the manufacturing process may be apparent.
This will wipe off with a damp cloth.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.
Weathering Effects.
Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause degradation
of the material, they may however cause the surface to become
slippery, should this occur it is suggested that the surface be
cleaned with a mild detergent before use.Fading may occur if
left in direct sunlight for prolonged periods of time.
THIS PRODUCT WILL NOT PROTECT ANY ITEMS STORED
WITHIN FROM THE WEATHER.